Commit Graph

671 Commits

Author SHA1 Message Date
C. Bluoss 77c486029a
config: Added Config For Creality CR6 SE With Board Revision 4.5.3 (#4147)
Both heater pins changed in this revision.

Signed-off-by: Christoph Bluoss <mail@christoph-bluoss.de>
2021-04-22 21:13:54 -04:00
Kevin O'Connor c5f1835bec config: Add printer-flashforge-creator-pro-2018.cfg to test cases
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-04-16 13:58:24 -04:00
le-Bark 47f2899e37
config: Config for the flashforge-creator-pro (#4156)
Signed-off-by: Marc-André Denis <marcadenis@msn.com>
2021-04-16 13:55:42 -04:00
Kevin O'Connor dcf6d30aba config: Updates to printer-tronxy-x5sa-pro-2020.cfg
Minor updates to use default values.

Also, add to printers.test test cases.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-04-16 00:16:09 -04:00
TheBugLebowsky f6cb1d0450
config: Create printer-tronxy-x5sa-pro-2020.cfg (#4144)
A working configuration example for Tronxy X5SA Pro printer (https://tronxy.com/x5s-series/x5sa-pro.html) with no Touchscreen funcionalities because separated LCD firmware needed.
Silent TMC2225 drivers soldered on board.
The Self-levelling plate sensor is a blue Tronxy XY-08N model.
Direct Drive is a Titan Extruder Clone "3:1" gear ratio.

Signed-off-by: Morgan Barresi <morganfw@gmail.com>
2021-04-16 00:12:03 -04:00
popshansen b8186ac4cf
config: Add example generic-bigtreetech-skr-2.cfg config (#4160)
Signed-off-by: Lars R. Hansen <popshansen@hotmail.com>
2021-04-13 21:06:16 -04:00
le-Bark eb4abdd830
pca9533: RGB support for the mightyboard (#4150)
Signed-off-by: Marc-André Denis <marcadenis@msn.com>
2021-04-09 17:47:16 -04:00
le-Bark 317402d5ba
hd44780_spi: added lcd support to the mightyboard (#4121)
Signed-off-by: Marc-André Denis <marcadenis@msn.com>
2021-04-07 21:07:23 -04:00
Demetrius Apostolopoulos bf01d6d1f8
config: Added config for Eryone Thinker Series (#4096)
Signed-off-by: Demetrius Apostolopoulos <dapostol73@hotmail.com>
2021-04-07 14:10:59 -04:00
Kevin O'Connor 34bf8a04c7 config: Comment updates for recent "make menuconfig" updates
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-03-29 20:00:26 -04:00
Justin Schuh 20c96a8300 config: Update printer-robo3d-r2-2017.cfg
Improvements and fixes based on feedback:
 * Make speeds and limits more conservative
 * Fix Y endstop position
 * Improve IR bed leveling
 * Fix filament runout pin

Signed-off-by: Justin Schuh <code@justinschuh.com>
2021-03-27 12:55:17 -04:00
Kevin O'Connor 681ca5be62 config: Do not use beagleboard aliases in example config files
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-03-25 10:49:17 -04:00
Kevin O'Connor 165b4cb63f config: Don't use sanguino aliases in example config files
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-03-25 10:49:17 -04:00
Kevin O'Connor f2c51cd729 config: Don't use arduino due aliases in example config files
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-03-25 10:49:17 -04:00
Kevin O'Connor 7a443e50e1 config: Don't use arduino mega aliases in example config files
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-03-25 10:49:17 -04:00
Kevin O'Connor d386500788 config: Don't use arduino aliases in example-xxx.cfg files
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-03-25 10:49:17 -04:00
Kevin O'Connor 4f66a467e3 config: Create new sample-aliases.cfg with standard aliases
Create a sample-aliases.cfg with all the aliases that are currently
hardcoded in the klippy.pins.py module.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-03-25 10:49:17 -04:00
Tomas Rimkus 31823745b3
config: Fix extruder1 step_pin in Robin Nano V2 example (#4098)
Fixed extruder1 step_pin in MKS Robin Nano V2 example config.

Signed-off-by: Tomas Rimkus <sandshrew@gmail.com>
2021-03-23 10:52:10 -04:00
Kevin O'Connor 1eddc0fd90 stm32: Simplify USB/Serial/CANbus Kconfig selection
Combine the various communication options into a single "make
menuconfig" menu item.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-03-18 13:33:33 -04:00
Michael Kurz b4437f8eee
bme280: Add support for BMP280 and BME680 sensors (#4040)
This adds support for BMP280 and BME680 sensor ICs,
along with fixing calibration data readout for BME280.

Gas sensor readout for the BME680 is just the raw compensated value.
To get actual meaningful values, more research is needed.

Signed-off-by: Michael Kurz <michi.kurz@gmail.com>
2021-03-15 11:50:29 -04:00
Bob90 3233ec08f4
config: Ender5Plus add filament sensor (#4031)
Added filament sensor. I found this by multimeter and have used it many times.

Signed-off-by: R.Garford-Tull <rgarford@gmail.com>
2021-03-14 22:04:45 -04:00
Kevin O'Connor b0f94e50ee test: Add printer-hiprecy-leo-2019.cfg to printers.test
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-03-07 18:58:08 -05:00
TheBugLebowsky 75275bad7c
config: New configuration printer-hiprecy-leo-2019.cfg (#4021)
A working configuration example for Hiprecy Leo printer (https://www.hiprecy.com/product/402/) with no Touchscreen funcionalities because separated LCD firmware needed.
TMC2130 SPI drivers.
The Self-levelling plate sensor is PINDA probe type
Direct Drive is a BMG "3:1" gear ratio

Signed-off-by: Morgan Barresi <morganfw@gmail.com>
2021-03-07 18:53:46 -05:00
Oleksii Zelivianskyi 9a0e1e9bd4
config: fan pin number correction for Robin Nano 3 (#4005)
There are two fan pins on Robin Nano 3 and the fan1 pin is PC14, not PB1.
PB1 pin that was in config example is used for the fan2 output.

Signed-off-by: Oleksii Zelivianskyi <alexeyzel@gmail.com>
2021-02-28 16:17:21 -05:00
FrY Sennberg 1c1c517913
confifg: Update printer-flsun-q5-2020.cfg (#4000)
we just found a small problem: Some people have slightly higher endstop positions, which caused them to have a move out of range during probe calibrate. 

Signed-off-by: Christoph Frei <fryakatkop@gmail.com>
2021-02-28 09:59:20 -05:00
Oleksii Zelivianskyi 9df07530c6
config: EXP2 header pin correction in Robin Nano 3 (#3997)
According to Robin Nano v3 pinout the correct pins for:
- EXP2_4 is PE10
- EXP2_6 is PA7

Signed-off-by: Oleksii Zelivianskyi <alexeyzel@gmail.com>
2021-02-28 09:57:53 -05:00
Kevin O'Connor a1072be7eb test: Add printer-flsun-q5-2020.cfg to printers.test and minor changes
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-02-22 15:29:34 -05:00
FrY Sennberg 8f52816419
config: add Flsun Q5 config (#3915)
In cooperation with chaosdrucker

Signed-off-by:  Christoph Frei <fryakatkop@gmail.com>
2021-02-22 15:26:03 -05:00
Kevin O'Connor 7e21350989 config: Rename generic-mks-robin-nano.cfg to generic-mks-robin-nano-v1.cfg
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-02-20 10:17:16 -05:00
Kevin O'Connor 83552f6ea6 config: Add example generic-mks-robin-nano-v2.cfg config
Reported by @mks-viva.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-02-20 10:17:16 -05:00
Kevin O'Connor 023eeceb2a config: Add example generic-mks-robin-nano-v3.cfg config
Reported by @mks-viva.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-02-20 10:17:16 -05:00
Kevin O'Connor 093db5172e test: Add printer-robo3d-r2-2017.cfg to printers.test
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-02-19 11:15:49 -05:00
Justin Schuh 3790118890
config: Add printer-robo3d-r2-v2.1.5.cfg printer config (#3931)
Adds Robo3D R2 printer config (successfully tested).

Signed-off-by: Justin Schuh <code@justinschuh.com>
2021-02-19 10:47:31 -05:00
Ben 03b3cff823
config: Correct Ender 6 BLtouch params (#3888)
Fixed bltouch offset and bed_mesh mesh_min/max to account for offset.

The former was defined in the wrong coordinate, as the origin starts from the SW. The latter did not include the offset and caused an error. Technically the offset allows mesh_max up to (239.3, 253).

Signed-off-by: Ben Kaye <benkaye001@gmail.com>
2021-02-18 19:28:43 -05:00
Kevin O'Connor 319c36df52 config: Update generic-bigtreetech-gtr.cfg
Add generic-bigtreetech-gtr.cfg to printers.test.  Add definitions for
thermocouple and temperature_mcu.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-02-12 17:48:49 -05:00
Kevin O'Connor dfd052511f config: Add generic-mks-rumba32-v1.0.cfg to tests
Also remove copy of lcds from sample-lcd.cfg

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-02-11 18:23:42 -05:00
popshansen f0d6fa2b32
config: Add generic config for the MKS Rumba32
Contains sample of TMC2209 configuration and display mappings

Signed-off-by: Lars R. Hansen <popshansen@hotmail.com>
2021-02-11 18:21:26 -05:00
Chad Schwieterman 84f8f93e8e
config: Add printer config for the Ender 3 Max by Creality3D (#3879)
Added Ender 3 Max config. Based off the configs from ender6, ender3-v2, and ender3. Also contains optional BLTouch parameters.

Signed-off-by: Chad Schwieterman <chad.devops@gmail.com>
2021-02-02 18:14:11 -05:00
Kevin O'Connor bc137f3dd7 test: Add printer-creality-cr6se-2020.cfg to printers.test
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-01-24 10:54:31 -05:00
KoeRt888 d5f274fc0f
config: Add base configuration file for Creality CR6-SE (#3708)
Signed-off-by: Carlo Hoffmann <KoeRtGit@outlook.com>
2021-01-24 10:52:14 -05:00
Kevin O'Connor 5b9beb52f6 config: Warn about prusa einsy boards in generic-einsy-rambo.cfg
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-01-20 10:52:23 -05:00
Kevin O'Connor e74d5d57b2 config: Add comments to known skr boards with broken thermistor circuits
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-01-18 20:25:49 -05:00
Steven Snyder 64097cb0d0
config: Updates to TAZ6 single extruder config (#3750)
The Lulzbot TAZ6 single extruder configuration had an XY position for
z homing that did not match the factory firmware, and was off center
enough to cause the extruder to crash into the home button trim
sometimes when homing. This commit changes the printer config so
that the XY position for Z homing matches the original Marlin firmware
for this printer.

The Lulzbot TAZ6 single extruder configuration had an bed_tilt points
that did not match the factory firmware, and were off enough that the
nozzle (used for probing on this printer) could slip off the edge of
the probe point or miss it entirely. This commit changes the printer
config so that the coordinates for bed_tilt calibration match the
original Marlin firmware for this printer.

For the Lulzbot TAZ6 single extruder config, use 'gear_ratio' and
'rotation_distance' to configure the extruder.

The rotation distance is based on effective circumference of the hobbed
bolt based on the original Marlin firmware for the TAZ6 single-extruder,
and the gear ratio was determined by simply counting the number of
teeth on the pinion and spur gears.

Signed-off-by: Steven T. Snyder <github@steventsnyder.com>
2021-01-14 11:01:58 -05:00
Timothée Girard 185719f52a
config: Add config file for Longer3D LK4 Pro (#3712)
Signed-off-by: Timothée Girard <timgir@timotheegirard.com>
2021-01-10 11:19:34 -05:00
Kevin O'Connor 2ae732a13a docs: Note the BMG extruder is actually 50:17 and not 3:1
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-01-10 10:59:43 -05:00
Kevin O'Connor 750c157000 config: Add example generic-bigtreetech-skr-mini-mz.cfg config
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-01-09 18:30:04 -05:00
Kevin O'Connor f79187d726 config: Add example generic-bigtreetech-skr-e3-turbo.cfg config file
Reported by @kinggrave.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-01-05 12:04:37 -05:00
Kevin O'Connor 02ece242d1 config: Add example generic-fysetc-s6-v2.cfg config file
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-01-04 01:58:39 -05:00
Sean McGroty c1ac6a6f6a
Add Creality Ender 6 configuration (#3661)
Signed-off-by: Sean McGroty <sean@darkon.net>
2020-12-21 10:49:38 -05:00
Kevin O'Connor 49f1ee0207 config: Update example configs to use rotation_distance
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-18 10:38:49 -05:00