67c6234907
config: Add printer-wanhao-duplicator-6-2016.cfg
...
Signed-off-by: Cliff Raccani <bramhall45@hotmail.com>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-09-16 19:52:41 -04:00
32b763efb1
config: Fix generic-re-arm.cfg encoder pins
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-09-12 14:43:10 -04:00
d459ae648d
config: Update generic-re-arm.cfg with menu buttons
...
Reported by @J-charles-C.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-09-12 09:07:50 -04:00
e3a49dc692
quad_gantry_level: Add gantry leveling (ruled hyperbolic parabola correction) ( #631 )
...
Signed-off-by: Maks Zolin <mzolin@vorondesign.com>
2018-09-12 08:33:20 -04:00
0c0087ce42
config: Update example-extras.cfg ( #641 )
...
Just correcting a couple of spelling errors I noticed.
Signed-off-by: Ben Warren <boffdroid@gmail.com>
2018-09-12 08:13:12 -04:00
947a7b2b0f
tmc2660: Implementation of TMC2660 extra ( #621 )
...
Signed-off-by: Florian Heilmann <Florian.Heilmann@gmx.net>
2018-09-11 12:34:05 -04:00
ea7de3bcad
config: Use fastest PWM time in mini-rambo PWM DAC config
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-09-11 09:40:48 -04:00
b595c3e423
config: Add example lcd section to smoothieboard config
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-09-10 15:29:54 -04:00
ea129d869e
config: Fix position_endstop typo in sample-bltouch.cfg
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-09-09 10:30:06 -04:00
aac2fee9de
config: Add display buttons pins for anycubic kossel pulley 2016 ( #614 )
...
Signed-off-by: Alejandro <alemorbel@alemorbel.es>
2018-09-06 18:31:55 -04:00
a8d4a7ef46
config: Be clear that multi-line parameters must use indentation
...
Also, be clear that probe points are nozzle coordinates (not probe
coordinates).
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-09-02 14:40:26 -04:00
b656792616
config: Add encoder pins to Creality Ender2 and CR10 configs
...
Reported by @faboaic.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-09-02 11:52:20 -04:00
40b7ba5111
probe: Add ability to multi-sample points to ProbePointsHelper
...
Signed-off-by: Eric Callahan <arksine.code@gmail.com>
2018-08-29 12:01:19 -04:00
4acda88e8d
docs: Fix spelling error in example-extras.cfg
...
Fix "interally" spelling error - reported by @bistory.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-08-28 15:36:53 -04:00
ca7a80a946
tmc2208: Initial support for configuring TMC2208 drivers
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-08-27 12:51:27 -04:00
79632878ac
config: Updates to printer-wanhao-duplicator-i3-v2.1-2017.cfg
...
Add lcd encoder pins. Add comment on 10K pullups.
Signed-off-by: Carlos Felicio <cfeliciomobil@gmail.com>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-08-27 08:45:04 -04:00
22132a5516
config: Add encoder buttons to generic-ramps.cfg
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-08-26 23:08:27 -04:00
e6208c6f02
config: Added pins for LCD encoder and button click on Creality Ender 3 ( #574 )
...
Signed-off-by: Gonzalo Ramírez <controla@gmail.com>
2018-08-26 23:05:13 -04:00
65f0fd6238
display menu module for klipper
...
Signed-off-by: Janar Sööt <janar.soot@gmail.com>
2018-08-20 22:33:05 -04:00
3387cccdcf
bed_mesh: move probe x and y offsets to the [probe] module
...
All probe offsets are now passed to the finalize() callback in the ProbePointsHelper Class.
Signed-off-by: Eric Callahan <arksine.code@gmail.com>
2018-08-19 16:52:23 -04:00
08aacec0b2
config: Update example-extras.cfg ( #544 )
...
Changed 'endstop' to 'stepper' in 'multi-steppers axes' section
Signed-off-by: Ben Warren <boffdroid@gmail.com>
2018-08-19 10:15:48 -04:00
1b07be070b
heater_fan: Allow multiple heaters to be defined for a heater_fan
...
Support the case where a single cooling fan is used with multiple
extruders.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-08-17 10:20:12 -04:00
f337fb1802
config: update examples-extra.cfg to include the bed_mesh module
...
Signed-off-by: Eric Callahan <arksine.code@gmail.com>
2018-08-17 09:22:55 -04:00
43179d7b6c
config: Minor changes to example-extras.cfg documentation
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-08-03 13:00:40 -04:00
c0c892d524
force_move: Add support for FORCE_MOVE command
...
Add initial support for commands that will forcibly move a stepper
(without updating the kinematic classes with the new position).
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-07-26 12:44:07 -04:00
63dffd9307
spi_temperature: Provide a default value for spi_speed
...
All of the Maxim chips support a 4Mhz spi transfer rate, so use that
as a default spi speed.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-07-24 15:49:14 -04:00
5b124d59f2
spi_temperature: Remove spi_mode parameter
...
All of the Maxim chips can use SPI mode 1, so no need to configure it.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-07-24 15:47:17 -04:00
eba252d3fd
thermocouple: Add initial support for common SPI temperature sensing chips
...
Signed-off-by: Petri Honkala <cruwaller@gmail.com>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-07-24 11:16:05 -04:00
acefe26e0f
idle_timeout: Move timeout handling from toolhead.py to new extras module
...
Move the "motor_off_timeout" tracking to a new module in the extras/
directory. This makes it easier to customize the idle timeout
behavior.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-07-16 10:32:48 -04:00
0025fbf10d
toolhead: Replace junction_deviation with square_corner_velocity
...
The junction_deviation configuration parameter has a number of quirks
that make it difficult to configure. Replace it with a
"square_corner_velocity" configuration parameter.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-07-16 10:32:43 -04:00
94dc8167c9
z_tilt: Don't default "points" parameter to "z_positions" parameter
...
It's rare to have all the Z stepper locations directly under the
printable surface, so using z_positions for points is not a good
default.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-07-15 10:30:27 -04:00
21563c5965
config: Minor updates to example-extras.cfg
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-07-12 12:18:31 -04:00
70b5e1eb69
Add Printer Configuration File for the Tronxy X8
...
Added printer-tronxy-x8-2018.cfg for the Tronxy X8 with the CXY-V2-0508 board.
Signed-off-by: Seyed Seraj <s.seraj@hotmail.com>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-07-10 11:59:07 -04:00
f7c2d918b6
config: Update Smoothieboard configs with notes on flashing the devices
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-07-08 10:45:17 -04:00
b0ee323e2e
heater: Introduce smooth_time config option; remove pid_deriv_time
...
Add generic temperature smoothing to the Heater class. This is useful
to avoid min_extrude_temp and verify_heater errors due to measurement
noise.
Rename the pid_deriv_time config option to smooth_time so that the
smoothing amount need only be specified once.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-07-06 13:47:10 -04:00
5b3444c060
config: Add Anycubic Kossel plus size delta printer config
...
Signed-off-by: Hans Raaf <hr-klipper@oderwat.de>
2018-07-02 12:28:19 -04:00
d725160706
mcp4451: Add initial support for programming the mcp4451 on lpc176x
...
Add support for programming smoothieboard current.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-06-29 21:20:12 -04:00
efb27f095c
build: Cleanup whitespace errors
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-06-28 13:00:20 -04:00
f529d7476d
config: update Creality Ender 2 configuration to include display
...
Signed-off-by: Eric Callahan <arksine.code@gmail.com>
2018-06-27 19:46:38 -04:00
696ee69f2c
config: update example-extras.cfg to include uc1701 display
...
Signed-off-by: Eric Callahan <arksine.code@gmail.com>
2018-06-27 19:46:38 -04:00
af1cd3c4ce
config: add configuration for Creality Ender 2
...
Signed-off-by: Eric Callahan <arksine.code@gmail.com>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-06-27 12:35:08 -04:00
d651851567
pru: Disable ADC reading directly from the PRU
...
The PRU code size has grown too close to the maximum - remove the ADC
code to reduce its overall size. (On the beaglebone, the Linux
process can, and typically does, do the ADC reading.)
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-06-27 12:10:25 -04:00
f08a0c5e93
lcd_st7920: Use a longer delay at the start of each command/data
...
It appears the st7920 requires a longer delay when switching from
command to data mode (and vice-versa). Slower MCUs don't show a
problem because the klipper command processing time results in a
sufficient delay. However, some of the faster MCUs can process
klipper commands fast enough that the next st7920 transfer is sent too
fast. Add an additional delay to account for this.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-06-22 23:47:09 -04:00
76e2b041b4
config: Add generic config for Re-Arm (LPC1768)
...
Signed-off-by: Ax Smith-Laffin (ax@darknetweb.co.uk )
2018-06-21 15:51:40 -04:00
d94c856118
display: Allow the ST7920_DISPLAY parameter to be configured
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-06-21 09:58:35 -04:00
7a606633fa
config: anet e10 update
...
Signed-off-by: Zsolt Olah <beer.olius@gmail.com>
2018-06-19 11:36:52 -04:00
268e39fe52
config: Add "axes: z" and "G4 P100" to sample-bltouch.cfg
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-06-13 22:32:45 -04:00
e110e1fecc
homing_override: Add axes config parameter
...
Added a config parameter to define the homing override axes. This way
one can still home x and y axis without the z-probe cycle coming in the
way.
Signed-off-by: Hans Raaf <hr-klipper@oderwat.de>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-06-11 20:41:18 -04:00
e90edc0447
config: Add configuration file for the Anycubic Kossel delta printer
...
The printer uses the TriGorilla board which is an
AVR ATmega2560 Arduino + RAMPS compatible board.
The diplay is a RepRapDiscount Smart Controller 2004 compatible one.
Signed-off-by: Peter Ruevski <dpr@ruevs.com>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-06-07 13:46:33 -04:00
f020ed179e
config: Add sample voron2 config file
...
Add config/kit-voron2-2018.cfg - a sample configuration file for the
Voron2 printer. Based on config file from "Maglin".
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-06-01 21:38:19 -04:00
Clifford Raccani