Commit Graph

188 Commits

Author SHA1 Message Date
Kevin O'Connor f2766dbed3 test: Add generic-mellow-super-infinty-hv.cfg to printers.test
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-09-21 14:10:13 -04:00
int_0x03 7a02cde4b7
config: Config for Anycubic 4MaxPro_2.0-2021 (#4557)
This config I created and fully tested on my own printer Anycubic 4Max Pro 2.0. This works fine! Please note that this printer is different from the Anycubic 4MAX.

Signed-off-by: Alexander Usachev <int_0x21@protonmail.com>
2021-09-21 12:56:30 -04:00
Kevin O'Connor 9014677cbd test: Add printer-elegoo-neptune2-v1.2-2021.cfg to printers.test
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-08-31 13:12:15 -04:00
Pedro Lamas 8ad5cbfff5 config: Adds generic config for BigTreeTech SKR E3 RRF 1.1
Signed-off-by: Pedro Lamas <pedrolamas@gmail.com>
2021-08-17 14:48:34 -04:00
Demetrius Apostolopoulos dafb74e3ab
config: New printer profile for Eryone ER20 and minor update for Eryone Thinker Series (#4491)
This config was a community effort and was author and tested by sihawken, 3D.Subzwari & dapostol73.

Signed-off-by: Demetrius Apostolopoulos <dapostol73@hotmail.com>
2021-07-15 14:11:55 -04:00
charlespick 342d0fca78
config: Create config for BigTreeTech Octopus (#4441)
Information and some lines verbatim were sourced from the official BigTreeTech Octopus
GitHub repository to make this configuration as well as existing configurations in the same
folder as this one

Signed-off-by: Charles Pickering <charles.pickering@live.com>
2021-07-09 11:13:26 -04:00
Kevin O'Connor 045bfa4e8d rp2040: Add initial support for the rp2040 mcu
Support the rp2040 (as tested on a Raspberry Pi Pico board).  This
adds basic uart, timer, gpio, and watchdog support.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-07-04 10:11:02 -04:00
charlespick ab8c571070
test: Fix typos related to STM32F446 (#4444)
Signed-off-by: Charles Pickering <charles.pickering@live.com>
2021-06-30 20:09:36 -04:00
Joseph Orduna 274d52729a
config: added a configuration file for FLSUN QQ-S Pro delta printer (#4237)
Signed-off-by: Joseph Orduna <joey.orduna@gmail.com>
2021-06-27 18:27:39 -04:00
Kevin O'Connor e520fb7878 config: Add generic-bigtreetech-skr-cr6-v1.0.cfg and fixes
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-06-14 20:48:55 -04:00
Kevin O'Connor 6dcb902d89 config: Rename generic-buddy.cfg to generic-prusa-buddy.cfg
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-06-14 12:40:36 -04:00
github@matthewlloyd.net 23f466bfce config: Add configs for Prusa Buddy and Mini+
Signed-off-by: Matthew Lloyd <github@matthewlloyd.net>
2021-06-14 12:37:34 -04:00
Kevin O'Connor f00281d1e6 config: Fixes for generic-th3d-ezboard-lite-v1.2.cfg
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-06-08 21:29:52 -04:00
Luke's Lab 080b7f68ca config: Add generic-duet3-mini.cfg
Adds Duet3 Mini Config with support for expansion header

Signed-off-by: Luke Ashley <Luke@Lukeslab.online>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-06-04 17:48:21 -04:00
Jason S. McMullan 913649de2e loop_sdcard: Add loopable SD card file sections
To support continuous belt printing, add nestable repeat
loop support via an `[sdcard_loop]` module.

Supported G-Code:
  - SDCARD_LOOP_BEGIN COUNT=n  ; Loop for N times, or infinitely if N is 0
  - SDCARD_LOOP_END            ; End of loop
  - SDCARD_LOOP_DESIST         ; Complete all loops without iterating

Marlin M808 compatibility example in `config/sample-macros.cfg`:
  - M808 Ln        ; Loop for N times, or infinitely if N is 0
  - M808           ; End of loop
  - M808 K         ; Complete all loops without iterating

Added unit tests in test/klippy/sdcard_loop.test

See https://reprap.org/wiki/G-code#M808:_Set_or_Goto_Repeat_Marker

Signed-off-by: Jason S. McMullan <jason.mcmullan@gmail.com>
2021-05-26 11:57:57 -04:00
Matthew Lloyd 93add3a095
config: Add printer-fokoos-odin5-f3.cfg (#4286)
Signed-off-by: Matthew Lloyd <github@matthewlloyd.net>
2021-05-12 15:00:06 -04:00
Kevin O'Connor 4799d05d42 config: Add generic-ruramps-v1.3.cfg to test cases and minor updates
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-05-12 10:25:41 -04:00
Kevin O'Connor c9e8298c36 config: Minor updates to printer-velleman-k8800-2017.cfg
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-05-06 11:38:31 -04:00
Jason S. McMullan 44387568f3 config: Add Creality CR-30 PrintMill support
Add support for the Creality CR-30 'PrintMill', and its base board,
the Creality v4.2.10.

Add them to the `test/klippy/printers.test` test suite

Signed-off-by: Jason S. McMullan <jason.mcmullan@gmail.com>
2021-05-06 11:07:18 -04:00
Tircown f2c74ec023
kinematics: Add hybrid-corexy and hybrid-corexz (#4229)
Signed-off-by: Fabrice GALLET <tircown@gmail.com>
2021-05-03 14:31:23 -04:00
George Fu fee386b8e2 config: add example configs for fysetc spider board
Signed-off-by: George Fu <nailao_5918@163.com>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-05-03 12:01:00 -04:00
Johannes Stuettgen ed6ab6b9cc screws_tilt_adjust: Add MAX_DEVIATION parameter for bed level invariant.
This is useful when a saved bed mesh is used to ensure that the bed level
has not drifted too far from where it was when the mesh was created.

Signed-off-by: Johannes Stuettgen <johannes.stuettgen@gmail.com>
2021-04-28 11:53:18 -04:00
Kevin O'Connor dfccc872b1 test: Add printer-creality-cr6se-2021.cfg to printers.test
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-04-22 21:18:45 -04:00
Kevin O'Connor c5f1835bec config: Add printer-flashforge-creator-pro-2018.cfg to test cases
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-04-16 13:58:24 -04:00
Kevin O'Connor dcf6d30aba config: Updates to printer-tronxy-x5sa-pro-2020.cfg
Minor updates to use default values.

Also, add to printers.test test cases.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-04-16 00:16:09 -04:00
Kevin O'Connor de8eb884b4 test: Add generic-bigtreetech-skr-2.cfg to printers.test
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-04-13 21:08:24 -04:00
Demetrius Apostolopoulos bf01d6d1f8
config: Added config for Eryone Thinker Series (#4096)
Signed-off-by: Demetrius Apostolopoulos <dapostol73@hotmail.com>
2021-04-07 14:10:59 -04:00
Kevin O'Connor 1eddc0fd90 stm32: Simplify USB/Serial/CANbus Kconfig selection
Combine the various communication options into a single "make
menuconfig" menu item.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-03-18 13:33:33 -04:00
Kevin O'Connor b0f94e50ee test: Add printer-hiprecy-leo-2019.cfg to printers.test
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-03-07 18:58:08 -05:00
Kevin O'Connor a1072be7eb test: Add printer-flsun-q5-2020.cfg to printers.test and minor changes
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-02-22 15:29:34 -05:00
Kevin O'Connor 7e21350989 config: Rename generic-mks-robin-nano.cfg to generic-mks-robin-nano-v1.cfg
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-02-20 10:17:16 -05:00
Kevin O'Connor 83552f6ea6 config: Add example generic-mks-robin-nano-v2.cfg config
Reported by @mks-viva.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-02-20 10:17:16 -05:00
Kevin O'Connor 023eeceb2a config: Add example generic-mks-robin-nano-v3.cfg config
Reported by @mks-viva.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-02-20 10:17:16 -05:00
Kevin O'Connor 093db5172e test: Add printer-robo3d-r2-2017.cfg to printers.test
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-02-19 11:15:49 -05:00
Arek e6d1910ef9
stm32: Add STM32F429 variant (#3926)
* Add F429 variant; add CAN on PD0,PD1; add 25Mhx clock; move CAN1_RX from PI8 to correct position (PI9)

* Add test for STM32F429

Signed-off-by: Arkadiusz Raj <arek.raj@gmail.com>
2021-02-18 20:12:32 -05:00
Kevin O'Connor 319c36df52 config: Update generic-bigtreetech-gtr.cfg
Add generic-bigtreetech-gtr.cfg to printers.test.  Add definitions for
thermocouple and temperature_mcu.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-02-12 17:48:49 -05:00
Kevin O'Connor dfd052511f config: Add generic-mks-rumba32-v1.0.cfg to tests
Also remove copy of lcds from sample-lcd.cfg

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-02-11 18:23:42 -05:00
Elias Bakken 8b443acae8
stm32: Adding support for STM32F031x6 (#3871)
Add support for alt usart 1

Do not select all functions on 16 K mcu

Signed-off-by: Elias Bakken <elias@iagent.no>
2021-02-03 12:23:17 -05:00
Kevin O'Connor 3162f4746f test: Add printer-creality-ender3max-2021.cfg to printers.test
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-02-02 18:16:40 -05:00
Kevin O'Connor bc137f3dd7 test: Add printer-creality-cr6se-2020.cfg to printers.test
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-01-24 10:54:31 -05:00
Kevin O'Connor ee7230893d test: Add printer-longer-lk4-pro-2019.cfg to printers.test
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-01-10 11:21:26 -05:00
Kevin O'Connor 750c157000 config: Add example generic-bigtreetech-skr-mini-mz.cfg config
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-01-09 18:30:04 -05:00
Kevin O'Connor f79187d726 config: Add example generic-bigtreetech-skr-e3-turbo.cfg config file
Reported by @kinggrave.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-01-05 12:04:37 -05:00
Kevin O'Connor 02ece242d1 config: Add example generic-fysetc-s6-v2.cfg config file
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-01-04 01:58:39 -05:00
Kevin O'Connor 074148d983 test: Add printer-creality-ender6-2020.cfg to printers.test
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-21 11:08:24 -05:00
Kevin O'Connor 7dcc778b6c stepper: Calculate step_distance from rotation_distance
Add support for automatically calculating the internal step_distance
from new config parameters - rotation_distance, microsteps,
full_steps_per_rotation, and gear_ratio.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-18 10:30:32 -05:00
Pranas Kiziela 0bebdf11c2 config: Add example printer-twotrees-sapphire-plus-2020.cfg config
Signed-off-by: Pranas Kiziela <pranas.kiziela@gmail.com>
2020-12-15 08:52:24 -05:00
Kevin O'Connor 5773654a00 config: Minor changes to printer-sunlu-s8-2020.cfg
Remove default parameters from heater_fan section.  Add to
printers.test test cases.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-11-26 12:26:11 -05:00
Kevin O'Connor b24a547cfe config: Minor updates to printer-monoprice-select-mini-v2-2018.cfg
Minor indentation changes and remove default values for heater_fan.
Add to printers.test test cases.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-11-25 20:41:39 -05:00
Kevin O'Connor 15b5dbaf8f docs: Move config reference information to new Config_Reference.md
Move all the config reference information from files in the config/
directory to a new Config_Reference.md document.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-11-18 20:10:21 -05:00