Commit Graph

80 Commits

Author SHA1 Message Date
Kevin O'Connor 8b9cc62359 stm32: Rename stm32f4/ directory to stm32/
Now that the code in stm32f4/ can handle both stm32f1 and stm32f4
chips, rename the directory to just "stm32".

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-08-05 11:25:40 -04:00
Kevin O'Connor 745a8dc0ac config: Add an example config file for the bigtreetech skr mini
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-07-30 21:42:20 -04:00
Kevin O'Connor a34613cf86 config: Add a simplified Duet2 Eth/Wifi example config file
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-07-11 10:35:22 -04:00
Kevin O'Connor e2d8a6f02d config: Rename generic-duet2.cfg to generic-duet2-duex.cfg
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-07-11 10:35:22 -04:00
Kevin O'Connor 4df78cd843 tmc: Configure "intpol" field from TMCMicrostepHelper
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-06-28 16:59:26 -04:00
Kevin O'Connor e5f74a64ed polar: Add initial support for multiple bed rotations
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-06-28 10:00:40 -04:00
Kevin O'Connor cf0a42ed6b test: Fix SET_TMC_FIELD test cases
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-06-24 08:05:45 -04:00
Stephan Oelze ec9fad758a tmc2209: Initial support for tmc2209 stepper driver
Signed-off-by: Stephan Oelze <stephan.oelze@gmail.com>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-06-23 11:26:20 -04:00
Kevin O'Connor c3467f5b35 config: Add generic-printrboard-g2.cfg config file
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-06-21 23:12:31 -04:00
nzlrhyz 631c3fe052 config: Create printer-wanhao-duplicator-i3-plus-mark2-2019.cfg
Reported by @nzlrhyz.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-06-18 10:13:41 -04:00
Kevin O'Connor e697fc11af config: Add an example config for the Duet2 Maestro
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-06-12 22:14:41 -04:00
Kevin O'Connor 64214255da test: Flush moves in quad_gantry_level and z_tilt_adjust tests
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-06-12 15:36:32 -04:00
Kevin O'Connor c037d273f7 test: Add quad_gantry_level and z_tilt_adjust test cases
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-06-12 13:49:27 -04:00
Kevin O'Connor 5de9f74525 test: Add test cases for tmc drivers
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-06-10 14:18:58 -04:00
Kevin O'Connor 8b00580884 gcode_macro: Parse variable_X parameters using ast.literal_eval()
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-06-07 19:33:31 -04:00
Kevin O'Connor 2b8dca5dbf probe: Move multi-sampling capability from ProbePointsHelper to Probe
This changes the config file so that the configuration of
multi-samples is now done in the [probe] (and [bltouch]) section
instead of the various delta, bed_mesh, z_tilt, etc. config sections.

With this change, PROBE and PROBE_CALIBRATE commands now also utilize
multi-sampling.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-06-06 10:08:58 -04:00
Kevin O'Connor d065787afc gcode_macro: Add support "x in printer" to templates
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-06-04 12:41:28 -04:00
Kevin O'Connor 52e7e52119 test: Add a macros.test test case for testing gcode_macro
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-06-04 09:50:30 -04:00
Kevin O'Connor c54b8da530 gcode: Add support for SAVE_GCODE_STATE and RESTORE_GCODE_STATE commands
Add commands to save and restore the current g-code state.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-05-31 10:23:56 -04:00
Kevin O'Connor 84bae6ff41 mcu: Fix reserve pin check
Fix typo causing conflict with mcu name and constant name.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-05-21 09:40:13 -04:00
Kevin O'Connor f444177bb4 test: Add printer-creality-ender5-2019.cfg to printers.test
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-05-01 15:27:11 -04:00
Kevin O'Connor 12e6aaf316 config: Updates to kit-zav3d-2019.cfg
Minor updates to the kit-zav3d-2019.cfg to make it look more like
other config files: specify the micro-controller type, use the
klipper3d.org site for documentation links, avoid using SAVE_CONFIG
sections in the example configs, add config to printers.test.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-05-01 14:50:06 -04:00
Aleksander Sobolewski ccc1107dbe config: Generic board BIGTREETECH SKR V.1.3 config
Signed-off-by: Aleksander Sobolewski <aleks.sobolewski@outlook.com>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-04-05 19:56:22 -04:00
Eugene Krashtan b822f38923 stm32f0: New target STM32F0 added.
Signed-off-by: Eugene Krashtan <Eugene.Krashtan@opensynergy.com>
2019-03-24 12:10:11 -04:00
Montbel 5bcf9f02cf config: Added Anycubic 4Max printer config file
Signed-off-by: Christian Toulon christian@bouncy-studio.com
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-03-22 13:02:01 -04:00
Kevin O'Connor 541c2990c6 test: Rename atmega2560-16mhz.config to atmega2560.config
There's no need to include the 16mhz as basically all atmega chips are
run at 16mhz.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-03-22 12:36:18 -04:00
Kevin O'Connor 01c8705d92 config: Add printer-tevo-flash-2018.cfg
Reported by @RadianceNL.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-03-14 10:27:37 -04:00
Kevin O'Connor d3f6dad853 controller_fan: Allow multiple controller_fan sections to be defined
It may be necessary to define multiple fans, so allow each config
section to be named.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-03-10 13:57:01 -04:00
Rui Caridade 5c0a2479be screws_tilt_adjust: Add new screws_tilt_adjust tool (#1367)
Signed-off-by: Rui Caridade <rui.mcbc@gmail.com>
2019-03-08 11:47:17 -05:00
Kevin O'Connor d62a41b930 manual_stepper: Add support for moves with acceleration
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-03-03 13:38:10 -05:00
Douglas Hammond b6589406d4 temperature_sensor: Add generic temperature sensor support
Signed-off-by: Douglas Hammond <wizhippo@gmail.com>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-02-26 13:15:56 -05:00
Kevin O'Connor 80c8bd8b4d bed_screws: Add a helper tool for leveling bed screws
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-02-24 00:49:47 -05:00
Boffgithub a03e31809f config: Example config file for a stock 250mm build VORON2 printer
Example config file for a stock 250mm build VORON2 printer that
matches the manual diagrams exactly for the controller layout and pins
used.

Signed-off-by: Ben Warren <boffdroid@gmail.com>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-02-13 12:07:20 -05:00
Kevin O'Connor 2d7c3a84ee manual_stepper: Add an "extras" module for manually controlling a stepper
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-02-12 13:38:13 -05:00
Kevin O'Connor 35ea4a137d probe: Add PROBE_CALIBRATE command
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-02-12 13:20:32 -05:00
AxMod 3D Print cd6a181429 config: Azteeg X5 mini config (#1193)
Signed-off-by: Ax Smith-Laffin <ax@darknetweb.co.uk>
2019-02-08 15:00:23 -05:00
Ales Stimec 0d4544e72a config: Added example config file for Geeetech gt2560 controller.
Signed-off-by: Ales Stimec <ales.stimec@gmail.com>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-01-28 11:20:01 -05:00
Kevin O'Connor 7327394c50 adc_temperature: Add support for linear interpolation of resistances
Add support for performing linear interpolation between a set of
measured temperature/resistance pairs.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-01-21 21:28:25 -05:00
Rui Caridade 275df53b2e config: Generic board BIGTREETECH SKR V1.1 config
Signed-off-by: Rui Caridade <rui.mcbc@gmail.com>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-01-16 09:40:15 -05:00
Florian Heilmann 6256599a6d src: Rename source folders for atsam and atsamd architectures
Signed-off-by: Florian Heilmann <Florian.Heilmann@gmx.net>
2019-01-12 20:14:50 -05:00
SimoneBnc 15da5cc5aa config: Create generic-fysetc-f6.cfg
This is my current config file for Fysect F6 + TMC2208 running on my
Ender 3 with stock creality display.

Signed-off-by: Simone Bonacini <bonacini.simone@gmail.com>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-01-10 09:55:54 -05:00
Kevin O'Connor 75ad16ea1a sam3: Add support for sam4s8c chips
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-01-07 19:34:31 -05:00
Kevin O'Connor 94c86d6c6c sam3: Merge sam4e8e support into sam3 code
Most of the peripherals on the sam4e8e are similar to the ones on the
sam3x8e mcu.  Merge the code together and use just one code directory.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-01-07 19:33:26 -05:00
Kevin O'Connor 5dc74f3152 winch: Add experimental support for cable winch kinematics
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-12-24 11:38:59 -05:00
Kevin O'Connor ec9cb3a1b3 polar: Experimental support for polar kinematics
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-12-24 11:38:59 -05:00
Kevin O'Connor a5cb74d58d config: Add a generic-minitronics1.cfg example config file
Information provided by @BKLronin.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-12-20 11:09:20 -05:00
Kevin O'Connor 269305fa23 test: Add printer-creality-cr20-2018.cfg to printers.test
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-12-19 20:51:58 -05:00
Kevin O'Connor e820ea3141 config: Add printer-micromake-d1-2016.cfg example config file
Reported by IRC user "Xantos".

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-12-18 20:59:43 -05:00
Kevin O'Connor e0b2d7c51d bltouch: Add a BLTOUCH_DEBUG command
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-12-03 22:52:32 -05:00
Kevin O'Connor aac92ffb91 bltouch: Fix bug - must restore stepper position after homing
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-12-01 22:09:06 -05:00