Commit Graph

1112 Commits

Author SHA1 Message Date
Kevin O'Connor 84bae6ff41 mcu: Fix reserve pin check
Fix typo causing conflict with mcu name and constant name.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-05-21 09:40:13 -04:00
LyleCheatham 1235972b77 util: Ignore errors in clear_hupcl (allows OSX to run)
Signed-off-by: Lyle Cheatham <hello@lylecheatham.com>
2019-05-20 16:49:42 -04:00
Stephan de7ead1783 tmc5160: Add support for TMC5160 steppers (#1637)
Signed-off-by: Stephan Oelze <stephan.oelze@gmail.com>
2019-05-20 16:29:37 -04:00
alfsoft 777013da4f menu: Changed Menu item "Feed Filament" name (#1609)
"Feed Filament" menu item value was off-screen that made this item useless. So I changed its name to just "Feed". Users shall easily guess that this item is for filament feeding because this item is located in "Filament" menu.

Signed-off-by: Alexander Fadeev <alfsoft@gmail.com>
2019-05-09 14:41:37 -04:00
fess 0a9e3b744c quad_gantry_level: Limit maximum adjustment
safety feature that prevents quad_gantry_level from trying to do a
correction that might break things - if your probe fires early for
whatever reason and tries to do an 8mm correction in one corner instead
we abort if a correction is over a configurable limit by default 4mm

configurable via `max_adjust` parameter in the config

Signed-off-by: John "Fess" Fessenden <fess@fess.org>
2019-05-01 14:35:24 -04:00
fess af78d854ac quad_gantry_level: More compact info messages
In particular trying to keep the output from a single quad_gantry_level
so that it fits in the octoprint terminal window without the need to
scroll

Signed-off-by: John "Fess" Fessenden <fess@fess.org>
2019-05-01 14:34:10 -04:00
Martin Nowroth 60bc93f36b temperature_fan: Add gcode command for temperature_fan.py (#1520)
Adding gcode command for setting the target temperature of temperature_fan.
Example gcode: SET_TEMPERATURE_FAN_TARGET temperature_fan=chamber target=35.0

Signed-off-by: Martin Nowroth <madnoth@gmail.com>
2019-04-15 21:13:29 -04:00
Len Trigg 1102c6c232 tsl1401cl_filament_width_sensor: Fix incorrect math in filament width sensor. (#1541)
The parameter to the M221 command should be the ratio of the nominal to
measured filament area, rather than the ratio of the diameters. Since we
are taking the ratio, most of the area calculation cancels out.

Fixes #1535.

Signed-off-by: Len Trigg <lenbok@gmail.com>
2019-04-15 21:11:26 -04:00
Dmitry 1b92af6078 display: Add ST7567 display support (#1540)
Signed-off-by: Dmitry Budaev <condemil@gmail.com>
2019-04-15 21:07:29 -04:00
Trevor Jones 9cb21de68e virtual_sdcard: consistent sorting (#1387)
Signed-off-by: Trevor Jones <trevorjones141@gmail.com>
2019-04-14 11:34:22 -04:00
Daniel 7373e92092 serialhdl: Enforce exclusive access on POSIX, this is default behavior on windows. (#1216)
Signed-off-by: Daniel Joyce <daniel.a.joyce@gmail.com>
2019-04-14 11:27:43 -04:00
Janar Sööt 0a392b6543 menu: initial support for analog buttons (#977)
Signed-off-by: Janar Sööt <janar.soot@gmail.com>
2019-04-14 11:18:52 -04:00
Kevin O'Connor d7e1061c63 bus: Don't reserve any pins if BUS_PINS_x is not defined
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-04-07 20:43:23 -04:00
Janne Grunau 478a916f51 replicape: add support for Linux hardware PWM (#1443)
The servo pins (P9_14/P9_16) are muxed to the SOCs hardware PWM unit
driven by a 13MHz GP timer. They have to be driven by the linux host
mcu. This commits adds hardware PWM support using the linux sysfs
user space interface.

The servo pins can be specified as "replicape:servo0" and
"replicape:servo1". Removes the "servo0_enable", "servo1_enable"
configuration parameters.
Fixes #1105.

Signed-off-by: Janne Grunau <janne-3d@jannau.net>
2019-04-06 13:51:51 -04:00
Kevin O'Connor 516fbf4f32 klippy: Report the underlying error on an internal error during connect
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-04-04 18:38:46 -04:00
Kevin O'Connor 79ecee0996 homing_override: Use gcode_macro style templates on gcode
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-04-04 18:35:23 -04:00
Kevin O'Connor 7d246e2624 probe: Use gcode_macro style templates on activate/deactivate_gcode
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-04-04 18:35:23 -04:00
Kevin O'Connor 486c07c190 gcode_macro: Evaluate macros using Jinja2 template engine
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-04-04 18:35:23 -04:00
Kevin O'Connor f8bde6b1ef linux: Convert SPI to use enumerations
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-04-04 18:29:31 -04:00
Kevin O'Connor bc9fd03dab atsamd: Use enumerations for buses and reserve pins
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-04-04 18:29:31 -04:00
Kevin O'Connor 1ab02e5225 bus: Support bus enumerations and add support for reserved pins
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-04-04 18:29:31 -04:00
Kevin O'Connor 4c3d50693e bus: Change bus parameter in config_spi/config_i2c
Be explicit when using an spi_bus vs i2c_bus in the parameter name.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-04-04 18:29:31 -04:00
Kevin O'Connor be6b29fabf sx1509: Convert code to use generic i2c bus support
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-04-04 18:29:30 -04:00
Arksine 2e16be224e uc1701: make contrast configurable
Signed-off-by:  Eric Callahan <arksine.code@gmail.com>
2019-04-02 15:53:16 -04:00
Kevin O'Connor 60ff2e9dc1 force_move: Avoid divide by zero in move time calculation
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-03-31 09:00:23 -04:00
Kevin O'Connor 75b73b09d6 corexy: Fix minimum halt velocity
Due to the corexy kinematics, the individual steppers may have a
velocity of sqrt(2) times faster than the cartesian velocity _and_ can
have an acceleration of sqrt(2) times faster.  Make sure to calculate
in the higher acceleration.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-03-30 14:35:18 -04:00
Douglas Hammond c105adc80b temperature_fan: Fix. Temperature fan min speed should be used (#1405)
Signed-off-by: Douglas Hammond <wizhippo@gmail.com>
2019-03-28 14:07:40 -04:00
Kevin O'Connor 907dd88ceb msgproto: Propagate original error message in create_command()
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-03-28 09:32:09 -04:00
Florian Heilmann bece690c5b tmc2660: Automate VSENSE computation
Adjust the HEND default, which was faulty after the the fields update, remove disallowance of setting CS

Signed-off-by: Florian Heilmann <Florian.Heilmann@gmx.net>
2019-03-22 20:38:42 -04:00
amblidex 0980b7e4ec tmc2130: add SET_TMC_CURRENT and SET_TMC_FIELD commands (#1419)
Signed-off-by: Frank Kang <amblidex@outlook.com>
2019-03-22 20:37:03 -04:00
lauckhart 7a344acde8 configfile: Add "include" support (#1359)
Allows configuration files to include other configuration files using
[include filename.cfg] syntax.  Klippy loads include files in the
position of the include header; subsequent definitions override
included values.  Supports wildcards (e.g. [include macros/*.cfg).
Allows included files to include other files but blocks recursion.

Signed-off-by: Greg Lauckhart <greg@lauckhart.com>
2019-03-22 20:31:40 -04:00
Matt Baker f2fbe98454 bed_mesh: enable relative offset bed meshes (#1323)
Adds parameter for bed meshes to be adjusted relative to a probed point
during calibration. This allows the probe z offset to be ignored for
probes that are not stable over time (for example, the thermal drift of
inductive probes). An endstop other than the probe is then necessary to
determine the bed-nozzle offset.

Signed-off-by: Matt Baker <baker.matt.j@gmail.com>
2019-03-21 10:39:22 -04:00
Robert Konklewski 6f91574cd9 menu: Show current positions based on gcode positions (#1389)
menu: Show current positions based on gcode positions

Added "move_[xyze]pos" properties to the "gcode" object for use in menus.
The new properties track the toolhead's position in gcode coordinates,
taking gcode and bed leveling offsets into account.
This position is equal to the value returned by M114 gcode.

Changes the move menus to show current position based on gcode
position. This allows gcode offsets and bed leveling offsets
to be taken into account, and prevents unexpected toolhead
movements when moving it using the menu.

Signed-off-by: Robert Konklewski <nythil@gmail.com>
2019-03-21 10:37:28 -04:00
Kevin O'Connor 746a378c18 endstop: Use "pin_value" instead of "pin" when querying endstop state
Now that enumerations are available, any variable named "pin" can only
be used to describe a gpio pin.  Rename the end_stop_state "pin"
parameter to "pin_value".  Also, rename "end_stop_query" command to
"end_stop_query_state" to notify users to upgrade both host and mcu
code.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-03-19 10:48:33 -04:00
Kevin O'Connor 53290664ee pins: Document support for '~' to enable pull-down resistors
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-03-17 21:07:31 -04:00
Kevin O'Connor 0af89e4766 thermocouple: Define thermocouple types using enumerations
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-03-17 19:38:18 -04:00
Kevin O'Connor 618b374ae5 pins: Simplify alias code
Simplify the pin aliasing code now that all pins are defined via
enumerations.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-03-17 19:38:18 -04:00
Kevin O'Connor df6136802a linux: Use enumerations for pin mappings
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-03-17 19:38:18 -04:00
Kevin O'Connor ae24baf99a pru: Use enumerations for pin mappings
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-03-17 19:38:18 -04:00
Kevin O'Connor 91cf497656 stm32f1: Use enumerations for pin mappings
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-03-17 19:38:18 -04:00
Kevin O'Connor 8aa8feedb8 lpc176x: Use enumerations for pin mappings
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-03-17 19:38:18 -04:00
Kevin O'Connor 7e2c0ffa91 atsamd: Use enumerations for pin mappings
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-03-17 19:38:18 -04:00
Kevin O'Connor 8b0195f896 atsam: Use enumerations for pin mappings
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-03-17 19:38:18 -04:00
Kevin O'Connor 8f541d090e avr: Use enumerations for pin mappings
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-03-17 19:38:18 -04:00
Kevin O'Connor db6e2d4c9e msgproto: Convert static strings to a more generic enumeration system
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-03-17 19:38:18 -04:00
Kevin O'Connor 7eda55e2b0 buildcommands: Use dictionaries to describe commands, responses, and output
Avoid transmitting lists of message ids for commands and responses -
gzip doesn't do a good job of compressing them.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-03-17 19:38:18 -04:00
Kevin O'Connor d3f6dad853 controller_fan: Allow multiple controller_fan sections to be defined
It may be necessary to define multiple fans, so allow each config
section to be named.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-03-10 13:57:01 -04:00
Arne Jansen f145439267 z_tilt: bugfix for final correction of z-offset
The z_adjust offset provided to adjust_steppers is calculated given the
steppers adjust exactly according to the given x_adjust/y_adjust. As the
algorithm eliminates an offset that is common to all steppers, this offset
must be taken into account in the final correction.

Signed-off-by: Arne Jansen <arne@die-jansens.de>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-03-10 12:00:35 -04:00
amblidex e2af1c1f2a menu: Set input_max for moving toolhead in menu to same value for all move increments (#1372)
Signed-off-by: Frank Kang <amblidex@outlook.com>
2019-03-08 14:11:47 -05:00
Kevin O'Connor 1b1d3f15d8 probe: Fix PROBE_CALIBRATE command
The z_offset calculation should have been calculated from the probe
height to the measured bed position.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-03-08 12:34:13 -05:00