Commit Graph

353 Commits

Author SHA1 Message Date
Kevin O'Connor 3e1c42da80 thermistor: Add support for printers with an "inline_resistor"
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-06-02 10:59:23 -04:00
Kevin O'Connor 7f04dc46d0 config: Update M600 in sample-macros.cfg to use SAVE_GCODE_STATE
Save and restore state in the example M600 macro.  Also, add
pause_resume config section.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-05-31 10:29:09 -04:00
Kevin O'Connor a5f82612a0 config: Add START_PRINT and END_PRINT examples to sample-macros.cfg
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-05-31 10:27:42 -04:00
Kevin O'Connor 8f5277c36a config: Formatting changes to sample-macros.cfg
Reformat some of the comments.  Add section headers.  Don't comment
out the config sections (so that it is more clear what needs to be
copied to the main config).

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-05-31 10:27:38 -04:00
Kevin O'Connor 500f37821d docs: Improve bltouch v3 documentation
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-05-26 11:09:32 -04:00
Kevin O'Connor 9e1d79500a config: Add "CR10 stockdisplay" to generic-bigtreetech-skr-v1.3.cfg
Reported by @povlhp.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-05-25 12:16:54 -04:00
Kevin O'Connor 61530138a0 config: Force PB0 high in fysetc f6 config
There are reports that SPI does not work correctly on the Fysetc F6 if
the PB0 (sdcard cs enable line) isn't pulled high.  Update the default
config to enable that line.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-05-24 18:07:41 -04:00
Kevin O'Connor bd5c1d7088 config: Advise against using hardware_pwm for fans
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-05-23 19:29:24 -04:00
Stephan de7ead1783 tmc5160: Add support for TMC5160 steppers (#1637)
Signed-off-by: Stephan Oelze <stephan.oelze@gmail.com>
2019-05-20 16:29:37 -04:00
Billy Jones 8d19351ea0 config: Add Creality Ender 5 2019
This config is based on the existing Ender 3 example config but some of 
the directions for the steppers have been reversed. It works for me so 
far, but feel free to modify.

Signed-off-by: Billy Jones <billyajones@gmail.com>
2019-05-01 15:25:42 -04:00
Kevin O'Connor a0f2d54743 config: Add comments to generic-fysetc-f6.cfg for extruder1/2 pins
Reported by @SimoneBnc.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-05-01 14:56:11 -04:00
Kevin O'Connor 12e6aaf316 config: Updates to kit-zav3d-2019.cfg
Minor updates to the kit-zav3d-2019.cfg to make it look more like
other config files: specify the micro-controller type, use the
klipper3d.org site for documentation links, avoid using SAVE_CONFIG
sections in the example configs, add config to printers.test.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-05-01 14:50:06 -04:00
Nurmukhamed Artykaly 493d74acda config: Zav3d example config (#1571)
Zav3d - a popular russian corexy plywood printer.

Official web site is https://www.zav3d.ru/

Social network community is https://vk.com/zav3d

Signed-off-by: Nurmukhamed Artykaly <nurmukhamed.artykaly@hdfilm.kz>
2019-05-01 14:40:17 -04:00
fess 0a9e3b744c quad_gantry_level: Limit maximum adjustment
safety feature that prevents quad_gantry_level from trying to do a
correction that might break things - if your probe fires early for
whatever reason and tries to do an 8mm correction in one corner instead
we abort if a correction is over a configurable limit by default 4mm

configurable via `max_adjust` parameter in the config

Signed-off-by: John "Fess" Fessenden <fess@fess.org>
2019-05-01 14:35:24 -04:00
Kevin O'Connor b6637c6c73 config: Add button support for anet a8
Reported by @noud-github.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-04-19 10:43:22 -04:00
Dmitry 1b92af6078 display: Add ST7567 display support (#1540)
Signed-off-by: Dmitry Budaev <condemil@gmail.com>
2019-04-15 21:07:29 -04:00
Janar Sööt 0a392b6543 menu: initial support for analog buttons (#977)
Signed-off-by: Janar Sööt <janar.soot@gmail.com>
2019-04-14 11:18:52 -04:00
Kevin O'Connor 62bdc2709f config: Update generic-bigtreetech-skr-v1.3.cfg with e0/e1 defs
Use the HE0 for the extruder0 heater and add comments describing the
nominal extruder1 pins.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-04-06 16:18:15 -04:00
Janne Grunau 478a916f51 replicape: add support for Linux hardware PWM (#1443)
The servo pins (P9_14/P9_16) are muxed to the SOCs hardware PWM unit
driven by a 13MHz GP timer. They have to be driven by the linux host
mcu. This commits adds hardware PWM support using the linux sysfs
user space interface.

The servo pins can be specified as "replicape:servo0" and
"replicape:servo1". Removes the "servo0_enable", "servo1_enable"
configuration parameters.
Fixes #1105.

Signed-off-by: Janne Grunau <janne-3d@jannau.net>
2019-04-06 13:51:51 -04:00
Kevin O'Connor 8c54fc8753 config: Minor change to generic-bigtreetech-skr-v1.3.cfg
Interpolate is enabled by default.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-04-05 20:07:13 -04:00
Aleksander Sobolewski ccc1107dbe config: Generic board BIGTREETECH SKR V.1.3 config
Signed-off-by: Aleksander Sobolewski <aleks.sobolewski@outlook.com>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-04-05 19:56:22 -04:00
Kevin O'Connor 1c56ba0ca7 config: Update generic-bigtreetech-skr-v1.1.cfg - make flash should now work
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-04-05 19:51:10 -04:00
Kevin O'Connor 0615ab5f89 docs: Note the use of bus enumerations in Config_Changes.md
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-04-04 18:30:04 -04:00
Kevin O'Connor bc9fd03dab atsamd: Use enumerations for buses and reserve pins
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-04-04 18:29:31 -04:00
Kevin O'Connor 7e8ecfe177 atsam: Use enumerations for buses and reserve pins
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-04-04 18:29:31 -04:00
Kevin O'Connor be6b29fabf sx1509: Convert code to use generic i2c bus support
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-04-04 18:29:30 -04:00
Arksine 2e16be224e uc1701: make contrast configurable
Signed-off-by:  Eric Callahan <arksine.code@gmail.com>
2019-04-02 15:53:16 -04:00
Douglas Hammond c105adc80b temperature_fan: Fix. Temperature fan min speed should be used (#1405)
Signed-off-by: Douglas Hammond <wizhippo@gmail.com>
2019-03-28 14:07:40 -04:00
Kevin O'Connor 74f9da8376 config: Update description of printer-tevo-flash-2018.cfg
Reported by @RadianceNL.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-03-24 10:56:20 -04:00
Kevin O'Connor 9aadc3c7fa docs: Also note that driver_VSENSE was removed from tmc2660 driver
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-03-22 22:40:42 -04:00
Kevin O'Connor 871e028c27 config: Document the [include] directive
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-03-22 20:48:15 -04:00
Kevin O'Connor 3945905420 config: Minor rearrangement of example-extras.cfg
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-03-22 20:46:37 -04:00
Kevin O'Connor efab177645 docs: Note tmc2660 driver_HEND default change from 6 to 3
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-03-22 20:41:32 -04:00
Montbel 5bcf9f02cf config: Added Anycubic 4Max printer config file
Signed-off-by: Christian Toulon christian@bouncy-studio.com
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-03-22 13:02:01 -04:00
Matt Baker f2fbe98454 bed_mesh: enable relative offset bed meshes (#1323)
Adds parameter for bed meshes to be adjusted relative to a probed point
during calibration. This allows the probe z offset to be ignored for
probes that are not stable over time (for example, the thermal drift of
inductive probes). An endstop other than the probe is then necessary to
determine the bed-nozzle offset.

Signed-off-by: Matt Baker <baker.matt.j@gmail.com>
2019-03-21 10:39:22 -04:00
Kevin O'Connor 53290664ee pins: Document support for '~' to enable pull-down resistors
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-03-17 21:07:31 -04:00
Kevin O'Connor 378402b4d6 config: Update extra extruder pins in generic-rumba.cfg
Reported by @jakep82.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-03-14 11:48:25 -04:00
Kevin O'Connor b455f1fbe1 config: Reduce the stepper current in the example printrboard config
Reported by @drphil3d.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-03-14 10:44:02 -04:00
Kevin O'Connor 01c8705d92 config: Add printer-tevo-flash-2018.cfg
Reported by @RadianceNL.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-03-14 10:27:37 -04:00
Kevin O'Connor d3f6dad853 controller_fan: Allow multiple controller_fan sections to be defined
It may be necessary to define multiple fans, so allow each config
section to be named.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-03-10 13:57:01 -04:00
Kevin O'Connor 19c7955f2a config: Improve the description of z_tilt z_positions
Reported by @sensille.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-03-10 12:24:34 -04:00
Kevin O'Connor f5b10f0c13 lpc176x: Add support for flashing via "make flash"
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-03-08 22:22:41 -05:00
Rui Caridade 5c0a2479be screws_tilt_adjust: Add new screws_tilt_adjust tool (#1367)
Signed-off-by: Rui Caridade <rui.mcbc@gmail.com>
2019-03-08 11:47:17 -05:00
Kevin O'Connor fcaa75f014 config: Update default spi speed in tmc2660 description
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-03-08 11:27:50 -05:00
Kevin O'Connor 563bc37073 tmc2130: Rename driver_BLANK_TIME_SELECT to driver_TBL
Use the field names from the trinamic specification.  This makes the
field similar to all the other driver_XXX config options.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-03-08 11:25:19 -05:00
Florian Heilmann e96b71a9a3 tmc2660: Use helper functions for register access and simplify TMC2660 parameters
sense_resistor is now a mandatory parameter for tmc2660 blocks. Duet2 users should use a value of 0.051

Signed-off-by: Florian Heilmann <Florian.Heilmann@gmx.net>
2019-03-08 11:04:14 -05:00
Florian Heilmann 4541f16cd9 tmc2660: Add vsense_resistor config parameter
Signed-off-by: Florian Heilmann <Florian.Heilmann@gmx.net>
2019-03-08 11:04:14 -05:00
Kevin O'Connor 47d51d8613 config: Update verify_heater description
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-03-08 10:55:46 -05:00
Benoit Miller 8e8063a9d9 config: Fixed Duet2 reversed heater/fan output pins (#1350)
Using the Duet2 config as a base for your own config will no longer turn
on all heaters and fans at full power during the (almost inevitable) MCU
shutdown that will occur during initial Klipper setup.

Signed-off-by: Benoit Miller <github@benoitmiller.ca>
2019-03-04 13:37:38 -05:00
Kevin O'Connor d62a41b930 manual_stepper: Add support for moves with acceleration
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-03-03 13:38:10 -05:00