9be2250431
config: IMPROVED FYSETC F6 CONFIGURATION ( #1985 )
...
Since the previous config file was laid out only for TMC2208 drivers and was missing most other pins, I made a comprehensive configuration file, with hardware names for all available functionality.
Signed-off-by: Tobias Weiß <t.weiss@bk.ru>
2019-09-18 09:42:17 -04:00
3a37d4a208
safe_z_home: Hop only if necessary and add option to move xy back
...
Once a hop is performed, it will only be re-issued if the z-axis has been
moved in the meantime. Usually it is only moved by a z-homing so doing so
will cause safe_z_home to do the hop on the next homing action.
When z-axis is homed, x and y positions are known. When setting this
boolean option, these are set back to their last positions.
Whenever a hop is specified it is re-issued after the Z axis has been
homed. This is especially necessary when a pressure-based probe is used.
Also, the module decides if a hop is necessary, based on either a known
Z position or a flag that is set whenever the motors are disabled.
Signed-off-by: Nils Friedchen <Nils.Friedchen@googlemail.com>
2019-09-18 09:37:33 -04:00
80775faa09
config: Fix grammar and typos for the new arc config ( #1968 )
...
Signed-off-by: Piotr Usewicz <piotr@layer22.com>
2019-09-18 09:27:47 -04:00
661fb613c7
config: Add display section to printer-wanhao-duplicator-6-2016.cfg
...
Reported by @KeiferMiller.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-09-14 19:52:19 -04:00
2b3cd8db7f
config: Move sections around in example-extras.cfg
...
Move the sections around in example-extras.cfg to try and group like
functionality together.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-09-13 15:32:23 -04:00
dd46e38628
config: Lower bigtreetech-skr-mini-e3 driver voltage ( #1955 )
...
As per 18e6772010
2019-09-13 12:26:10 -04:00
1ac5c55359
config: Update bigtreetech-skr-mini-e3 to be more similar to ender3 config
...
The SKR mini E3 is marketed as being for the Ender 3, so it makes
sense for the example electronics config to be more similar to the
Ender 3 config.
Reported by @TheDogee.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-09-13 12:19:16 -04:00
7d8c70363a
gcode_arcs: Add support for G2/G3 commands
...
R Still missing, also might be somewhat dirty since code is converted
into G1 commands.
Signed-off-by: Aleksej Vasiljkovic <achmed21@gmail.com>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-09-13 11:57:54 -04:00
361de30ad1
config: Note adc_voltage and pullup_resistance in adc_temperature module
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-09-11 00:31:48 -04:00
49779f13a2
filament_switch_sensor: Add a delay between dispatch of pause and execution of pause gcode
...
Signed-off-by: Eric Callahan <arksine.code@gmail.com>
2019-09-08 20:42:43 -04:00
0f1fcb017f
config: Add example generic-bigtreetech-skr-pro.cfg config
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-09-05 22:42:48 -04:00
1e3f6125fb
config: Add a description of the EXP1/EXP2 pin locations to sample-lcd.cfg
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-09-01 12:49:28 -04:00
e47fa04a6f
config: Add the "Fysetc Mini 12864Panel" to the example lcd configs
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-08-31 22:22:19 -04:00
04db5f95d2
config: Minor formatting change to sample-lcd.cfg
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-08-31 19:00:52 -04:00
f7f6680bf6
config: Use position_endstop=0 for Creality printers
...
The default position_endstop=0.5 is causing confusion for some new
users - change the default to 0.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-08-31 11:43:02 -04:00
5e2c60bd67
config: Add example config files for the Fysetc Cheetah boards
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-08-31 11:02:44 -04:00
f21f66a31f
config: Add example SKR mini-E3 config
...
Signed-off-by: Ashley Izat <ashleyi100@googlemail.com>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-08-29 10:19:05 -04:00
67ddac776d
config: Update bigtreetech skr boards to define EXP1/EXP2 plugs
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-08-19 21:40:20 -04:00
e817b85b78
config: Update several config files to use board aliases for lcd
...
Add a sample-lcd.cfg with the defintions for several common "reprap"
style LCD displays that use the EXP1/EXP2 plugs. Update several
config files to add EXP1/EXP2 board aliases.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-08-19 12:57:59 -04:00
bfbcb90751
board_pins: Add a new "extras" module to support per-board pin aliases
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-08-19 12:57:59 -04:00
a482ddf582
tmc2209: Add support for sensorless homing
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-08-19 12:05:09 -04:00
96fdb6ef36
uc1701: Add support for a reset line on SSD1306 displays
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-08-17 22:14:02 -04:00
9c40394248
config: Note that samples_tolerance can be used in the bltouch config
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-08-17 15:15:49 -04:00
a3980cebcc
neopixel: Add support for WS2811 RGB pixel color order
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-08-09 20:58:49 -04:00
3d38211b8a
extra: Add Safe Z home extra
...
Signed-off-by: Florian Heilmann <Florian.Heilmann@gmx.net>
2019-08-09 20:49:17 -04:00
09f323a038
config: Update example stepper amps in generic-printrboard.cfg
...
Reported by @Grumps49.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-08-09 20:43:23 -04:00
383fb1dbfd
config: Fix pins for E6 in generic-duet2-duex.cfg
...
Signed-off-by: Florian Heilmann <Florian.Heilmann@gmx.net>
2019-08-07 11:01:23 -04:00
4c09d8bf02
dotstar: Initial support for "dotstar" LEDs
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-08-06 19:44:32 -04:00
a730aec8bc
tmc_uart: Add support for configuring the uart address on tmc2209 chips
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-07-31 13:02:27 -04:00
745a8dc0ac
config: Add an example config file for the bigtreetech skr mini
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-07-30 21:42:20 -04:00
a878831d5e
mcp4728: Update to better match printrbot revf requirements
...
Reported by @Grumps49.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-07-26 11:02:56 -04:00
46041f5411
neopixel: Add support for daisy-chained chips
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-07-23 21:59:38 -04:00
abf3fa4b71
neopixel: Add support for setting a default color at startup
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-07-23 21:59:38 -04:00
4d90b60fdb
config: Fix example beeper pin in generic-bigtreetech-skr-v1.3.cfg
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-07-18 11:15:02 -04:00
b7bc96c3b2
neopixel: Add initial support for "neopixel" leds
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-07-12 21:44:01 -04:00
25438a7901
config: Simplify generic-bigtreetech-skr-v1.3.cfg
...
Move the TMC2208 and TMC2130 blocks to later in the file.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-07-12 08:28:10 -04:00
b2a8b0dd65
config: Update default serial setting of generic-duet2-duex.cfg
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-07-11 10:35:22 -04:00
a34613cf86
config: Add a simplified Duet2 Eth/Wifi example config file
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-07-11 10:35:22 -04:00
e2d8a6f02d
config: Rename generic-duet2.cfg to generic-duet2-duex.cfg
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-07-11 10:35:22 -04:00
0343d0c73a
firmware_retract: Remove z_hop support
...
The current z_hop support did not work correctly with common slicers
that change Z height between retract and unretract, and it did not
work correctly with slicers that issue a retract at the end of a print
and then at the beginning of the next print.
The z_hop support is therefore being removed until these issues can be
fixed.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-07-10 19:25:56 -04:00
a477c50592
config: Heater pins are inverted on the Duet2 Maestro
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-07-10 13:23:59 -04:00
e19a41d0dd
docs: Add documentation for [delayed_gcode]
...
Signed-off-by: Eric Callahan <arksine.code@gmail.com>
2019-07-01 11:09:30 -04:00
02e579f578
config: Fix stepper_bed step_distance description in example-polar.cfg
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-07-01 11:00:37 -04:00
57eb0e8975
docs: Update for latest changs to skew_correction
...
Signed-off-by: Eric Callahan <arksine.code@gmail.com>
2019-06-29 10:58:46 -04:00
7947dc3389
config: Use tmc2660 virtual_enable in generic-duet2.cfg
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-06-28 16:59:26 -04:00
b0c459d8bf
config: Use tmc2208 virtual_enable in generic-duet2-maestro.cfg
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-06-28 16:59:26 -04:00
a2e550d1cd
stepper: Add support for providing a list of pins to enable
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-06-28 16:59:26 -04:00
7702f0a027
tmc: Add support for virtual enable pins
...
Add support for enabling the stepper via the communication channel.
This improves support for boards with a shared enable line.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-06-28 16:59:26 -04:00
e5f74a64ed
polar: Add initial support for multiple bed rotations
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-06-28 10:00:40 -04:00
a3b4543c97
skew_correction: add documentation
...
Signed-Off-By: Eric Callahan <arksine.code@gmail.com>
2019-06-26 20:16:35 -04:00
towe96