3diy
/
klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
1,906 Commits 1 Branch 0 Tags 27 MiB
Commit Graph

1048 Commits

Author SHA1 Message Date
Kevin O'Connor 946eb6b7ae atsamd: Add definitions for SAMD21E18 chip 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-03-01 19:05:00 -05:00
Kevin O'Connor d57bc79513 atsamd: Use the full micro-controller name for CONFIG_MCU 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-03-01 19:03:34 -05:00
Kevin O'Connor 027f52087c gcode: Improve handling of end of input when reading from a debug file 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-03-01 10:06:44 -05:00
Arksine 3c79e484d5 filament_switch_sensor: initial implementation of switch based filament runout/insert sensor 
This implementation includes a BaseSensor class that all underlying sensor implementations should subclass.

Signed-off-by:  Eric Callahan <arksine.code@gmail.com>
 2019-03-01 00:45:51 -05:00
Arksine 3cd1f9676d pause_resume: Implement send_pause_command() 
This allows for pausing from inside a reactor callback.

Signed-off-by:  Eric Callahan <arksine.code@gmail.com>
 2019-03-01 00:45:51 -05:00
Kevin O'Connor c8d7e28a35 atsamd: Add support for programming SERCOM pins 
Signed-off-by: Florian Heilmann <Florian.Heilmann@gmx.net>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-03-01 00:40:44 -05:00
Kevin O'Connor 8617cbcb76 tmc2130: Wrap code to 80 columns 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-03-01 00:35:20 -05:00
Kevin O'Connor c039b33f2a tmc2130: Add support for INIT_TMC command 
Signed-off-by: Frank Kang <amblidex@outlook.com>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-03-01 00:24:39 -05:00
Kevin O'Connor 5f5d39ef3f bed_screws: Fix missing import 
Reported by @JoaoFelipe.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-28 00:30:05 -05:00
Kevin O'Connor 264505a1b0 tmc2130: Report write-only registers in DUMP_TMC 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-27 18:53:18 -05:00
Kevin O'Connor f7d8fde502 tmc2208: Report write-only registers in DUMP_TMC 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-27 18:49:45 -05:00
Kevin O'Connor 1b064b5a5d tmc2660: Wrap code to 80 columns 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-27 14:33:17 -05:00
Kevin O'Connor c1670ea336 tsl1401cl_filament_width_sensor: Wrap code to 80 columns 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-27 14:33:17 -05:00
Kevin O'Connor 20040f4a18 quad_gantry_level: Wrap code to 80 columns 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-27 14:33:17 -05:00
Kevin O'Connor a4a23dee9f respond: Wrap code to 80 columns 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-27 14:33:17 -05:00
Kevin O'Connor 0b095ddf47 temperature_fan: Wrap code to 80 columns 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-27 14:33:17 -05:00
Kevin O'Connor f13c5d4cdb sx1509: Wrap code to 80 columns 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-27 14:33:17 -05:00
Kevin O'Connor adc4af2fc4 serialqueue: Wrap code to 80 columns 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-27 14:20:15 -05:00
Kevin O'Connor e4d52a19b8 stepcompress: Wrap code to 80 columns 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-27 14:20:15 -05:00
Kevin O'Connor 2d99a1e802 buttons: Wrap code to 80 columns 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-27 13:34:22 -05:00
Kevin O'Connor ef1bf60ab7 hd44780: Wrap code to 80 columns 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-27 13:31:47 -05:00
Kevin O'Connor 51051478af st7920: Wrap code to 80 columns 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-27 13:31:31 -05:00
Kevin O'Connor d6d23c8415 thermistor: Wrap code to 80 columns 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-27 13:29:41 -05:00
Kevin O'Connor 9f1d9bf0f4 probe: Wrap code to 80 columns 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-27 13:28:55 -05:00
Kevin O'Connor ea1814e017 Wrap code to 80 columns 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-27 13:27:52 -05:00
Kevin O'Connor e504147285 font8x14: Store font as strings instead of as bytearray 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-27 13:26:59 -05:00
Kevin O'Connor af882ee0fe chelper: Wrap code to 80 columns 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-27 13:20:57 -05:00
Kevin O'Connor 9d8c7ddc1e pins: Wrap code to 80 columns 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-27 13:19:42 -05:00
Kevin O'Connor 9be6cf226b klippy: Wrap code to 80 columns 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-27 13:18:43 -05:00
Kevin O'Connor 21e45cac64 spi_temperature: Wrap code to 80 columns 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-27 13:14:23 -05:00
Kevin O'Connor ee1236805e toolhead: Wrap code to 80 columns 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-27 13:11:12 -05:00
Kevin O'Connor b934313c3d heater: Wrap code to 80 columns 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-27 13:09:24 -05:00
Kevin O'Connor d7e8264d92 extruder: Wrap code to 80 columns 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-27 13:07:41 -05:00
Kevin O'Connor 118b7593a6 msgproto: Wrap code to 80 columns 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-27 13:06:15 -05:00
Kevin O'Connor 45203070ed util: Wrap code to 80 columns 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-27 13:05:37 -05:00
Kevin O'Connor e7eb745d99 mathutil: Wrap code to 80 columns 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-27 13:04:56 -05:00
Kevin O'Connor 5bbae0710a gcode: Wrap code to 80 columns 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-27 13:04:19 -05:00
Kevin O'Connor 65d6253fb8 clocksync: Wrap code to 80 columns 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-27 13:01:52 -05:00
Kevin O'Connor e5e079faf2 console: Wrap code to 80 columns 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-27 13:00:30 -05:00
Kevin O'Connor dddfb681c7 pins: Add support for pull down resistors 
Add initial support for selecting pull down resistors (for
micro-controllers that support it).

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-27 11:13:21 -05:00
Douglas Hammond b6589406d4 temperature_sensor: Add generic temperature sensor support 
Signed-off-by: Douglas Hammond <wizhippo@gmail.com>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-26 13:15:56 -05:00
Douglas Hammond f9968904d6 temperature_fan: Remove stats as it now supports gcode reports 
Signed-off-by: Douglas Hammond <wizhippo@gmail.com>
 2019-02-26 12:07:00 -05:00
Douglas Hammond 3887ad4fce heater: Support generic gcode_id registration for sensors 
Support reading a "gcode_id" parameter from heater/sensor config
sections.

Signed-off-by: Douglas Hammond <wizhippo@gmail.com>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-26 12:07:00 -05:00
Kevin O'Connor 34209e6189 heater_bed: Wrap lines to 80 columns 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-26 11:20:01 -05:00
Kevin O'Connor adf6040e9e gcode: Use an event to handle restart request actions 
Instead of directly turning off motors, heaters, and fans from
gcode.py, raise a new event and allow the heater, fan, and toolhead to
handle the event as needed.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-25 21:26:27 -05:00
Kevin O'Connor ff9605c082 gcode: The set_temp() takes an extruder number not a heater id 
Commit cf6c5e6f did not fix the shared heater case - a set_temp()
request takes the extruder id, not the heater id (nor the gcode sensor
id).

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-25 21:04:02 -05:00
Kevin O'Connor c54c81dc2a heater: Return heaters with a gcode_id from new get_gcode_sensors() 
The gcode.py code should not peek into the heater classes to obtain
the gcode_id.  Instead, introduce a new get_gcode_sensors() so that
the gcode.py code does not need to.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-25 20:34:26 -05:00
Kevin O'Connor bb4fab5570 heater: Rename add_sensor() to add_sensor_factory() 
Signed-off-by: Douglas Hammond <wizhippo@gmail.com>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-25 20:34:12 -05:00
Kevin O'Connor cf6c5e6f18 gcode: A set temperature request should use the heater name, not the gcode id 
When setting a temperature, lookup the heater via
self.heaters.lookup_heater() and do not use the gcode ids.  This fixes
temperature setting when multiple extruders share the same heater.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-25 20:32:30 -05:00
Kevin O'Connor 13b2e091b8 gcode: Rename self.heater to self.heaters 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-25 20:04:05 -05:00