2d173f51b1
pru: Add documentation and install scripts for running on the PRU
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-07-05 14:21:32 -04:00
3af87e1c42
avr: Add SIMULAVR build option; don't show WATCHDOG or SERIAL_BAUD_U2X
...
Add a CONFIG_SIMULAVR option to the Kbuild menus and don't directly
prompt users for CONFIG_WATCHDOG or CONFIG_SERIAL_BAUD_U2X. The only
reason to disable these options would be if one were running on
simulavr. This simplifies the user visible menu options.
Also, only show CONFIG_CLEAR_PRESCALER for at90usb1286 chips.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-05-28 11:04:59 -04:00
f91a49c65d
docs: Note how to handle odd corner in Pressure_Advance.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-05-25 13:39:16 -04:00
4b8ad3fc03
docs: Add a prerequisites section to Pressure_advance.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-05-22 12:32:20 -04:00
e8aabbb40b
docs: Add Todo item for supporting custom fan and pin config sections
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-05-22 11:55:41 -04:00
5c4cc0d646
pwmcmds: Export the maximum PWM value
...
Instead of assuming the maximum PWM value is 255, export a constant
from the firmware to the host with the maximum value.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-05-15 14:02:59 -04:00
8f1d0c2a7c
docs: Note version 0.4.0 release
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-05-03 14:32:36 -04:00
02549c9299
docs: Make it clear a RESTART is likely needed in Installation document
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-05-03 11:15:27 -04:00
b5062a07d1
docs: Recommend users stop klipper before flashing the micro-controller
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-05-01 12:08:45 -04:00
4112007314
docs: Reword XY+Z delta moves in Kinematics
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-05-01 11:58:32 -04:00
a3162b17d9
docs: Use only single space at start of new sentence
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-05-01 11:58:32 -04:00
e177d4f70d
docs: Reword smoothed look-ahead description in Kinematics
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-05-01 11:58:32 -04:00
631b0e6c37
docs: Improve wording of slow lookahead description
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-04-27 16:05:26 -04:00
a7f339ad1c
docs: Improve documentation for those starting in docs/
...
Those that reach Klipper via github may jump directly to the docs/
directory in search of documentation. Add README.md and rework
Overview.md with that in mind.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-04-27 16:05:26 -04:00
c1c0b2dd38
docs: Avoid using "firmware" in the documentation
...
The term "firmware" is ambiguous - it could refer to the entire
project (host and micro-controller software) or to just the
micro-controller software. Avoid the term in the documentation.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-04-27 15:59:33 -04:00
d7a1111955
docs: Add backticks around commands in Firmware Commands
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-04-27 12:10:38 -04:00
d73340474b
docs: Use "look-ahead" instead of "lookahead" in Code Overview
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-04-27 12:02:15 -04:00
4f7237de44
docs: Update Firmware Commands document with an integer example
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-04-27 12:00:10 -04:00
4096745a58
docs: Use a markdown link to docs/prints/square.stl
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-04-27 12:00:09 -04:00
a97e074022
docs: Kinematics document image updates
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-04-27 12:00:09 -04:00
917c6aa94a
docs: Todo updates
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-04-27 09:52:38 -04:00
56d4422d31
docs: Reword alternate linux machine in installation instructions
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-04-24 09:39:40 -04:00
e507848a8f
docs: Remove "experimental" from descriptions
...
The Klipper software has progressed to the point where it does not
need to be described as "experimental" software.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-04-24 09:31:39 -04:00
70599667cb
docs: Installation updates
...
Recommend using 'make flash' and clean up the octoprint instructions.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-04-24 09:21:21 -04:00
1878da228d
build: Add workaround to suppress broken avr-gcc "misspelled" warnings
...
Detect avr gcc v4.8.1 and then disable warnings during the klipper.o
linking to suppress bogus "misspelled signal handler" warnings.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-04-24 08:54:10 -04:00
ec805aee2e
scripts: Add octopi installation scripts
...
Add a system startup script so that Klipper can automatically start at
boot time. Create an installation script that will install the system
dependencies and the startup script.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-04-21 10:14:27 -04:00
167b18b58f
gcode: Ignore M21 command
...
No need to recommend users disable "SD card support" in octoprint -
instead, just ignore the M21 command.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-04-20 10:11:10 -04:00
19ffaa9ff0
docs: Reword parts of the pressure advance kinematics description.
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-04-19 20:48:23 -04:00
0f5167a407
docs: Misc image updates
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-04-19 19:55:50 -04:00
563ab5caa5
docs: Add info on delta acceleration limits
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-04-19 19:54:48 -04:00
db5b5f121c
docs: Add initial Pressure Advance tuning document
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-04-19 16:02:11 -04:00
1f417a8441
docs: Update Todo - initial kinematic document written
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-04-15 22:59:34 -04:00
b74b09ea7a
docs: Updates to Features document
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-04-15 22:52:36 -04:00
2cce67ad84
docs: Add initial Kinematics document
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-04-15 22:26:03 -04:00
839725e3c5
queuelogger: Automatically roll log file
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-04-14 09:58:34 -04:00
a3a45b5037
docs: Update Todo - RPi power over USB now implemented
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-04-13 14:18:48 -04:00
dc645d76b4
docs: Reword and reformat parts of move code flow in Code_Overview
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-04-13 14:08:02 -04:00
daff83ee9a
hub-ctrl: Add support for micro-controller reset via RPi usb power toggling
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-04-13 13:20:13 -04:00
8491b1f86a
docs: Update Features document with latest performance benchmarks
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-04-11 13:53:33 -04:00
a7b4d70cc6
docs: Add documentation on how to run the graphstats.py script
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-04-11 13:41:11 -04:00
050008f3c8
docs: Update Debugging.md file with python virtual env setup
...
Direct readers to the main Installation file to setup the python
virtual environment and remove the outdated instructions in the
Debugging file.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-04-11 12:49:12 -04:00
70e53cb080
docs: Update Firmware_Commands with recent end stop changes
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-04-11 12:36:29 -04:00
ca6245e974
docs: Update Code Overview document with code flow for a typical move
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-04-10 22:10:49 -04:00
49bdc6fbd1
corexy: Initial corexy kinematic implementation
...
Add initial support for corexy kinematics.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-04-03 17:27:14 -04:00
384c853a39
docs: Update benchmark results in Features document
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-03-31 17:50:36 -04:00
6d05dd07f5
sched: Move timer dispatch loop to board code
...
Rename sched_timer_kick() to sched_timer_dispatch() and move its loop
into its callers in the board code. This eliminates the need to
export timer_try_set_next() from the board code.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-03-30 11:24:42 -04:00
3238256b79
docs: Update benchmark results in Features document
...
Some additional tweeks to the scheduler has resulted in minor
improvements to the stepper benchmarks.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-03-26 23:31:33 -04:00
1d796a4e24
mcu: Support config mechanism for translating seconds to clock ticks
...
Introduce a TICKS() macro during config parsing that will translate
time in seconds to time in clock ticks.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-03-13 00:38:17 -04:00
0f2478b62f
docs: Update benchmark results in Features document
...
Recent scheduler optimizations have made a minor improvement to the
stepper benchmarks.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-03-11 12:23:24 -05:00
944d176856
sched: Rename sched_timer() to sched_add_timer()
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-03-11 11:14:06 -05:00
Kevin O'Connor