3diy
/
klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
2,843 Commits 1 Branch 0 Tags 27 MiB
Commit Graph

505 Commits

Author SHA1 Message Date
kakou-fr 7a3cbc1e23
config: Example for MMU2S DIY (#2566) 
Configuration file for MMU2S DIY

Signed-off-by: Jeremy Briffaut <kakou@kakou.org>
 2020-03-01 22:08:37 -05:00
Denis Ignatenko f84542cd20
hall_filament_width_sensor: Added virtual runout sensor (#2535) 
Signed-off-by: Denis Ignatenko deniss979@gmail.com
 2020-03-01 22:05:12 -05:00
Angelol125 16e59511c3
config: Update printer-seemecnc-rostock-max-v2-2015.cfg (#2561) 
Update printer-seemecnc-rostock-max-v2-2015.cfg to include the [display] and [board_pins] sections needed for Reprap 20x4 LCD display (#2561).

Signed-off-by: Angelo Lagis <angelo_lagis@hotmail.com>
 2020-02-25 15:54:49 -05:00
FanDjango 16ecf15a91
bltouch: BTLOUCH V3.0/V3.1 Enable 5V/OD mode set commands (#2540) 
Signed-off-by: Mike Stiemke <fandjango@gmx.de>
 2020-02-23 22:32:07 -05:00
Kevin O'Connor 17f2b4e960 config: Fix minor typo in printer-lulzbot-taz6-2017.cfg 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-02-18 12:11:19 -05:00
Chris Lee 90500c331a config: Update TAZ6 configuration 
Support probing the corner washers for the bed tilt using G29,
flesh out the rest of the configuration for the display, and add
support for the Aerostruder (commented out by default).

Signed-Off-By: Chris Lee <clee@mg8.org>
 2020-02-18 12:10:09 -05:00
Matt Shirley 477b83469c
config: add mesh_min to printer-wanhao-duplicator-9-2018.cfg (#2525) 
This is a small change I forgot to make when copying my config to this template.

Signed-off-by: Matt Shirley <mdshw5@gmail.com>
 2020-02-17 20:59:08 -05:00
FanDjango 086c131bbf bltouch: Add support for stow_on_each_sample 
Signed-off-by: Mike Stiemke <fandjango@gmx.de>
 2020-02-15 17:58:56 -05:00
test3210-d 9a65a4569b hall_filament_width_sensor: Add new filament sensor 
Signed-off-by: Denis Ignatenko <deniss979@gmail.com>
 2020-02-14 13:14:34 -05:00
Kevin O'Connor 049d8c2a94 config: Update description of z_hop in safe_z_home 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-02-14 12:42:21 -05:00
Kevin O'Connor fd6baa3d16 config: Minor wording change to gcode_macro rename_existing description 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-02-13 21:52:00 -05:00
Matt Shirley b0b950b7e1
config: Add Wanhao Duplicator 9 MK1 (#2497) 
Also applies to the Monoprice Maker Pro MK1.
This config is based on the version from Chris Barnes (https://www.facebook.com/Jarannis)
found on https://pastebin.com/raw/wm8PQezy. This config was mostly working and I
only had to change a few things:

  - updated key names for min_point and max_point to mesh_min and mesh_max
  - enabled PID control
  - tweaked bounds to allow movement during mesh leveling
  - removed all comments
  - decreased homing speed slightly
  - sane bed mesh sample defaults

In response to Kevin O'Connor:

- remove pressure_advance setting from extruder section
- remove respond section
- remove pause_resume section

Signed-off-by: Matt Shirley <mdshw5@gmail.com>
 2020-02-13 20:52:31 -05:00
Kevin O'Connor 9818055ac3 gcode_macro: Support overriding of builtin g-code commands 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-02-12 20:42:03 -05:00
FanDjango 4d9a36b34f
homing: Ability to set retract speed between homing moves (#2487) 
On the retract move between homing moves, use a different speed (typically a faster one).

Signed-off-by: Mike Stiemke <fandjango@gmx.de>
 2020-02-12 10:09:39 -05:00
FanDjango cb042e749d
homing_heaters: Turn off heaters during homing/probing (#2486) 
Signed-off-by: Mike Stiemke <fandjango@gmx.de>
 2020-02-12 10:08:30 -05:00
Kevin O'Connor 2336d2d6ab config: Fix generic-fysetc-f6.cfg stepper_z cs_pin 
Reported by @jourjine

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-02-03 15:45:46 -05:00
Kevin O'Connor c36fe76d69 probe: Add support for configuring lift_speed 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-01-31 15:47:06 -05:00
Junliang Yan f29022499e config: Add Skr v1.4 configuration (#2423) 
Signed-off-by: John Yan <john.yan1019@gmail.com>
 2020-01-28 12:13:54 -05:00
mtw3d 2b3ea29f30 config: Add example printer-mtw-create-2015.cfg config file 
Signed-off-by: Mike Payson <mike@mtw3d.com>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-01-24 09:28:03 -05:00
Kevin O'Connor 6e020123c6 test: Add printer-monoprice-mini-delta-2017.cfg to printers.test 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-01-23 23:29:32 -05:00
Kevin O'Connor 196210cad2 config: Fix file permissions of generic-flyboard.cfg 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-01-23 22:25:42 -05:00
Kevin O'Connor 2ea3631222 delta: Add print_radius option to customize valid XY radius 
Add ability to override the default XY move checking radius.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-01-23 21:14:09 -05:00
Kevin O'Connor 8bf3e56301 config: Add example generic-flyboard.cfg config file 
Reported by @DJDOUBLEG.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-01-23 19:23:00 -05:00
Kevin O'Connor fc6d045ded config: Add example generic-archim2.cfg config 
Signed-off-by: Mike Payson <mike@mtw3d.com>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-01-23 18:32:52 -05:00
Kevin O'Connor 0160a7db9a config: Add an example generic-mks-sgenl.cfg config 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-01-23 18:07:34 -05:00
Kevin O'Connor ff0324b0c2 config: Add generic-mightyboard.cfg 
Reported by @fragginright.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-01-23 17:49:10 -05:00
chris-hammond dd77a2ec16 config: Adding a config file for the monoprice mini delta (#2392) 
A default config file for Monoprice Mini Delta printers.
Works when firmware is flashed via ST-Link V2 and when a
10A power supply is available. Lots of comments about wanting
to try pressure advance on the FB group, so I figured it was
a good time to get this added.

Signed-off-by: Chris Hammond <chammond@georgefox.edu>
 2020-01-14 10:33:38 -05:00
Arksine b562328bd0 config: add BME280 documentation 
Signed-off-by:  Eric Callahan <arksine.code@gmail.com>
 2020-01-13 22:29:50 -05:00
Hywelmartin b28df43b26 config: Fix thermistor association in generic-bigtreetech-skr-pro.cfg (#2390) 
Signed-off-by: Martin Malmqvist <hywelmartin@gmail.com>
 2020-01-13 18:23:03 -05:00
Arksine edae40c36f docs: Update documentation to reflect bed_mesh changes 
Also add new bed_mesh.md documentation.

Signed-off-by:  Eric Callahan <arksine.code@gmail.com>
 2020-01-09 14:14:13 -05:00
Arksine dc51788f9a test: update sample configs and test configs with new bed_mesh options 
Signed-off-by:  Eric Callahan <arksine.code@gmail.com>
 2020-01-09 14:14:13 -05:00
Kevin O'Connor 005cfea5c3 gcode: Fix detection of some "extended" g-code commands 
Fix typo that resulted in _get_extended_params() being called for all
commands.  Allow "extended" g-code commands to contain numbers.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-01-07 19:17:20 -05:00
Kevin O'Connor ac863a95b6 rotary_delta: Initial support for rotary delta kinematics 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-01-06 11:52:42 -05:00
Simo Apell 90bc1679a2 extruder_stepper: Initial support for synchronized extruder steppers 
Signed-off-by: Simo Apell <simo.apell@live.fi>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-01-06 11:03:05 -05:00
David Smith 6972b6303d docs: Updates for gcode_macro naming (#2317) 
Add note about numbers in macro names.  Add note about variable name case restriction. Add set variable example.

Signed-off-by: David O Smith <davidosmith@gmail.com>
 2020-01-06 10:59:40 -05:00
Tobias Weiß 61bcb6b47f config: Update generic-fysetc-s6.cfg (#2293) 
SPI communication with TMC drivers is possible with hardware SPI using the "spi1" bus.

Signed-off-by: Tobias Weiß <t.weiss@bk.ru>
 2019-12-18 15:54:56 -05:00
Kevin O'Connor 0a86190bae display: Revert "display: Add ST7567 display support (#1540)" 
This reverts commit 1b92af6078.

The standard "uc1701" lcd_type can now be used in place of the custom
"st7567" lcd_type.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-12-18 12:30:20 -05:00
Tobias Weiß 58abd2925e config: Fysetc S6 generic configuration (#2220) 
Signed-off-by: Tobias Weiß <t.weiss@bk.ru>
 2019-12-18 11:13:25 -05:00
Georgios Karnas 9c25f42f4a config: Flash instructions for printrboard (#2278) 
Signed-off-by: Georgios Karnas <kargeor@gmail.com>
 2019-12-17 10:03:57 -05:00
Kevin O'Connor 9628d9b1ac config: Minor wording change in example-extras.cfg 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-12-16 22:54:21 -05:00
Kevin O'Connor 7c81a16bd3 config: Update example-extras.cfg - extruder.activate_gcode was removed 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-12-16 21:27:55 -05:00
Kevin O'Connor ab5540bd34 config: Add printer-anet-a4-2018.cfg config file 
Reported by @Alkarasu.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-12-15 22:12:58 -05:00
Kevin O'Connor cff24b0220 config: Add multi extruder sample files 
Add sample-multi-extruder.cfg and sample-idex.cfg files.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-12-10 14:24:34 -05:00
Kevin O'Connor fcee27fc19 gcode: Remove builtin T0/T1/T2/... command support 
The builtin Tn command is not sufficiently flexible to control some
multi-extruder printers.  Remove the command and encourage users to
define individual gcode_macros for each Tn instance.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-12-10 14:24:32 -05:00
David Smith d1f4f18810 config: Add example for including a parameter in a macro call (#2251) 
Add description to default_parameter of g-code macro description of method to call macro with a non-default value.

Signed-off-by: David Smith <davidosmith@gmail.com>
 2019-12-10 14:01:41 -05:00
Kevin O'Connor 8f1753c8ce config: Update "Fysetc Mini 12864Panel" in sample-lcd.cfg 
Use the more standard "lcd_type: uc1701" and reverse the encoder pins.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-12-04 09:13:46 -05:00
Kevin O'Connor 8e296db410 test: Add printer-wanhao-duplicator-i3-mini-2017.cfg to build tests 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-12-03 13:34:46 -05:00
Puffy 3c526a71f9 config: Basic config for Wanhao Duplicator i3 mini (#2238) 
Signed-off-by: Grant Gordon <grant.gordon@imaginet.co.za>
 2019-12-03 13:32:43 -05:00
Kevin O'Connor 2d97e0e218 uc1701: Add support for rst_pin 
Add support for an optional uc1701 rst_pin.  Use the same reset pin
code handling with the SSD1306 code.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-12-02 10:25:30 -05:00
Jakub Kruszona-Zawadzki 41dd53f62c config: fixes in anycubic delta plus default config file (#2176) 
Signed-off-by: Jakub Kruszona-Zawadzki <acid@moosefs.com>
 2019-12-01 18:51:46 -05:00