3diy
/
klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
2,612 Commits 1 Branch 0 Tags 27 MiB
Commit Graph

444 Commits

Author SHA1 Message Date
Kevin O'Connor 28aa2f507a endstop: Rename mcu end_stop commands to endstop 
Rename the commands.

The main reason for this change is to force a micro-controller code
updated (due to important bugfix in 7fefe52d).

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-07-12 08:10:53 -04:00
Kevin O'Connor 0343d0c73a firmware_retract: Remove z_hop support 
The current z_hop support did not work correctly with common slicers
that change Z height between retract and unretract, and it did not
work correctly with slicers that issue a retract at the end of a print
and then at the beginning of the next print.

The z_hop support is therefore being removed until these issues can be
fixed.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-07-10 19:25:56 -04:00
Kevin O'Connor 364c22fe84 probe: Rework the PROBE_ACCURACY command parameters 
Don't default to a Z location of 10, as that could cause damage if the
probe's z_offset is greater than 10.  Instead, use the "retract
distance" method that is used for normal multi-sample probing.

Update the PROBE_ACCURACY command parameter names to use the same
parameter names as the PROBE command.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-07-10 15:21:09 -04:00
Arksine d4d8bf795b filament_switch_sensor: add SET_FILAMENT_SENSOR gcode 
Signed-off-by:  Eric Callahan <arksine.code@gmail.com>
 2019-07-10 09:57:46 -04:00
Kevin O'Connor ea6f30bd99 docs: Update Protocol.md to use enumerations for pins 
Now that pins use enumerations, update the set_digital_out command
examples.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-07-09 14:17:28 -04:00
Kevin O'Connor e7dd313a96 docs: Add information on using OpenOCD to Bootloaders.md 
Add information on using OpenOCD.  Add information on flashing the
SAMD21 and SAMD51 with OpenOCD.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-07-09 13:37:17 -04:00
Arksine e19a41d0dd docs: Add documentation for [delayed_gcode] 
Signed-off-by:  Eric Callahan <arksine.code@gmail.com>
 2019-07-01 11:09:30 -04:00
Arksine 57eb0e8975 docs: Update for latest changs to skew_correction 
Signed-off-by:  Eric Callahan <arksine.code@gmail.com>
 2019-06-29 10:58:46 -04:00
Arksine 3a3dfd51b9 docs: Add CLEAR_PAUSE to G-Codes.md 
Signed-off-by:  Eric Callahan <arksine.code@gmail.com>
 2019-06-28 12:44:49 -04:00
Kevin O'Connor d9d94c858a docs: Add skew_correction.md to Overview.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-06-27 09:50:17 -04:00
Arksine a3b4543c97 skew_correction: add documentation 
Signed-Off-By:  Eric Callahan <arksine.code@gmail.com>
 2019-06-26 20:16:35 -04:00
Kevin O'Connor d9bddc35a1 docs: Add information on running the regression suite locally 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-06-23 17:59:23 -04:00
Kevin O'Connor a2c7fd369c docs: Note tmc2209 and tmc5160 support in Features.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-06-23 12:28:39 -04:00
Kevin O'Connor ba27e0aa02 docs: Warn against using "PreloadVE" on KISSlicer 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-06-23 12:18:24 -04:00
Kevin O'Connor 83e6c01ada probe: Allow probe parameters to be specified as g-code parameters 
Add PROBE_SPEED, SAMPLES, SAMPLE_RETRACT_DIST, SAMPLES_TOLERANCE,
SAMPLES_TOLERANCE_RETRIES, and SAMPLES_RESULT parameters to the PROBE
command (and to commands that indirectly invoke a probe).

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-06-21 14:44:28 -04:00
Kevin O'Connor 8cce3cc8e7 graphstats: Add support for interactive graphs 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-06-19 21:12:26 -04:00
Kevin O'Connor 8b00580884 gcode_macro: Parse variable_X parameters using ast.literal_eval() 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-06-07 19:33:31 -04:00
Kevin O'Connor a541c2f60e docs: Update Config_Changes.md with "samples" move to probe config section 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-06-06 10:15:47 -04:00
Kevin O'Connor 97adca18c4 docs: Update Delta_Calibrate.md with probe location bias info 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-06-06 10:08:58 -04:00
Kevin O'Connor e061029b3a docs: Update Probe_Calibrate.md with information on common probe errors 
Add a section describing PROBE_ACCURACY, describing probe location
bias, and describing probe temperature bias.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-06-06 10:08:58 -04:00
Len Trigg 5989f7a8a6 firmware_retraction: Implementation of tuneable G10/G11 firmware retraction (#1617) 
This supports getting and setting of retraction parameters without
having to restart klippy.

Signed-off-by: Len Trigg <lenbok@gmail.com>
 2019-06-06 09:10:09 -04:00
Kevin O'Connor 3f96c0abd8 docs: Minor wording change to Command_Templates.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-06-04 10:39:43 -04:00
Kevin O'Connor 962c48ecf7 docs: Fix github pages "liquid" rendering of Command_Templates.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-06-04 10:31:03 -04:00
Kevin O'Connor 94c1ad7241 docs: Add an initial Command_Templates.md document 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-06-04 09:50:30 -04:00
Kevin O'Connor a68f577adf gcode_macro: Add support for SET_GCODE_VARIABLE command 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-06-04 09:50:30 -04:00
Kevin O'Connor ac8f6dfe20 gcode_macro: Rename "status" helper to "printer" 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-06-04 09:50:30 -04:00
Arksine a238ec6f98 idle_timeout: Add SET_IDLE_TIMEOUT gcode 
Signed-off-by:  Eric Callahan <arksine.code@gmail.com>
 2019-06-04 09:46:26 -04:00
Kevin O'Connor c54b8da530 gcode: Add support for SAVE_GCODE_STATE and RESTORE_GCODE_STATE commands 
Add commands to save and restore the current g-code state.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-05-31 10:23:56 -04:00
Kevin O'Connor d6b69938ab gcode: Don't apply the SET_GCODE_OFFSET to the next g-code command 
The SET_GCODE_OFFSET command could cause unwanted behavior when an
offset is applied to the following g-code command.  (In particular,
when the following command is an extrude only move - as in
issue #1289.)

Don't apply the offset immediately.  Instead, add support for a MOVE=1
parameter which will schedule a move to apply the given offset.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-05-26 11:19:15 -04:00
Kevin O'Connor 500f37821d docs: Improve bltouch v3 documentation 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-05-26 11:09:32 -04:00
Kevin O'Connor c77285287b docs: Try to be more clear that the "paper test" steps need to be run 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-05-24 22:44:00 -04:00
Kevin O'Connor 6c4c26c319 docs: Minor wording change to Bed_Level.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-05-23 19:31:44 -04:00
Kevin O'Connor 1856f95503 docs: Recommend OctoPrint 1.3.11 or later 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-05-20 23:01:04 -04:00
Kevin O'Connor ad12ffa981 docs: Use markdown syntax for http links in Bootloaders.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-05-20 17:19:33 -04:00
Kevin O'Connor fd1dff3f02 docs: Fix numbering in FAQ 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-05-08 16:48:14 -04:00
Kevin O'Connor 73fd292637 docs: Update "avr restart=command" FAQ to point to bootloaders.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-05-07 23:02:20 -04:00
Kevin O'Connor 8524602b6e docs: Fix inclusion of CONTRIBUTING.md in the automatic html generation 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-04-18 23:10:32 -04:00
Kevin O'Connor 17dd6e5097 docs: Fix markdown table layout in html rendering 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-04-18 22:56:56 -04:00
Kevin O'Connor b5f79d5e77 docs: Simplify main html page now that there is a logo 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-04-18 22:37:56 -04:00
Kevin O'Connor 57cf0759c0 docs: Add logos to web page 
Also, move docs/index.md to docs/_layouts/home.html.  Add a
docs/_layouts/README file.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-04-18 22:35:35 -04:00
Kevin O'Connor 85c01d4b6a docs: Minor node changes to klipper logo 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-04-18 11:42:40 -04:00
Kevin O'Connor 49b18a6be7 docs: Update logo so that edges overlap 
Overlapping edges reduce the effects of anti-aliasing.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-04-18 11:31:29 -04:00
Kevin O'Connor 9b960e63fb docs: Add a Klipper logo 
Signed-off-by: Jonne Kuusela <johnedwa@gmail.com>
Signed-off-by: Michael J Shephard <michael.j.shephard@gmail.com>
Signed-off-by: Thomas Herrmann <therrmann23@gmail.com>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-04-18 11:31:29 -04:00
Kevin O'Connor 6f34ba59cb docs: Add an index page for the www.klipper3d.org website 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-04-16 22:00:35 -04:00
Kevin O'Connor 4739e28137 docs: Add a github pages html template 
Add an html template so that each page has a navbar at the top and a
sidebar on the left with an auto-generated table of contents.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-04-16 20:55:41 -04:00
Kevin O'Connor 64e7235e48 docs: Rewrite the Overview.md - just list documents by category 
Replace the Overview.md document description with a list of documents
and a brief description of their contents.  The goal is to make it
easier for users to find information.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-04-16 20:45:00 -04:00
Kevin O'Connor cb04e4c45d docs: Fix alignment of tmc2208.svg 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-04-16 11:34:45 -04:00
Kevin O'Connor c440c6b7aa docs: Start of google pages _config.yml file 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-04-15 11:04:23 -04:00
Kevin O'Connor e3df39245f docs: Fixup github pages 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-04-14 22:41:23 -04:00
KevinOConnor 8a6d415745 Update CNAME 2019-04-14 21:25:54 -04:00
KevinOConnor b90a04a5cf Create CNAME 2019-04-14 21:21:14 -04:00
KevinOConnor 63f8d8cc79 Set theme jekyll-theme-leap-day 2019-04-14 21:17:52 -04:00
Kevin O'Connor 8bc9f39c58 docs: Avoid using .. in markdown links 
Using .. in the markdown link can confuse some document processors.
Use an absolute link to github instead.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-04-14 21:12:21 -04:00
Kevin O'Connor 04adde9a02 docs: Update Installation.md to point to list of supported ARM mcus 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-04-06 18:47:02 -04:00
Kevin O'Connor de124677b0 docs: Update BLTouch.md to refer to Probe_Calibrate.md for offset config 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-04-05 18:22:57 -04:00
Kevin O'Connor 9f9262cba8 docs: Minor wording changes to BLTouch.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-04-05 18:20:21 -04:00
Kevin O'Connor 54a2c5d58e BLTouch: Use G90 in the BLTouch.md homing_override example 
Reported by @sgtnoodle.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-04-05 17:49:58 -04:00
Kevin O'Connor a5a6ae83ff docs: Wrap BLTouch.md to 80 columns. 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-04-05 17:48:51 -04:00
Kevin O'Connor 6318bdc99b docs: Note the python software dependency update in Config_Changes.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-04-05 11:20:36 -04:00
Kevin O'Connor 0615ab5f89 docs: Note the use of bus enumerations in Config_Changes.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-04-04 18:30:04 -04:00
Kevin O'Connor be6b29fabf sx1509: Convert code to use generic i2c bus support 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-04-04 18:29:30 -04:00
Kevin O'Connor 9bd3e80421 docs: Note that graphstats.py can produce different types of graphs 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-04-01 22:24:45 -04:00
Kevin O'Connor 2980c2e12c docs: Minor wording change in MCU_Commands.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-04-01 22:04:56 -04:00
Kevin O'Connor c30a6f2e6b docs: Update Protocol documentation with enumerations 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-04-01 21:41:33 -04:00
Eugene Krashtan b35e07ca2b docs: STM32F0 benchmarks (#1462) 
Signed-off-by: Eugene Krashtan <eug.krashtan@gmail.com>
 2019-03-29 09:38:54 -04:00
Douglas Hammond c105adc80b temperature_fan: Fix. Temperature fan min speed should be used (#1405) 
Signed-off-by: Douglas Hammond <wizhippo@gmail.com>
 2019-03-28 14:07:40 -04:00
Eugene Krashtan c7330e07a4 stm32f0: Various fixes according to comment: (#1453) 
* Copyright in log.c
* GPIO check completely removed
* generic/timer_irq added
* Change in doc section

Signed-off-by: Eugene Krashtan <eug.krashtan@gmail.com>
 2019-03-28 10:21:51 -04:00
Kevin O'Connor 312cabc3f7 docs: Move benchmark information from Debugging.md to new Benchmarks.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-03-28 09:52:06 -04:00
Kevin O'Connor de7444ca69 docs: Remove spurious executable flag from documents 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-03-24 12:17:12 -04:00
Eugene Krashtan b79db3e3d6 docs: Documentation draft for STM32F0 
Signed-off-by: Eugene Krashtan <Eugene.Krashtan@opensynergy.com>
 2019-03-24 12:10:11 -04:00
Kevin O'Connor 9aadc3c7fa docs: Also note that driver_VSENSE was removed from tmc2660 driver 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-03-22 22:40:42 -04:00
Kevin O'Connor efab177645 docs: Note tmc2660 driver_HEND default change from 6 to 3 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-03-22 20:41:32 -04:00
amblidex 0980b7e4ec tmc2130: add SET_TMC_CURRENT and SET_TMC_FIELD commands (#1419) 
Signed-off-by: Frank Kang <amblidex@outlook.com>
 2019-03-22 20:37:03 -04:00
Frank Kang 06c0463d44 Update sensorless homing documentation to disable second home 
Signed-off-by: Frank Kang <amblidex@outlook.com>
 2019-03-19 10:55:59 -04:00
Kevin O'Connor b28e95ca1a command: Always pass a string to the DECL_CONSTANT() macro 
Make it clear that the name of the constant being defined is a string.
When the value being defined is also a string, use a new
DECL_CONSTANT_STR() macro.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-03-17 19:38:18 -04:00
Kevin O'Connor 12f6513ba2 docs: Recommend OctoPi v0.16.0 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-03-11 22:13:04 -04:00
Kevin O'Connor 96c4e1c5a0 docs: Update atsam usb transfer benchmarks 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-03-10 21:59:18 -04:00
Kevin O'Connor d3f6dad853 controller_fan: Allow multiple controller_fan sections to be defined 
It may be necessary to define multiple fans, so allow each config
section to be named.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-03-10 13:57:01 -04:00
Rui Caridade 5c0a2479be screws_tilt_adjust: Add new screws_tilt_adjust tool (#1367) 
Signed-off-by: Rui Caridade <rui.mcbc@gmail.com>
 2019-03-08 11:47:17 -05:00
Kevin O'Connor 563bc37073 tmc2130: Rename driver_BLANK_TIME_SELECT to driver_TBL 
Use the field names from the trinamic specification.  This makes the
field similar to all the other driver_XXX config options.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-03-08 11:25:19 -05:00
Kevin O'Connor 89935c6831 docs: Update Config_Changes.md with tmc2660 changes 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-03-08 11:08:24 -05:00
Florian Heilmann 789379e95b tmc2660: Add INIT_TMC and SET_TMC_FIELD gcodes 
Signed-off-by: Florian Heilmann <Florian.Heilmann@gmx.net>
 2019-03-08 11:04:14 -05:00
Kevin O'Connor d62a41b930 manual_stepper: Add support for moves with acceleration 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-03-03 13:38:10 -05:00
Arksine 69491e2dab filament_switch_sensor: update documentation 
Signed-off-by:  Eric Callahan <arksine.code@gmail.com>
 2019-03-01 00:45:51 -05:00
Kevin O'Connor c8d7e28a35 atsamd: Add support for programming SERCOM pins 
Signed-off-by: Florian Heilmann <Florian.Heilmann@gmx.net>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-03-01 00:40:44 -05:00
Kevin O'Connor c039b33f2a tmc2130: Add support for INIT_TMC command 
Signed-off-by: Frank Kang <amblidex@outlook.com>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-03-01 00:24:39 -05:00
Kevin O'Connor b40a04fb8d docs: Update Installation document to emphasize the "stay connected" step 
Move the OctoPrint "stay connected" during error configuration step to
its own paragraph. Hopefully this will make it less likely that users
skip this step.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-27 20:03:44 -05:00
Kevin O'Connor 88ebedcc63 docs: Update Installation document to suggest using /dev/serial/by-id/ 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-27 19:58:09 -05:00
Arksine f7d8854587 bed_mesh: simplify configuration 
The 'bed_shape' option has been removed.  The user will enter a 'bed_radius' if they have a round be, otherwise they should enter 'min_point' and 'max_point'.  When the bed is round the user should supply a 'round_probe_count' option, otherwise just 'probe_count'.

Signed-off-by: Eric Callahan <arksine.code@gmail.com>
 2019-02-25 13:34:14 -05:00
Kevin O'Connor 31987c7bcd docs: Add a Manual_Probe.md document 
Add information on calibrating the bed on traditional printers with a
Z endstop and bed screws.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-24 00:49:47 -05:00
Kevin O'Connor 80c8bd8b4d bed_screws: Add a helper tool for leveling bed screws 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-24 00:49:47 -05:00
Kevin O'Connor 328bd89fc1 docs: Warn against using the TMC2208 in standalone mode 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-20 16:22:06 -05:00
Rui Caridade 276d5a1436 probe: Add PROBE_ACCURACY command 
Implementation of "PROBE_ACCURACY" to measure the maximum, minimum,
average and standard deviation of a probe.

Signed-off-by: Rui Caridade <rui.mcbc@gmail.com>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-18 00:36:28 -05:00
christian mock 82efed5e2a docs: added an answer to the FAQ about detecting lost steps (#1265) 
Signed-off-by: christian mock <cm@tahina.priv.at>
 2019-02-17 22:35:58 -05:00
Kevin O'Connor cc4ecef88b mcp4018: Add initial support for the mcp4018 digipot 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-16 08:16:37 -05:00
nopbit 0f674ef407 tsl1401cl_filament_width_sensor: Filament Width Sensor Support (#1132) 
Support added for filament diameter sensor. Sample configuration parameters added to example-extras.cfg.

Signed-off-by: Mustafa YILDIZ <mydiz@hotmail.com>
 2019-02-14 10:13:48 -05:00
KevinOConnor c6d1d1bd8c
Merge pull request #1242 from john--/pr_generic_heater 
Generic Heater Support
 2019-02-14 10:08:26 -05:00
Kevin O'Connor dd303ec4a9 docs: Try to make manual vs automatic probing more clear in DELTA_CALIBRATE 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-13 23:20:34 -05:00
John Jardine 6316b2c1b6 Generic Heater Support 
Adds the ability to register a custom/generic heater through a new extra called heater_generic.
This takes a gcode_id that is reported by M105. Adds a new command to set the temperature for any heater using the syntax:
SET_HEATER_TEMPERATURE HEATER=<heater_name> TARGET=<target_temp>

Signed-off-by: John Jardine <john@gprime.net>
 2019-02-14 01:15:11 +00:00
Kevin O'Connor 5aa4fd2b4a docs: Note MCP4728 in Features.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-12 18:39:12 -05:00