Commit Graph

40 Commits

Author SHA1 Message Date
Kevin O'Connor 08adecd226 homing: Prefer printer.command_error() instead of homing.CommandError()
Update callers to use the printer.command_error reference instead of
directly using homing.CommandError() when raising or catching errors.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-09-04 12:10:36 -04:00
Kevin O'Connor f6dd97b784 homing: Remove EndstopError
There's no reason to distinguish between an EndstopError and a
CommandError, so just use CommandError.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-09-04 11:41:57 -04:00
Kevin O'Connor 1f3a160f47 toolhead: Add a move.move_error() helper
Move the EndstopMoveError() code from homing.py to a new method in the
toolhead Move class.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-09-03 16:22:54 -04:00
Kevin O'Connor 739e6e7396 extruder_stepper: Don't directly access extruder member variables
Rework extruder.get_trapq() into extruder.sync_stepper() so that
extruder_stepper.py does not need to directly access the extruder
internals.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-06-06 14:41:15 -04:00
Kevin O'Connor 787ed452c2 klippy: Rename try_load_module() to load_object()
Rename try_load_module() so that it uses consistent naming for
"printer objects".  Change the function to raise an error by default
if the specified module does not exist.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-05-08 11:05:14 -04:00
Kevin O'Connor 9b6010dc7b extruder: Use new GCodeCommand wrappers
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-05-05 11:08:11 -04:00
Kevin O'Connor 17123889f6 heaters: Make heater.py an "extras" module
The heater logic is an independent module that does not need to be
treated as part of the "core" klipper code.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-04-25 14:26:45 -04:00
Kevin O'Connor d858498a53 heater: Move M105 command handling from gcode.py to heater.py
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-04-25 14:26:28 -04:00
Kevin O'Connor 77177582cd extruder: step_distance must be positive on SET_EXTRUDER_STEP_DISTANCE
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-03-28 10:06:02 -04:00
Kevin O'Connor 336af2f28d stepper: No need to pass stepper_kinematics to set_step_dist()
Also, no need to log in stepper.py as the update is already logged in
extruder.py.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-03-28 10:06:02 -04:00
David Smith d4bf61262e
Extruder: Add g-code to set extruder step_distance (#2598)
Signed off by: David Smith <davidosmith@gmail.com>
2020-03-28 09:52:46 -04:00
Simo Apell 90bc1679a2 extruder_stepper: Initial support for synchronized extruder steppers
Signed-off-by: Simo Apell <simo.apell@live.fi>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-01-06 11:03:05 -05:00
Kevin O'Connor 4b6a65c1e0 heater: Do not flush look-ahead queue on a heater temperature update
The print_time parameter of heater.set_temp() is not currently used
and it isn't necessary to flush the look-ahead queue just get the
print_time.  Remove the parameter from heater.set_temp() to avoid
flushing the look-ahead queue.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-01-03 18:13:57 -05:00
Kevin O'Connor d9cd524aec extruder: No need to track extrude_pos locally
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-12-17 02:01:54 -05:00
Kevin O'Connor 46e7027bc7 extruder: Flush step generation on ACTIVATE_EXTRUDER
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-12-17 01:59:06 -05:00
Kevin O'Connor f4c4de1a24 extruder: Move M104/M140 commands from gcode.py to extruder.py
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-12-16 20:16:21 -05:00
Kevin O'Connor fcee27fc19 gcode: Remove builtin T0/T1/T2/... command support
The builtin Tn command is not sufficiently flexible to control some
multi-extruder printers.  Remove the command and encourage users to
define individual gcode_macros for each Tn instance.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-12-10 14:24:32 -05:00
Kevin O'Connor c06618193d extruder: Add an ACTIVATE_EXTRUDER command
Add support for an extended g-code command to change the currently
active extruder.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-12-10 14:23:13 -05:00
Kevin O'Connor 080ee0b512 kin_extruder: Apply pressure advance in kin_extruder.c
Implement the pressure advance calculations while performing the
definitive integral calculations.  This simplifies both the
extruder.py and kin_extruder.c code.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-12-08 20:41:35 -05:00
Kevin O'Connor 282af0220e toolhead: Report the current extruder from the get_status() method
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-11-24 20:21:13 -05:00
Kevin O'Connor 89d1ab7c04 extruder: Remove support for lookahead() method
Now that the extruder lookahead method is no longer used it can be
removed from the toolhead and extruder classes.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-11-21 13:18:21 -05:00
Kevin O'Connor 5f5896ad71 extruder: Add support for instantaneous corner velocity
Add mechanism to perform look-ahead between moves with different
extrusion ratios.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-11-21 13:18:21 -05:00
Kevin O'Connor 6d0c55b6c1 extruder: Initial support for "smoothed pressure advance"
Support averaging the extruder position over a time range to "smooth
out" the velocity changes that occur during pressure advance.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-11-21 13:18:19 -05:00
Kevin O'Connor d00023f3bb toolhead: Support step generation in lead up to and after stepper activity
Add support for kinematic functions that calculate step times based on
a range of the motion queue.  This requires adding additional pause
times when fully flushing the motion queue.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-11-21 13:17:45 -05:00
Kevin O'Connor 0a39c339c7 gcode: Remove explicit active extruder tracking
There's no need to have special logic in gcode.py to track the active
extruder.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-11-13 11:02:26 -05:00
Kevin O'Connor bfb34e0701 stepper_enable: Move motor_off() logic to stepper_enable.py
Directly disable all the stepper motors on a global motor_off() from
the StepperEnable() class in stepper_enable.py.  This simplifies the
toolhead and kinematic classes.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-11-12 17:32:18 -05:00
Kevin O'Connor ed610a6600 extruder: Consistently use "extruder" for the primary extruder
No longer allow the primary extruder to be named "extruder0".  This
avoids internal and external confusion between the printer objects and
config section names.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-11-07 16:28:47 -05:00
Kevin O'Connor 5500538fc5 toolhead: Rename register_move_handler() to register_step_generator()
Rename the function so it is more clear what the step generation code
path is.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-11-07 10:59:35 -05:00
Kevin O'Connor 2981bd601b extruder: Treat extrude with Z only movement to be an "extrude only" move
Do not apply max_extrude_cross_section check, and do apply
extrude_only_xxx checks to Z only moves that also extrude.  Some
printer start scripts will prime the extruder while moving the Z.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-11-07 09:45:36 -05:00
Kevin O'Connor 86121ff79e toolhead: Calculate and store axes_r in move class
Calculate the ratio of axis distance to total move distance (axis_d /
move_d) and store in a new member variable axes_r.  This avoids
needing to recalculate the value in other code.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-11-06 15:51:51 -05:00
Kevin O'Connor 1acaaa98c2 trapq: Remove move_fill()
Now that all callers use the trapq system to queue moves, it is no
longer necessary to individually allocate and fill a 'struct move'.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-11-06 15:51:51 -05:00
Kevin O'Connor 9845d0d103 extruder: Convert step generation to use trapq system
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-11-06 15:51:51 -05:00
Kevin O'Connor e60ee861f8 extruder: Use template evaluation on gcode
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-06-07 11:38:43 -04:00
Janar Sööt 9155886c21 extruder: add get_status method
Signed-off-by: Janar Sööt <janar.soot@gmail.com>
2019-06-04 11:44:57 -04:00
Kevin O'Connor 1731fbbca4 gcode: Change respond_info() to log by default
It makes sense to log most respond_info() content, so do that by
default.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-03-04 13:04:18 -05:00
Kevin O'Connor d7e8264d92 extruder: Wrap code to 80 columns
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-02-27 13:07:41 -05:00
john-- f6c9150349 heater: take a gcode_id when setting up a heater (#1028)
Allow an arbitrary gcode_id to be supplied during heater setup. This allows future extras to register additional IDs beyond B, and T#.

Signed-off-by: John Jardine <john@gprime.net>
2019-01-02 17:44:02 -05:00
Kevin O'Connor 97590b8e0b extruder: Don't use max_extrude_cross_section in max_extrude_only defaults
Some users increase max_extrude_cross_section to avoid issues with
some slicers.  However, increasing that value also increases the
defaults for the max_extrude_only parameters which is not obvious.
Base the max_extrude_only defaults only on the configured nozzle
diameter.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-25 19:09:47 -04:00
Kevin O'Connor a31c31aed4 mcu: Enhance itersolve stepper kinematics allocation
Allocate the stepper_kinematics directly in mcu.py - that way the
kinematic classes don't have to interact with the chelper code.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-07-13 11:37:36 -04:00
Kevin O'Connor 8faab46ed2 toolhead: Move kinematic modules to new kinematics/ directory
Move extruder.py, cartesian.py, corexy.py, and delta.py to a new
kinematics/ sub-directory.  This is intended to make adding new
kinematics a little easier.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-07-12 22:50:25 -04:00