3diy
/
klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
4,122 Commits 1 Branch 0 Tags 27 MiB
Commit Graph

135 Commits

Author SHA1 Message Date
github@matthewlloyd.net 830c80a88a tuning_tower: Add STEP_DELTA and STEP_HEIGHT parameters as alternate tuning tower syntax 
Signed-off-by: Matthew Lloyd <github@matthewlloyd.net>
 2021-09-02 12:05:31 -04:00
github@matthewlloyd.net 286cc1becc tuning_tower: Add SKIP parameter 
Signed-off-by: Matthew Lloyd <github@matthewlloyd.net>
 2021-09-02 12:05:31 -04:00
Kevin O'Connor 404b64fd62 adxl345: Change default chip name from "default" to "adxl345" 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-08-30 12:26:36 -04:00
Kevin O'Connor e03e0e9dac adxl345: Move g-code commands to new helper class 
Separate out the G-Code command handlers to a new ADXLCommandHelper()
class.  This helps separate the sensing code from the user interface
code.

Deprecate the RATE parameter of the ACCELEROMETER_MEASURE command.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-08-30 12:25:45 -04:00
shiftingtech 32eb2ee2d1
docs: fixed babystepping patch (#4526) 
Just a quick cleanup to where I flubbed the Z_OFFSET_APPLY_ENDSTOP and  Z_OFFSET_APPLY_PROBE documentation

Signed-off-by: Ben Eastep <shifting@shifting.ca>
 2021-07-27 21:57:18 -04:00
Damien cff61605fb docs : make modifications to all md files to make them compatible with mkdocs 
all markdown files must have a single H1 heading at the top.

Signed-off-by: Damien Martin <damlobster@gmail.com>

Update CNAME
 2021-07-27 13:15:25 -04:00
shiftingtech f949bc882d
probe: add ability to save babystepping (#4404) 
Created two new extended gcodes: Z_OFFSET_APPLY_ENDSTOP, and Z_OFFSET_APPLY_PROBE.
These use the z gcode offset to revise the probe offset, or z endstop position
allowing users to make a frequently used babystepping value permanent without
manual config editing.

Signed-off-by: Ben Eastep <shifting@shifting.ca>
 2021-07-25 20:20:15 -04:00
Dmitry Butyugin 2ef5e03ce4 docs: Updated docs for custom AXIS in TEST_RESONANCES 
Signed-off-by: Dmitry Butyugin <dmbutyugin@google.com>
 2021-07-08 11:00:23 -04:00
Matthew Lloyd c2907c998c
screws_tilt_adjust: Add DIRECTION parameter to SCREWS_TILT_CALCULATE (#4357) 
Signed-off-by: Matthew Lloyd <github@matthewlloyd.net>
 2021-06-22 15:18:05 -04:00
Alex Zellner f7279a037d
docs: add CANCEL_PRINT to docs/G-Codes.md (#4370) 
Signed-off-by: Alex Zellner <alexander.zellner@googlemail.com>
 2021-06-14 13:01:42 -04:00
Eric Callahan b513d085a5 docs: Add documentation for BED_MESH_OFFSET 
Signed-off-by:  Eric Callahan <arksine.code@gmail.com>
 2021-06-08 00:02:35 -04:00
Kevin O'Connor 703418de01 docs: Update G-Codes.md now that SET_VELOCITY_LIMIT can exceed config 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-06-03 14:07:56 -04:00
Paul McGowan c148f17ea3
neopixel: add sync parameter to prevent waking toolhead (#4339) 
neopixel: add sync param to prevent waking toolhead

dotstar: refactor to match neopixel methods and add sync parameter

Signed-off-by: Paul McGowan <mental405@gmail.com>
 2021-06-02 10:51:45 -04:00
Kevin O'Connor 391ebd32c1 docs: Minor updates to sdcard_loop documentation 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-05-26 12:05:49 -04:00
Jason S. McMullan 913649de2e loop_sdcard: Add loopable SD card file sections 
To support continuous belt printing, add nestable repeat
loop support via an `[sdcard_loop]` module.

Supported G-Code:
  - SDCARD_LOOP_BEGIN COUNT=n  ; Loop for N times, or infinitely if N is 0
  - SDCARD_LOOP_END            ; End of loop
  - SDCARD_LOOP_DESIST         ; Complete all loops without iterating

Marlin M808 compatibility example in `config/sample-macros.cfg`:
  - M808 Ln        ; Loop for N times, or infinitely if N is 0
  - M808           ; End of loop
  - M808 K         ; Complete all loops without iterating

Added unit tests in test/klippy/sdcard_loop.test

See https://reprap.org/wiki/G-code#M808:_Set_or_Goto_Repeat_Marker

Signed-off-by: Jason S. McMullan <jason.mcmullan@gmail.com>
 2021-05-26 11:57:57 -04:00
Kevin O'Connor 8f76e53c0e stepper: Remove min_stop_interval from mcu code 
Now that the host never uses a min_stop_interval, remove it from the
mcu code.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-04-30 11:26:19 -04:00
Dmitry Butyugin 200b62bcb4 adxl345: Verify the register writes, added debug adxl345 commands 
Signed-off-by: Dmitry Butyugin <dmbutyugin@google.com>
 2021-04-24 13:15:17 -04:00
Clifford Roche e2a3217289
palette2: Add support for P2 devices (#4057) 
Module which bring support for P2 devices running in connected mode. This enables using a Palette2 directly with Klippy without Octoprint, or without Palette2 plugins for Octoprint which are not functional out of the box with Klipper.

Signed-off-by: Clifford Roche <clifford.roche@gmail.com>
 2021-03-26 11:21:10 -04:00
TheJoshW bf8f7133b4
filament_motion_sensor: Add filament_motion_sensor (#3857) 
Add functionality to support a Filament Motion Sensor for detecting extruder jams as well as runouts.  Works by an encoder toggling the switch_pin 0/1 as the filament is pulled through the sensor.

Signed-off-by: Joshua Wherrett <thejoshw.code@gmail.com>
 2021-03-14 21:36:19 -04:00
Kevin O'Connor 715b89ce0c docs: Rename Sensorless_homing.md to TMC_Drivers.md and extend 
Add additional information on configuring and using TMC drivers.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-03-10 20:09:34 -05:00
Lane Roberts 19397a0a2b
temperature_fan: Add MAX_SPEED and MIN_SPEED to SET_TEMPERATURE_FAN_TARGET command (#3873) 
Allows setting min_speed and max_speed at runtime, rather than updating the config and restarting.

Signed-off-by Lane Roberts <nolatari@vandarin.net>
 2021-02-02 14:30:04 -05:00
Dmitry Butyugin a8b282d67a resonance_tester: Disable input shaping for resonance testing 
Signed-off-by: Dmitry Butyugin <dmbutyugin@google.com>
 2021-02-02 14:13:24 -05:00
Dmitry Butyugin 0fb2449be0 adxl345: Add accelerometer chip name to the raw data file name 
Signed-off-by: Dmitry Butyugin <dmbutyugin@google.com>
 2021-02-02 14:13:24 -05:00
Justin Schuh a5ebe5825a
heaters: Make MINIMUM optional for TEMPERATURE_WAIT command (#3674) 
Signed-off-by: Justin Schuh <code@justinschuh.com>
 2020-12-24 11:34:26 -05:00
Justin Schuh 1a9218532b heaters: Add MAXIMUM option to TEMPERATURE_WAIT command 
Signed-off-by: Justin Schuh <code@justinschuh.com>
 2020-12-23 18:16:46 -05:00
Dmitry Butyugin ab93ee9293 docs: Limiting max_smoothing for input shaper autocalibration 
Signed-off-by: Dmitry Butyugin <dmbutyugin@google.com>
 2020-12-22 18:37:41 -05:00
Kevin O'Connor 7dcc778b6c stepper: Calculate step_distance from rotation_distance 
Add support for automatically calculating the internal step_distance
from new config parameters - rotation_distance, microsteps,
full_steps_per_rotation, and gear_ratio.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-12-18 10:30:32 -05:00
Kevin O'Connor e83801daab heaters: Add a TEMPERATURE_WAIT command 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-12-07 09:57:13 -05:00
Kevin O'Connor d7053f6e71 save_variables: Support saving variables to a disk file 
Signed-off-by: Dushyant Ahuja dusht.ahuja@gmail.com
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-12-03 12:19:47 -05:00
Kevin O'Connor 88c7bf830f G-Codes: Minor formatting fix 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-11-23 11:52:46 -05:00
Kevin O'Connor d1173d59c9 docs: Add more links to G-Codes.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-11-23 11:25:19 -05:00
Kevin O'Connor 15b5dbaf8f docs: Move config reference information to new Config_Reference.md 
Move all the config reference information from files in the config/
directory to a new Config_Reference.md document.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-11-18 20:10:21 -05:00
Kevin O'Connor 7263077db5 neopixel: Add support for RGBW LEDs 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-10-29 12:00:25 -04:00
Dmitry Butyugin f8c4f90c04
resonance_tester: Resonance testing and input shaper auto-calibration (#3381) 
Signed-off-by: Dmitry Butyugin <dmbutyugin@google.com>
 2020-10-14 20:08:10 -04:00
Kevin O'Connor 55e20f2c19 mcu: Add support for changing cycle_time in set_pwm() 
Signed-off-by: Guy Shapira <gayuha@gmail.com>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-09-26 20:55:56 -04:00
Arksine 3ac636b33e docs: document additions to BED_MESH_CALIBRATE 
Signed-off-by:  Eric Callahan <arksine.code@gmail.com>
 2020-09-15 20:36:55 -04:00
Kevin O'Connor 9197975625 docs: Note that FORCE_MOVE can lead to "No next step" errors in G-Codes.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-09-08 10:18:28 -04:00
Kevin O'Connor 3405095f0a adxl345: Add support for adxl345 accelerometer 
Add support for taking measurements from an adxl345 accelerometer via
SPI interface.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-09-05 09:11:04 -04:00
bondus c9e7119a93
fan_generic: Add support for named fans and gcode to control them (#3054) 
Signed-off-by: Pontus Borg <liquidpontus@yahoo.se>
 2020-08-07 11:39:44 -04:00
Arksine 74c0e3a484 docs: document changes to the virtual_sdcard module 
Signed-off-by:  Eric Callahan <arksine.code@gmail.com>
 2020-08-05 13:46:24 -04:00
Kevin O'Connor 25a9a32ecb docs: Move SET_TEMPERATURE_FAN_TARGET to its own section in G-Codes.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-07-26 10:41:43 -04:00
Martin Nowroth ab923883f7
docs: Update G-Codes.md for SET_TEMPERATURE_FAN_TARGET (#3122) 
Added extended G-Code documentation for SET_TEMPERATURE_FAN_TARGET

Signed-off-by: Martin Nowroth <madnoth@gmail.com>
 2020-07-26 10:39:53 -04:00
Kevin O'Connor 428a8d4881 servo: Remove servo ENABLE parameter 
Allow one to disable servos via `SET_SERVO WIDTH=0` instead of using
an explicit ENABLE parameter.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-07-25 11:39:39 -04:00
Dmitry Butyugin 4bdc11a8b3
input_shaper: Initial support of input shaping (#3032) 
Input shaping can help to reduce printer vibrations due to resonances
and eliminate or reduce ghosting in prints.

Signed-off-by: Dmitry Butyugin <dmbutyugin@google.com>
 2020-07-05 20:54:38 -04:00
Kevin O'Connor 467e8e6f40 display: Default DISPLAY=display in SET_DISPLAY_GROUP command 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-06-09 12:19:53 -04:00
Florian Heilmann 68fcbe2a62
display: add SET_DISPLAY_GROUP command (#2969) 
Signed-off-by: Florian Heilmann <Florian.Heilmann@gmx.net>
 2020-06-09 12:07:25 -04:00
theophile 518fe023b4
extruder_stepper: Support changing synced extruder on the fly (#2824) 
Signed-off-by: Christopher Meredith <chmeredith@gmail.com>
 2020-06-06 14:30:58 -04:00
Dushyant Ahuja 1eb2d4da90
docs: Clarify that Probe_Calibrate uses the speed variable for XY as well (#2735) 
Signed-off-by: Dushyant Ahuja <dusht.ahuja@gmail.com>
 2020-05-05 09:03:39 -04:00
David Smith d4bf61262e
Extruder: Add g-code to set extruder step_distance (#2598) 
Signed off by: David Smith <davidosmith@gmail.com>
 2020-03-28 09:52:46 -04:00
Kevin O'Connor 849cc075dc docs: Fix typo in MANUAL_STEPPER command line 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-03-23 15:06:32 -04:00