3diy
/
klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
2,843 Commits 1 Branch 0 Tags 27 MiB
Commit Graph

495 Commits

Author SHA1 Message Date
Denis Ignatenko f84542cd20
hall_filament_width_sensor: Added virtual runout sensor (#2535) 
Signed-off-by: Denis Ignatenko deniss979@gmail.com
 2020-03-01 22:05:12 -05:00
Kevin O'Connor 26523d77ba docs: Minor wording change to Endstop_Phase.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-03-01 11:40:13 -05:00
FanDjango 16ecf15a91
bltouch: BTLOUCH V3.0/V3.1 Enable 5V/OD mode set commands (#2540) 
Signed-off-by: Mike Stiemke <fandjango@gmx.de>
 2020-02-23 22:32:07 -05:00
Kevin O'Connor 15f21be5ec manual_stepper: Support ignoring errors on STOP_ON_ENDSTOP 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-02-19 13:38:22 -05:00
Kevin O'Connor 01d985a739 docs: Recommend RPi 2 or later in Installation.md 
Reported by @patrickkettner.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-02-17 20:49:32 -05:00
test3210-d 9a65a4569b hall_filament_width_sensor: Add new filament sensor 
Signed-off-by: Denis Ignatenko <deniss979@gmail.com>
 2020-02-14 13:14:34 -05:00
Kevin O'Connor c3899cefa8 configfile: Add get_status() to export raw config file information 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-02-13 22:04:40 -05:00
Kevin O'Connor 512ad4b3a4 query_endstops: Add get_status() method that reports the last query state 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-02-12 19:32:48 -05:00
David Smith 596f5e3e3a
stepper_enable: Add SET_STEPPER_ENABLE gcode command (#2463) 
Signed-off-by: David Smith <davidosmith@gmail.com>
 2020-02-10 22:34:11 -05:00
Kevin O'Connor c36fe76d69 probe: Add support for configuring lift_speed 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-01-31 15:47:06 -05:00
Kevin O'Connor 2f8ad5e6ac docs: Update Config_Changes.md with actual bed_mesh merge date 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-01-09 14:17:51 -05:00
Arksine 46d0c6bdfc docs: Update Config_Changes.md to reflect bed_mesh changes 
Signed-off-by:  Eric Callahan <arksine.code@gmail.com>
 2020-01-09 14:14:13 -05:00
Arksine edae40c36f docs: Update documentation to reflect bed_mesh changes 
Also add new bed_mesh.md documentation.

Signed-off-by:  Eric Callahan <arksine.code@gmail.com>
 2020-01-09 14:14:13 -05:00
Kevin O'Connor 3fb0b7e4bc docs: Update Command_templates.md - numbers in gcode_macro name must be at end 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-01-07 20:58:39 -05:00
Kevin O'Connor 005cfea5c3 gcode: Fix detection of some "extended" g-code commands 
Fix typo that resulted in _get_extended_params() being called for all
commands.  Allow "extended" g-code commands to contain numbers.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-01-07 19:17:20 -05:00
David Smith 6972b6303d docs: Updates for gcode_macro naming (#2317) 
Add note about numbers in macro names.  Add note about variable name case restriction. Add set variable example.

Signed-off-by: David O Smith <davidosmith@gmail.com>
 2020-01-06 10:59:40 -05:00
Kevin O'Connor baa0d2ff8c docs: Minor formatting change to Config_checks.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-01-06 10:45:53 -05:00
Kevin O'Connor 5ff45636d9 docs: Minor FAQ updates 
Fix rendering of Patreon URL in FAQ.  Use same "ls" command to find
the serial port that Installation.md uses.  Note Raspberry Pi 4 is
supported.  Note problems with ModemManager.  Point to Bed_Level.md in
Z position_endstop question.  Link to Config_checks.md in "Z
screaching" FAQ.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-01-06 10:45:48 -05:00
Kevin O'Connor dabffcc22c kin_extruder: Convert pressure advance to use "weighted average" 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-12-20 12:21:58 -05:00
Kevin O'Connor b921b8a1c1 docs: Document support for M204 P and T parameters 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-12-18 16:34:45 -05:00
Kevin O'Connor 0a86190bae display: Revert "display: Add ST7567 display support (#1540)" 
This reverts commit 1b92af6078.

The standard "uc1701" lcd_type can now be used in place of the custom
"st7567" lcd_type.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-12-18 12:30:20 -05:00
BlackStump 7532e4ccea scripts: Replicape pru update start scripts (#2277) 
Signed-off-by: Trevor Wilson <altocoey@hotmail.com>
 2019-12-18 12:11:40 -05:00
Kevin O'Connor 254789f4c5 neopixel: Add support for delaying updates in SET_LED command 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-12-15 23:24:17 -05:00
Kevin O'Connor 1d05a34cd7 docs: Update Kinematics.md document with "smooth pressure advance" 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-12-13 17:52:51 -05:00
Kevin O'Connor 91bade5824 docs: Update Config_Changes.md with pointer to sample multi extruder configs 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-12-13 12:33:13 -05:00
Simon Kühling 2721211456 heater: Add PrinterHeater get_status() function 
Provide a list of available heater and sensor names to
gcode macro templates through the printer.heater.available_heaters
and printer.heater.available_sensors variables

Signed-off-by: Simon Kühling <mail@simonkuehling.de>
 2019-12-13 10:45:04 -05:00
Kevin O'Connor fcee27fc19 gcode: Remove builtin T0/T1/T2/... command support 
The builtin Tn command is not sufficiently flexible to control some
multi-extruder printers.  Remove the command and encourage users to
define individual gcode_macros for each Tn instance.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-12-10 14:24:32 -05:00
Kevin O'Connor c06618193d extruder: Add an ACTIVATE_EXTRUDER command 
Add support for an extended g-code command to change the currently
active extruder.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-12-10 14:23:13 -05:00
Kevin O'Connor ab2d302b7e gcode: Remove support for the M206 command 
The M206 command isn't particularly standardized and isn't issued by
default from 3rd party software in their standard configurations.
Encourage users to use the more powerful SET_GCODE_OFFSET command.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-12-10 14:23:10 -05:00
Kevin O'Connor 8663bc8192 docs: Update FAQ to emphasize checking Config_Changes.md on an upgrade 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-12-10 13:51:47 -05:00
Kevin O'Connor 205da598fd docs: Move upgrade instructions to the last item in the FAQ 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-12-10 13:39:49 -05:00
Kevin O'Connor 10270dc7ef docs: Fix another typo in Code_Overview.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-12-04 12:26:45 -05:00
Kevin O'Connor f82a85aad0 docs: Fix typo in Code_Overview.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-12-04 12:17:13 -05:00
Kevin O'Connor e17f2bac96 docs: Minor "coordinate system" wording change to Code_Overview.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-12-04 12:05:31 -05:00
Kevin O'Connor e557f2d0c0 docs: Add information on coordinate systems to Code_Overview.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-12-04 11:09:22 -05:00
Kevin O'Connor 8e87ab0939 gcode: Remove support for "G4 S1" style commands 
The S parameter is not a standard and was not commonly used.  The P
parameter (delay specified in milliseconds) is the commonly accepted
g-code mechanism for dwelling.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-12-02 19:31:20 -05:00
Kevin O'Connor 43bb45a1d3 docs: Minor update to Config_Changes.md 
Use same "ls /dev/serial/by-id/*" command used in Installation.md.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-12-01 14:25:40 -05:00
Kevin O'Connor 935088ddff docs: Clarify recent usb device name change in Config_Changes.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-12-01 10:29:15 -05:00
Kevin O'Connor e80ced5568 usb_cdc: Report MCU type on all boards 
Always report the "product id" as the MCU type (instead of as "Klipper
firmware").

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-11-26 08:45:20 -05:00
Kevin O'Connor 401f7a879c atsam: Enable chipid as usb serial number 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-11-26 08:42:14 -05:00
Kevin O'Connor d7ec5505a6 atsamd: Enable chipid as usb serial number 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-11-25 19:30:31 -05:00
Kevin O'Connor 8f6efe5a7b stm32: Enable chipid as usb serial number 
Signed-off-by: Matt Baker <baker.matt.j@gmail.com>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-11-25 19:30:31 -05:00
Kevin O'Connor 0b0e5a911e docs: Minor wording change in Pressure_Advance.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-11-25 11:48:41 -05:00
Kevin O'Connor 3aad25eab9 docs: Recommend normal slicer settings in Pressure_Advance.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-11-25 11:35:39 -05:00
Kevin O'Connor 3683273936 toolhead: Report which axes are homed via get_status() 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-11-24 20:21:13 -05:00
Kevin O'Connor 282af0220e toolhead: Report the current extruder from the get_status() method 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-11-24 20:21:13 -05:00
Kevin O'Connor 982567a69a config: Rename avrsim.cfg to generic-simulavr.cfg 
Rename the file to be more similar to the naming of other files.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-11-24 20:21:13 -05:00
Kevin O'Connor c188aa982f docs: Kinematics.md updates for extruder instantaneous corner velocity 
As of commit 5f5896ad Klipper will perform look-ahead between moves
even if they have significant differences in extruder flow rates.
Update Kinematics.md accordingly.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-11-22 17:04:14 -05:00
Kevin O'Connor 6d0c55b6c1 extruder: Initial support for "smoothed pressure advance" 
Support averaging the extruder position over a time range to "smooth
out" the velocity changes that occur during pressure advance.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-11-21 13:18:19 -05:00
Kevin O'Connor 430b8d0e52 usb_cdc: Report the MCU name instead of "Klipper firmware" 
Change the "product id" from the redundant "Klipper firmware" to the
CONFIG_MCU value.  For now, only make this change on boards that have
CONFIG_HAVE_CHIPID set.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-11-21 11:56:31 -05:00