5bcf9f02cf
config: Added Anycubic 4Max printer config file
...
Signed-off-by: Christian Toulon christian@bouncy-studio.com
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-03-22 13:02:01 -04:00
541c2990c6
test: Rename atmega2560-16mhz.config to atmega2560.config
...
There's no need to include the 16mhz as basically all atmega chips are
run at 16mhz.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-03-22 12:36:18 -04:00
01c8705d92
config: Add printer-tevo-flash-2018.cfg
...
Reported by @RadianceNL.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-03-14 10:27:37 -04:00
a03e31809f
config: Example config file for a stock 250mm build VORON2 printer
...
Example config file for a stock 250mm build VORON2 printer that
matches the manual diagrams exactly for the controller layout and pins
used.
Signed-off-by: Ben Warren <boffdroid@gmail.com>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-02-13 12:07:20 -05:00
cd6a181429
config: Azteeg X5 mini config ( #1193 )
...
Signed-off-by: Ax Smith-Laffin <ax@darknetweb.co.uk>
2019-02-08 15:00:23 -05:00
0d4544e72a
config: Added example config file for Geeetech gt2560 controller.
...
Signed-off-by: Ales Stimec <ales.stimec@gmail.com>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-01-28 11:20:01 -05:00
275df53b2e
config: Generic board BIGTREETECH SKR V1.1 config
...
Signed-off-by: Rui Caridade <rui.mcbc@gmail.com>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-01-16 09:40:15 -05:00
15da5cc5aa
config: Create generic-fysetc-f6.cfg
...
This is my current config file for Fysect F6 + TMC2208 running on my
Ender 3 with stock creality display.
Signed-off-by: Simone Bonacini <bonacini.simone@gmail.com>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-01-10 09:55:54 -05:00
5dc74f3152
winch: Add experimental support for cable winch kinematics
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-12-24 11:38:59 -05:00
a5cb74d58d
config: Add a generic-minitronics1.cfg example config file
...
Information provided by @BKLronin.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-12-20 11:09:20 -05:00
269305fa23
test: Add printer-creality-cr20-2018.cfg to printers.test
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-12-19 20:51:58 -05:00
e820ea3141
config: Add printer-micromake-d1-2016.cfg example config file
...
Reported by IRC user "Xantos".
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-12-18 20:59:43 -05:00
22f7be8b74
config: Add printer-velleman-k8200-2013.cfg example config
...
Based on config from @PerLangkjaer.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-11-13 10:46:57 -05:00
3da7697c66
config: Add generic duet2 config and tests ( #834 )
...
This adds a generic duet config with quad-z and quad extruders which also tests TMC2660 and SX1509 extras
Signed-off-by: Florian Heilmann <Florian.Heilmann@gmx.net>
2018-10-31 09:58:43 -04:00
e30053f2a9
test: Add printer-adimlab-2018.cfg to printers.test
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-19 11:12:20 -04:00
48ddfba415
test: Add printer-wanhao-duplicator-6-2016.cfg to printers.test
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-09-16 22:45:31 -04:00
00ea4428a3
test: Add recent printer config files to printers.test test case
...
Add printer-tronxy-x8-2018.cfg and printer-anycubic-kossel-plus-2017.cfg.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-07-10 12:04:39 -04:00
cc6b416660
test: Add support for testing klippy with multi-mcu configs
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-06-29 13:52:23 -04:00
5922a1ea1b
test: Add example kinematic config files to printers.test testcase
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-06-29 13:16:50 -04:00
fe676fa099
test: Add Ender2 and ReArm configs to printers.test testcase
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-06-29 13:14:14 -04:00
eb801631b9
test: Add basic klippy regression tests
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-06-16 16:20:49 -04:00
Montbel