4ea11dbb4f
trapq: Minor code movement in trapq.c
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2023-01-07 14:13:00 -05:00
01f90e8f28
console: No need to import pins module
...
The pins module is no longer used in console.py.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2023-01-07 12:00:16 -05:00
4395ae96a7
serialhdl: Add a get_serialqueue() method
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2023-01-06 11:59:35 -05:00
a564824009
serialqueue: Add comment to do_write()
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2023-01-05 03:09:43 -05:00
cbc17a7cb6
docs: Note v0.11.0 release in Config_Changes.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2023-01-04 12:04:45 -05:00
3cd8a72e60
spi_flash: Add SKR2 F429 chip variant to spi_flash ( #5956 )
...
Later addition of a F429 variant SKR2 was released. Changed btt-skr2 to btt-skr-2-f407 and added a new alias for btt-skr-2-f429
Signed-off-by: James Hartley <james@hartleyns.com>
2023-01-04 12:01:28 -05:00
448c1a1488
stm32: Reindent ifdefs in stm32f0_i2c.c
...
A whitespace and comment change only - no functional changes.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2023-01-03 12:52:35 -05:00
9c2ccceb9f
stm32: Expand stm32g0 family ( #5838 )
...
Add stm32g07x family support.
Signed-off-by: Alex Voinea <voinea.dragos.alexandru@gmail.com>
2023-01-03 12:43:46 -05:00
b337cc3ee8
config: Added precise location of [bed_screws] for Ender-3-s1 ( #5944 )
...
Signed-off-by: Stas Yakobov <stas@3os.org>
2023-01-02 15:22:46 -05:00
40d8c2ef16
palette2: Fix errors with bad handling of NoneType in a few locations
...
Issue specific to Python 3, NoneType is being used to compare heartbeat time (actually caused by invalid condition operator), and by returning NoneType in timer functions.
Signed-off-by: Clifford Roche <clifford.roche@gmail.com>
2022-12-31 21:03:37 -05:00
6ae6aaf711
board_defs: Add Fysetc Cheetah V2 to spi_flash ( #5952 )
...
As discussed with user HiitsameAsh on discord, he has confirmed this addition will flash a Fysetc Cheetah V2
Signed-off-by: James Hartley <james@hartleyns.com>
2022-12-31 18:26:30 -05:00
f57ff2c07e
docs: Fix typo in mpu9250 documentation
...
Adding MPU-6515, replacing MPU-9255 duplicate
Signed-off-by: Andrei Kozhevnikov <coderusinbox@gmail.com>
2022-12-30 22:28:59 -05:00
29ba5ab05a
delta: Better delta build volume constraint check
...
Existing code uses very restrictive build volume constraint checking
with just narrow cone on top of fully cylinder for delta printers.
Code here implements more permissive and still safe build volume
constraint checks.
Signed-off-by: Jan Herich <jan.herich@gmail.com>
2022-12-30 21:39:32 -05:00
1ff0a5494a
stm32: Check for CONFIG_HAVE_BOOTLOADER_REQUEST in dfu_reboot.c
...
Support disabling dfu_reboot if HAVE_BOOTLOADER_REQUEST is disabled in
the Kconfig rules.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-12-30 21:28:32 -05:00
b51b068442
avr: No need to define bootloader_request()
...
Since avr does not define HAVE_BOOTLOADER_REQUEST it is not necessary
to define the function.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-12-30 21:28:32 -05:00
c620f4836e
canserial: Only call bootloader_request() if CONFIG_HAVE_BOOTLOADER_REQUEST
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-12-30 21:28:32 -05:00
34fd3f41ea
usb_cdc: Only call bootloader_request() if CONFIG_HAVE_BOOTLOADER_REQUEST
...
Check for the build symbol prior to calling bootloader_request().
Enable the build symbol on rp2040, atsam, and atsamd chips.
This also enables serial bootloader requsts on rp2040, atsam, and
atsamd.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-12-30 21:28:32 -05:00
806cf233ec
stm32: Include "misc.h" in stm32l4.c and stm32g4.c
...
Include for bootloader_request() definition.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-12-30 21:28:32 -05:00
4ca1e5f670
serial_irq: Rename SERIAL_BOOTLOADER_SIDECHANNEL to HAVE_BOOTLOADER_REQUEST
...
Rename the build symbol. This is in preparation for enabling
HAVE_BOOTLOADER_REQUEST on usb and canbus.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-12-30 21:28:32 -05:00
4753315601
Kconfig: No need to specify "default n" in main Kconfig file
...
A "bool" option already defaults to "n" so no need to state that
explicitly.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-12-30 21:28:32 -05:00
9b60daf62d
tmc: Configurable microstep lookup table ( #5920 )
...
Make all the microstep lookup table registers configurable via the
config file. It also loads the default values.
TMC220x and TMC2660 do not support this feature.
Signed-off-by: Alex Voinea <voinea.dragos.alexandru@gmail.com>
2022-12-21 21:23:23 -05:00
aac613bf44
scripts: support CanBoot on RP2040 in flash_usb.py
...
Signed-off-by: Chris Lee <clee@mg8.org>
2022-12-19 15:42:53 -05:00
f078a27905
manual_probe: Add Z_OFFSET_APPLY_ENDSTOP for delta
...
Current Z_OFFSET_APPLY_ENDSTOP command only works for printers
with cartesian architecture which have separate Z axis defined.
But this functionality (persisting Z babystep value to endstops)
is exactly as convinient for delta printers, therefore this
PR implements it.
Signed-off-by: Jan Herich <jan.herich@gmail.com>
2022-12-19 13:14:06 -05:00
8621ebbed2
bed_mesh: Allow bedmeshing at 1mm spaced intervals ( #5918 )
...
Signed-off-by: Keyan Mobli <keyan@kmobli.com>
2022-12-19 11:14:45 -05:00
4af8786587
stm32: Move dfu reboot logic to new dfu_reboot.c file
...
Move the stm32 DFU reboot logic to a new dfu_reboot.c file. This
simplifies the per-chip code.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-12-18 19:50:08 -05:00
b6cd77f6e3
stm32: Separate out USB DFU reboot logic in stm32l4.c
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-12-18 19:50:08 -05:00
be74c72555
stm32: Separate out USB DFU reboot logic in stm32g4.c
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-12-18 19:50:08 -05:00
2a25733cd8
screws_tilt_adjust: Add get_status() method ( #5921 )
...
Signed-off-by: Christopher Meredith <chmeredith@gmail.com>
2022-12-17 11:39:25 -05:00
3c1ed3bb27
initial_pins: Add check to reduce compile time size when not in use
...
Add a check to the start of initial_pins_setup() to make it easier for
gcc to optimize the code if it is not in use.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-12-16 22:46:47 -05:00
0c43ae1fd4
stm32: Just clean dcache instead of disabling on stm32h7 dfu reboot
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-12-16 17:29:45 -05:00
02b45c91fb
armcm_reset: Flush dcache before rebooting into canboot
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-12-16 17:26:41 -05:00
b0d9cbfb4b
stm32: Fix usb build on stm32g0b0
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-12-15 18:43:25 -05:00
7d1df81e5e
stm32: Fix USB support on stm32g0b1
...
A typo in commit e33b41ab
2022-12-15 11:44:12 -05:00
41c7bb818f
test: Add compile test builds for stm32g431, stm32h723, stm32l412
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-12-15 11:27:28 -05:00
ac090d9d52
stm32: Fix stm32l4 build
...
Commit c5d56f44
2022-12-15 11:27:19 -05:00
f31540b357
stm32: Minor changes to stm32g0b0 ifdefs
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-12-15 10:27:51 -05:00
e33b41abaa
stm32g0: add stm32g0b0 support
...
Signed-off-by: Alex Voinea <voinea.dragos.alexandru@gmail.com>
2022-12-15 10:05:43 -05:00
9d668d63a7
stm32: Rework usb_reboot_for_dfu_bootloader() so it works on stm32h723
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-12-15 09:52:21 -05:00
f6199ef613
config: Update generic-bigtreetech-octopus.cfg for f429 and h723 chips
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-12-15 09:50:01 -05:00
fe0fc29616
rp2040: Move watchdog code to new watchdog.c file
...
Move the watchdog code to its own file so that it is easier to disable
it for development builds.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-12-14 19:21:25 -05:00
9b342c65c8
armcm_link: Rename CONFIG_FLASH_START to CONFIG_FLASH_APPLICATION_ADDRESS
...
Rename the build symbol name for better clarity on what it represents.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-12-14 18:44:07 -05:00
dc94a35752
lpc176x: Fix lpc176x build
...
Fix build error introduced in commit 6ba2c3e1
2022-12-14 14:50:31 -05:00
d40ebdab06
canbus: Rename canserial_send() to canbus_send()
...
Rename canserial_send() to canbus_send() and canserial_set_filter() to
canbus_set_filter(). This makes it more clear where the code should
reside.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-12-14 14:25:21 -05:00
52a6bed24e
canbus: Rename canbus_send() to canhw_send()
...
Rename canbus_send() to canhw_send() and rename canbus_set_filter() to
canhw_set_filter(). This makes it more clear where the code should
reside.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-12-14 14:15:14 -05:00
e16a693b1e
rp2040: Fix copy-paste error in Kconfig comment
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-12-14 13:34:15 -05:00
6ba2c3e1d1
lpc176x: Use "Bootloader offset" prompt in "make menuconfig"
...
Use the same bootloader offset terminology that is used with other
chips (eg, stm32).
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-12-14 13:29:39 -05:00
347dfa58ea
gcode_arcs: Allow either one of I, J, K to be default-zero on G2/G3 ( #5939 )
...
Signed-off-by: Wijnand Modderman-Lenstra <maze@pyth0n.org>
2022-12-14 12:06:11 -05:00
69f76b3b66
stm32: Apply race fixes to stm32h7_adc.c
...
Improve handling of race conditions with hardware updates. This is
the same changes applied to stm32f0_adc.c in commit 88325b6c
2022-12-12 23:46:49 -05:00
201f715b55
save_variables: Verify filename path is writeable at startup
...
Signed-off-by: Justin Schuh <code@justinschuh.com>
2022-12-11 21:07:47 -05:00
ba365aff96
gcode_arcs: No need to import gcode module to access Coord()
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-12-11 20:59:02 -05:00
Kevin O'Connor