3diy
/
klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
4,728 Commits 1 Branch 0 Tags 27 MiB
Commit Graph

991 Commits

Author SHA1 Message Date
dalegaard 9f8f3cd77d
fan: add enable_pin option (#5732) 
Signed-off-by: Lasse Dalegaard <dalegaard@gmail.com>
 2022-09-03 12:23:55 -04:00
jake-b ae6c16422f
mcp4018: Add SET_DIGIPOT command to mcp4018 implementation (#5737) 
Added a SET_DIGIPOT command to the mcp4018 implementation.
Previously the mcp4018 was read only, and set at the time of
configuration.  This allows you to change the value during a
print, which is needed for some older printers that need to
lower the stepper current during preheating.

Signed-off-by: Jake Bordens <jake@allaboutjake.com>
 2022-09-02 10:30:06 -04:00
Tircown 354915d2ad
kinematics: Add deltesian printers (#5743) 
Initial push of the working deltesian kinematics after some successful tests.

Signed-off-by: Fabrice GALLET <tircown@gmail.com>
 2022-09-01 15:56:31 -04:00
Dmitry Butyugin 5d9ff75d02 extruder_stepper: Support configuring pressure advance from config 
Also added status report for extruder_stepper objects with the
current pressure advance parameters values.

Signed-off-by: Dmitry Butyugin <dmbutyugin@google.com>
 2022-09-01 14:53:12 -04:00
Kevin O'Connor f7e29b276e docs: Update koconnor donation links 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-08-24 21:02:43 -04:00
Nitram 6a91824486
delta: Added the possibility to get where the "cone shape" of the build volume starts from Macros (#5662) 
Added the possibility to get where the "cone shape" of the build volume starts from Macros

Signed-off-by: Martin Malmqvist <Volcomosq@gmx.com>
 2022-08-19 13:27:44 -04:00
Kevin O'Connor dc012f8659 docs: Recommend allow-hotplug in CANBUS.md when using USB to canbus bridge 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-07-29 11:40:54 -04:00
Kevin O'Connor 2005d4dbf4 docs: Updates to CANBUS_protocol.md 
Update the document with latest details.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-07-29 11:40:54 -04:00
Pedro Lamas b725d971db bed_screws: report status 
Signed-off-by: Pedro Lamas <pedrolamas@gmail.com>
 2022-07-28 20:43:19 -04:00
Pedro Lamas c29e190696 docs: fixes typo on heater_bed 
Signed-off-by: Pedro Lamas <pedrolamas@gmail.com>
 2022-07-28 20:37:34 -04:00
Pedro Lamas 282d1113e4 manual_probe: report status 
Signed-off-by: Pedro Lamas <pedrolamas@gmail.com>
 2022-07-21 22:03:31 -04:00
Pedro Lamas 6be114d728 docs: fix rawparams example by truncating comments 
Signed-off-by: Pedro Lamas <pedrolamas@gmail.com>
 2022-07-19 12:48:16 -04:00
Kevin O'Connor d91939c4bf docs: Add BIGTREETECH to Sponsors.md file 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-07-16 23:17:30 -04:00
Kevin O'Connor 2f9fe49cb8 docs: Add a Sponsors.md file 
Add a documentation page with information on how to support Klipper.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-07-16 10:48:10 -04:00
Kevin O'Connor 06022b305f mkdocs-requirements: Force markdown==3.3.7 
A new release of markdown (v3.4.1) breaks the website deployment
scripts.  Force the existing version.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-07-16 10:43:53 -04:00
chestwood96 167736ad1c
respond: No forced spaces (#5152) 
Signed-off-by: Adrian Joachim <adi.joachim12@gmail.com>
 2022-06-30 13:56:35 -04:00
Kevin O'Connor 790ff4d8d7 usb_canbus: Initial support for USB to CAN bridge mode 
Support a USB interface that shows up as a canbus adapter to linux.
Route both local and real canbus packets over that interface.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-06-27 10:50:23 -04:00
Eric Callahan 6ad6e39ad2 docs: add SET_DISPLAY_TEXT documentation 
Signed-off-by:  Eric Callahan <arksine.code@gmail.com>
 2022-06-27 10:09:02 -04:00
Yifei Ding ae17b66a88
docs: remove FAQ ToC (#5585) 
Signed-off-by: Yifei Ding <yifeiding@protonmail.com>
 2022-06-27 09:58:48 -04:00
Kevin O'Connor 52a8afba43 docs: Note mcu types with i2c_speed support in Config_Reference.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-06-20 12:58:05 -04:00
Dmitry Butyugin 8804c1578d docs: Added instructions how to configure I2C for MPU-9250 
Signed-off-by: Dmitry Butyugin <dmbutyugin@google.com>
 2022-06-20 12:47:14 -04:00
Dmitry Butyugin f2e27ae05e docs: Updated accelerometer installation instructions for Python 3 
Signed-off-by: Dmitry Butyugin <dmbutyugin@google.com>
 2022-06-20 12:47:14 -04:00
Kevin O'Connor 98a24172e7 docs: Add mpu9250 to Config_Reference.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-06-20 12:41:24 -04:00
Kevin O'Connor 46842026b9 docs: Wrap lines in Measuring_Resonances.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-06-20 12:41:24 -04:00
Kurt Haenen f2a5800cea
configfile: Expose options awaiting to be saved (#5270) 
Adds a save_config_pending_items to the status reported by
configfile reflecting the items and values that a future
SAVE_CONFIG would actually persist.

Signed-off-by: Kurt Haenen <kurt.haenen@gmail.com>
 2022-06-20 12:10:57 -04:00
Kevin O'Connor 55d1c3728d docs: Note that i2c is not noise resilient in Config_Reference.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-06-16 18:38:31 -04:00
bluesforte f55b9d3e57 mpu9250: Adding support for MPU-9250 (and MPU-6050) accelerometer 
Add support for mpu9250 accelerometer over I2C bus.

Signed-off-by: Harry Beyel <harry3b9@gmail.com>
 2022-06-16 11:09:33 -04:00
Kevin O'Connor b9e195f098 flash_usb: Use hexid "2e8a:0003" for rp2040 already in bootloader mode 
Use a USB hex id to indicate that the device is already in bootloader
mode.  This makes the rp2040 flashing code similar to the other
boards.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-06-16 10:59:11 -04:00
Kevin O'Connor ea4f6d6a77 rp2040: Implement workaround for USB errata "rp2040-e5" 
The rp2040 USB may not connect after a reset.  Implementation the
recommended workaround.

Signed-off-by: Lasse Dalegaard <dalegaard@gmail.com>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-06-12 11:25:57 -04:00
Yifei Ding 9047702a00 mkdocs: Replace TOC in Translations 
Signed-off-by: Yifei Ding<yifeiding@protonmail.com>
 2022-06-03 19:14:13 -04:00
Stefan Dej 7c8cf7661b docs: fix typo in Exclude_Object.md 
Signed-off-by: Stefan Dej <meteyou@gmail.com>
 2022-06-03 18:11:35 -04:00
Frank Tackitt 638cd4d781 docs: add exclude_object documentation 
Also include sample macros to add M486 compatibility.

Signed-off-by: Franklyn Tackitt <git@frank.af>
Co-authored-by: Troy Jacobson <troy.d.jacobson@gmail.com>
 2022-06-03 14:12:04 -04:00
Pedro Lamas c16eab212e virtual_sdcard: Adds on_error_gcode 
Signed-off-by: Pedro Lamas <pedrolamas@gmail.com>
 2022-06-03 11:26:34 -04:00
Mikkel Schmidt af38d708cb
adxl345: Support recording data from multiple ADXL345's in one run, and more. (#5224) 
Add PROBE and CHIP to TEST_RESONANCES

Since it's possible to specify more than one chip
in TEST_RESONANCES the CHIP parameter has been
renamed to CHIPS

Signed-off-by: Mikkel Schmidt <mikkel.schmidt@gmail.com>
 2022-05-23 19:56:58 -04:00
Kevin O'Connor c7e0372c5d docs: Line wrapping in G-Codes.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-05-23 15:50:43 -04:00
Kevin Nguyen 3081899883
docs: Documentation on screws_tilt_calculate MAX_DEVIATION parameter (#5522) 
Signed-off-by: Kevin Nguyen <ngynkvn@gmail.com>
 2022-05-23 15:49:59 -04:00
camerony f1c6f76a51
docs: Update Config_Reference.md z_hop speed (#5514) 
The default z-hop speed is actually 15 mm/s according to the code in safe_z_home.py

Signed-off-by: Cameron River <camerony@gmail.com>
 2022-05-23 15:05:53 -04:00
th33xitus bbb06a014b docs: fix links to Config_Reference.md 
Signed-off-by: Dominik Willner <th33xitus@gmail.com>
 2022-05-18 12:05:28 -04:00
Kevin O'Connor 1c18265a62 docs: Minor wording update to Code_Overview.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-05-17 11:55:17 -04:00
Kevin O'Connor e8dc44a0ca docs: Update Code_Overview.md with more realistic task timing guidelines 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-05-17 11:46:38 -04:00
Kevin O'Connor 95676343db docs: Updates to Installation.md document 
Recommend users obtain an example config file prior to starting the
installation.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-05-17 11:36:36 -04:00
Kevin O'Connor be4b8b17f2 docs: Minor CanBoot documentation fixes 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-05-10 11:55:06 -04:00
Eric Callahan 95d06c95e3 docs: add CanBoot documentation to bootloaders.md 
Signed-off-by:  Eric Callahan <arksine.code@gmail.com>
 2022-05-10 11:48:06 -04:00
3-5-20 b44eee609a
docs: Update G-Codes.md (#5487) 
Typo correction: my -> by

Signed-off-by: Oscar Cetnarowski <0.007954545@proton.me>
 2022-05-09 22:20:06 -04:00
Kevin O'Connor 661f5b08c8 docs: Fix typo in Benchmarks.md 
Reported by @kaidegit.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-05-06 14:54:50 -04:00
Kevin O'Connor c4232bea2e docs: Note pins used for stm32flash in Bootloaders.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-05-04 13:54:42 -04:00
Kevin O'Connor 722ad4a1d2 docs: Update Example_Configs.md to note that baud should be 250000 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-04-30 14:51:14 -04:00
Kevin O'Connor e43fd4fab0 docs: Note to run DELTA_CALIBRATE before DELTA_ANALYZE in Delta_Calibrate.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-04-29 13:58:05 -04:00
Kevin O'Connor 1eb6afdbe5 docs: List only micro-controller names in benchmarks table in Features.md 
There is concern that some users are interpreting the benchmark table
in Features.md as a list of "supported boards" or possibly
"recommended boards".  This was not the intent.

Remove the board names from the list to make it more clear the intent
is only to describe the benchmarks.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-04-29 12:20:41 -04:00
Kevin O'Connor 07a90902a5 docs: Improve wording of screws_tilt_adjust in Config_Reference.md 
Reported by @JamesH1978.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-04-23 21:22:02 -04:00