Commit Graph

27 Commits

Author SHA1 Message Date
Kevin O'Connor c179db3d43 temperature_sensors: Deprecate "NTC 100K beta 3950" thermistor
It seems the common "beta 3950" thermistors generally follow a
temperature table defined by the new "Generic 3950" definition.  Using
a table that actually follows the "beta 3950" temperature curve is
generally less accurate.  Deprecate the existing "NTC 100K beta 3950"
definition to avoid this common issue.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-11-10 18:56:51 -05:00
Kevin O'Connor 596cd21751 temperature_sensors: Define default sensors in new config file
Move the default list of sensor modules from heaters.py to a new
temperature_sensors.cfg config file.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-11-10 18:52:55 -05:00
Kevin O'Connor 8bfcedfb42 heaters: Remove support for deprecated pid_integral_max option
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-11-02 12:45:11 -04:00
Eric Callahan e65b2593c6 heaters: round reported temps to 2 decimal places
Signed-off-by:  Eric Callahan <arksine.code@gmail.com>
2021-10-15 18:01:19 -04:00
Kevin O'Connor 46167cae67 configfile: Add support for reporting deprecated options
Add a new printer.configfile.warnings with a list of config features
that are deprecated.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-09-16 13:44:54 -04:00
Kevin O'Connor c84956befe heaters: Change default smooth_time from 2 seconds to 1 second
A larger smooth_time results in a slower reaction time for the PID.
This increased delay can cause temperature oscillations with high
power heaters.  Many boards produce good results without any
smoothing.  So, it seems a smooth_time of 1 second is a better
default.

Reported by @ReXT3D.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-09-03 18:11:05 -04:00
Kevin O'Connor 64b3e5642e heaters: Make sure set_temp() command wakes up the idle_timeout
Introduce a heaters.set_temperature() command and call that from
commands that set a heater temperature.  This new function calls
toolhead.register_lookahead_callback() so that the idle_timeout gets
notification that activity has occurred.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-03-05 18:59:01 -05:00
Evgenii 3d35c003db temperature_host: Rename rpi_temperature and add support for custom paths
Signed-off-by: Evgenii Shavrin <shavrin0591@gmail.com>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-02-19 18:44:28 -05:00
Alan Lord 7d4df65920
ds18b20: new module for 1-wire temperature sensor (#3462)
Initial commit of code to support 1-wire (Dallas) sensors such
as the DS18B20. Requires Linux kernel drivers to create a file
in /sysfs which is read by this module, and temperature
typically returned to a temperature_fan.

Signed-off-by: Alan Lord <alanslists@gmail.com>
Signed-off-by: Josh Headapohl <joshhead@gmail.com>
2021-02-02 14:34:56 -05:00
Kevin O'Connor 023a985bfc gcode_macro: Use deepcopy() on get_status() results
If a get_status() method returns a mutable object (such as a list or
dict) then it would be possible for a gcode command template to
incorrectly alter the program's internal state.  Perform a deepcopy()
operation on all get_status() return results to avoid that.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-01-20 16:25:25 -05:00
Justin Schuh a5ebe5825a
heaters: Make MINIMUM optional for TEMPERATURE_WAIT command (#3674)
Signed-off-by: Justin Schuh <code@justinschuh.com>
2020-12-24 11:34:26 -05:00
Justin Schuh 1a9218532b heaters: Add MAXIMUM option to TEMPERATURE_WAIT command
Signed-off-by: Justin Schuh <code@justinschuh.com>
2020-12-23 18:16:46 -05:00
Kevin O'Connor a637c2f110 heaters: Fix TEMPERATURE_WAIT command with extruder and heater_bed
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-22 15:22:13 -05:00
Kevin O'Connor e786748f18 heaters: Always register heater pin as a pwm pin
There's no need to sometimes register the pin as a 'digital_out' pin
instead of as a 'pwm' pin.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-15 12:21:04 -05:00
Stefan Dej 77add95675
heaters: add last pwm value to heater.get_status (#3621)
Signed-off-by: Stefan Dej <meteyou@gmail.com>
2020-12-13 20:08:16 -05:00
Kevin O'Connor a1baefc2c2 temperature_mcu: Add enhanced support for monitoring mcu temperature
Add a "temperature_mcu" tool that can monitor builtin micro-controller
temperature sensors.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-10 02:39:06 -05:00
Kevin O'Connor e83801daab heaters: Add a TEMPERATURE_WAIT command
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-07 09:57:13 -05:00
Al b911db4c0d
rpi_temperature: New module to monitor RPi temperature (#3587)
Module to monitor RPi cpu temperature

Signed-off-by: Al Crate <aleph@al3ph.org>
2020-12-03 12:35:37 -05:00
Kevin O'Connor e0842e0e03 heaters: Add sensors to printer.heaters.available_sensors even if no gcode_id
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-11-01 20:09:16 -05:00
Kevin O'Connor f8cb1e30eb heaters: Don't raise an error if PID Ki is set to zero
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-10-17 20:48:25 -04:00
Kevin O'Connor 4c14063404 heaters: Disable unused pwm output debugging info
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-09-17 02:06:20 -04:00
combolek 3835654116
lm75: Added support for LM75/LM75A I2C connected temperature sensors (#3101)
Signed-off-by: Boleslaw Ciesielski <combolek@users.noreply.github.com>
2020-07-19 20:18:54 -04:00
Kevin O'Connor 787ed452c2 klippy: Rename try_load_module() to load_object()
Rename try_load_module() so that it uses consistent naming for
"printer objects".  Change the function to raise an error by default
if the specified module does not exist.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-05-08 11:05:14 -04:00
Kevin O'Connor 2d4b520260 gcode: Move "ok" tracking to GCodeCommand class
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-05-05 11:08:12 -04:00
Kevin O'Connor 5fe5e21508 heaters: Use new GCodeCommand wrappers
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-05-05 11:08:11 -04:00
Lucio Tarantino dac42efbd9
htu21d: Support for HTI21D family sensor on I2C bus (#2803)
Signed-off-by: Lucio Tarantino <lucio.tarantino@gmail.com>
2020-05-03 18:47:24 -04:00
Kevin O'Connor 17123889f6 heaters: Make heater.py an "extras" module
The heater logic is an independent module that does not need to be
treated as part of the "core" klipper code.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-04-25 14:26:45 -04:00