3diy
/
klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
3,177 Commits 1 Branch 0 Tags 27 MiB
Commit Graph

571 Commits

Author SHA1 Message Date
Tonny Møller 8a69e5d596
config: add sample-bigtreetech-exp-mot.cfg (#3135) 
Signed-off-by: Tonny Møller <tonn0297@gmail.com>
 2020-08-06 14:19:37 -04:00
Kevin O'Connor 68e9a495dd config: Minor updates to printer-creality-ender3-v2-2020.cfg 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-08-02 16:27:31 -04:00
Jimmacle 6030551075
config: Add example configuration for Creality Ender 3 V2 (#3144) 
Includes special serial configuration and flashing instructions for the
Creality V4.2.2 board.

Signed-off-by: John Gross <jmgross@jmgross.dev>
 2020-08-01 20:20:48 -04:00
Voron 9213646c63
corexz: Add CoreXZ kinematics (#3129) 
Add a CoreXZ kinematics

Signed-off-by: Maks Zolin <mzolin@vorondesign.com>
 2020-07-30 12:42:23 -04:00
Kevin O'Connor 8ecec4be8e config: Consolidate description of heater parameters in example.cfg 
Describe max_delta in [heater] instead of in [heater_bed].

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-07-25 11:56:21 -04:00
Kevin O'Connor db05938a5f servo: Set initial value via mcu_servo.setup_start_value() 
Using the setup_start_value() method avoids the PWM output line
transitioning to an intermediate state prior to setting the initial
value.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-07-25 11:39:39 -04:00
Kevin O'Connor 428a8d4881 servo: Remove servo ENABLE parameter 
Allow one to disable servos via `SET_SERVO WIDTH=0` instead of using
an explicit ENABLE parameter.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-07-25 11:39:39 -04:00
combolek 3835654116
lm75: Added support for LM75/LM75A I2C connected temperature sensors (#3101) 
Signed-off-by: Boleslaw Ciesielski <combolek@users.noreply.github.com>
 2020-07-19 20:18:54 -04:00
Iakabos b0901daa85
display: Add configuration options for OLED displays (#3084) 
Add user-configurable contrast, vcomh (affects "smearing"), and invert options for SSD1306/SH1106 type OLED displays.

Signed-off-by:  James Esau <james_esau@hotmail.com>
 2020-07-19 20:18:08 -04:00
Kevin O'Connor 0f24406acc config: Fix printer-creality-ender5-2019.cfg positions flipped 
The X and Y axes were flipped.  Reported by @njilk.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-07-19 19:46:29 -04:00
Kevin O'Connor 1c508c38aa config: Minor formatting change to example.cfg 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-07-16 13:04:00 -04:00
Kevin O'Connor af981432f0 thermistor: Add in definition for "SliceEngineering 450" thermistor 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-07-11 12:50:58 -04:00
Paul Greidanus 65ade083b2
config: Fix for SKR Mini-e3 v2.0 UART addresses (#3059) 
Y and Z were flipped as per: https://github.com/bigtreetech/BIGTREETECH-SKR-mini-E3/blob/master/firmware/V2.0/Marlin-2.0.x-SKR-mini-E3-V2.0/Marlin/Configuration_adv.h#L2204-L2212

thanks to Vael#9090 on Discord for pointing this out

Signed-off-by: Paul Greidanus <paul@majestik.org>
 2020-07-06 11:40:45 -04:00
Dmitry Butyugin 4bdc11a8b3
input_shaper: Initial support of input shaping (#3032) 
Input shaping can help to reduce printer vibrations due to resonances
and eliminate or reduce ghosting in prints.

Signed-off-by: Dmitry Butyugin <dmbutyugin@google.com>
 2020-07-05 20:54:38 -04:00
James 7bc6470082
config: Added some sample glyphs for 128x64 screens (#3028) 
A selection of sample glyphs for use on 128x64 displays.

Signed-off-by: James Wood <james@james-wood.com.au>
 2020-07-02 07:37:59 -04:00
Kevin O'Connor 541665679e config: Add printer-creality-ender5plus-2019.cfg example config 
Reported by @mihaiserban.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-06-25 12:45:47 -04:00
Kianusch Sayah Karadji 2ae6c220e3 config: Example configuration for MKS Robin E3D/E3 
Signed-off-by: Kianusch Sayah Karadji <kianusch@gmail.com>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-06-25 12:37:10 -04:00
Kevin O'Connor 755064177b config: Add pin hints for probe header in generic-duet2-maestro.cfg 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-06-17 13:23:53 -04:00
Denis Ignatenko b3298d8992
hall_filament_width_sensor: Added width logging (#2981) 
Signed-off-by: Denis Ignatenko deniss979@gmail.com
 2020-06-16 13:36:49 -04:00
Kevin O'Connor d47a5eb8b6 config: Update generic-bigtreetech-skr-v1.4.cfg with diag1 pins 
Reported by @Tomblarom.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-06-15 16:48:08 -04:00
Lucio Tarantino 35bbd989e4
docs: LinuxMCU doc & script (#2956) 
Signed-off-by: Lucio Tarantino <lucio.tarantino@gmail.com>
 2020-06-12 20:32:12 -04:00
Kevin O'Connor c630ecf3c7 config: Mention 0/1 is valid for display_glyph data 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-06-09 09:05:41 -04:00
Kevin O'Connor 7713986ae1 display: Make hd44780 glyphs configurable 
Allow the 20x4 hd44780 screen glyphs to be customizable from the
config file.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-06-09 08:09:59 -04:00
Kevin O'Connor 1a7e4e51b3 display: Use '.' and '*' in display_glyph description 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-06-08 21:40:42 -04:00
Florian Heilmann 3dcac1308e display: Move glyph definition to printer config 
This commit allows to modify the icons (or glyphs) in the displays that
support it. Existing icons can be modified and new icons can be added via
a [display_glyph] section in the config.

Signed-off-by: Florian Heilmann <Florian.Heilmann@gmx.net>
 2020-06-08 16:40:45 -04:00
matpab 967fe1c01c
HallFilamentWidthSensor: Use current width instead of nomal width while delay is not over (#2907) 
Option for using the current diameter instead of nominal while the first measurement isn't in place

Signed-off-by: Matthias Pabel <matthias.pabel@hs-augsburg.de>
 2020-06-06 14:19:00 -04:00
Kevin O'Connor 2da7d65402 config: Add example config printer-makergear-m2-2016.cfg 
Reported by @N5QM.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-06-04 12:01:30 -04:00
Kevin O'Connor c890aba45e config: Fix uart addresses on generic-bigtreetech-skr-mini-e3-v1.0.cfg 
Reported by @Jumbu.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-06-04 11:50:50 -04:00
Kevin O'Connor 3a3ea90ba5 config: Fixes for generic-bigtreetech-skr-mini-e3-v2.0.cfg 
Add config file to printers.test.  Fix errors in config and unify
settings with the mini-e3-v1.2 config.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-06-04 11:46:57 -04:00
Paul Greidanus 4b650eccb2
config: Config example for a SKR Mini E3 v2.0 (#2929) 
This is a basic config example for a SKR Mini E3 v2.0, the pinouts are different than the 1.2 and requires different compile options, so worth having an example.

Signed-off-by: Paul Greidanus <paul@majestik.org>
 2020-06-04 11:38:52 -04:00
Kevin O'Connor 686d557863 tmc5160: Change the default for the pwm_freq field to zero 
The tmc5160 spec shows a default of zero, so use that same default for
Klipper.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-05-24 23:58:48 -04:00
Adrian Keet b267178370 controller_fan: Add fan_speed parameter. 
This gives it parity with heater_fan.  Also change the default speed from
max_power to 1.0, since it is already scaled by max_power in set_speed.

Signed-off-by: Adrian Keet <arkeet@gmail.com>
 2020-05-24 11:46:46 -04:00
Kevin O'Connor f0c394de81 docs: Add stow_on_each_sample description to BL-Touch.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-05-11 12:46:25 -04:00
Kevin O'Connor eebd7e6579 docs: Update bltouch probe_with_touch_mode documentation 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-05-11 12:46:25 -04:00
Kevin O'Connor 20a27c697f bltouch: Add "probe in touch mode" option 
Signed-off-by: Mike Stiemke <fandjango@gmx.de>
 2020-05-11 12:46:25 -04:00
Kevin O'Connor 703490da1c bltouch: Simplify handling of command timing 
Always disable the PWM after each command sent.  Automatically trim
the command duration so the PWM disable doesn't increase the total
pulse time (when the duration is 200ms or greater).

Track the ideal command end time separately from the pwm transmit time
and only delay toolhead moves to this ideal time.

Update verify_state() to automatically schedule the check using the
time of the last sent command.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-05-11 12:46:25 -04:00
Kevin O'Connor c3b973319f config: Add printer-anet-e16-2019.cfg example config file 
Reported by @dstack.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-05-11 12:34:58 -04:00
Lucio Tarantino dac42efbd9
htu21d: Support for HTI21D family sensor on I2C bus (#2803) 
Signed-off-by: Lucio Tarantino <lucio.tarantino@gmail.com>
 2020-05-03 18:47:24 -04:00
Hywelmartin 07e8011f51
config: Update printer-anycubic-kossel-plus-2017.cfg (#2775) 
horizontal_move_z: 20 instead of 5... there has been some support Q about this..

Signed-off-by: Martin Malmqvist <hywelmartin@gmail.com>
 2020-05-02 09:31:23 -04:00
Kevin O'Connor 1460e0d6f4 config: Add printer-sovol-sv01-2020.cfg example config 
Reported by @lalek54.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-04-29 21:13:11 -04:00
camatthew88 81e71ce8f8
config: Create printer-tronxy-p802m-2020.cfg (#2796) 
Signed-off-by: Matthew Blankenbehler <thecoolkids322@gmail.com>
 2020-04-29 20:45:19 -04:00
Kevin O'Connor 86a99cf38e gcode_button: Simplify script execution 
It's no longer necessary to queue gcode scripts - gcode.run_script()
now does that automatically.

Also, make release_gcode config optional.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-04-25 12:11:49 -04:00
Kevin O'Connor ff28f33967 gcode_arcs: Simplify parameter parsing 
Use the normal gcode.get_float() mechanism for extracting parameters
from the g-code command.

Don't register descriptions for the G2/G3 commands as the convention
is to only use descriptions for "extended g-code commands".

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-04-22 16:19:15 -04:00
Kevin O'Connor 0b05a38361 config: Add tmc2130 example to generic-bigtreetech-skr-v1.4.cfg 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-04-20 22:19:42 -04:00
Kevin O'Connor 57be62b1ca config: Remove obsolete description of menu_root in example-extras.cfg 
Reported by @ld3300.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-04-19 14:01:20 -04:00
Kevin O'Connor c7d6d81a4d test: Fix printer-tronxy-p802e-2020.cfg and add to printers.test 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-04-14 22:19:08 -04:00
camatthew88 f7d7df0b46
config: Create printer-tronxy-p802e (#2674) 
Signed-off-by: Matthew Blankenbehler <mablankenbehler23@whitnall.com>
 2020-04-14 22:14:07 -04:00
Kevin O'Connor 03fb7961b4 config: Use restart_method=cheetah in generic-fysetc-cheetah-v1.1.cfg 
Reported by @csutcliff.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-04-08 12:27:01 -04:00
Kevin O'Connor 4ea7b213e2 config: Change uart addresses in generic-fysetc-cheetah-v1.1.cfg 
Reported by @mihero and @Magoo0876.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-04-08 12:24:32 -04:00
Avery Todd 1758f53b9d
config: Add Ultimaker UltiMainboard v2 config. (#2696) 
Adds config for the Ultimaker 2's UltiMainboard v2 board, with the 
correct pins assigned and current control for the A4988 motor
drivers.

Signed-off-by: Avery Todd <averyct@pm.me>
 2020-04-08 11:26:39 -04:00