1eb6afdbe5
docs: List only micro-controller names in benchmarks table in Features.md
...
There is concern that some users are interpreting the benchmark table
in Features.md as a list of "supported boards" or possibly
"recommended boards". This was not the intent.
Remove the board names from the list to make it more clear the intent
is only to describe the benchmarks.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-04-29 12:20:41 -04:00
d9daeb0803
config: Pull up endstop_pins on Fysetc S6/Spider
...
Signed-off-by: Adrian Keet <arkeet@gmail.com>
2022-04-26 20:53:14 -04:00
542486fba7
stm32: Add 64kib bootloader offset option to STM32F401 ( #5457 )
...
This is needed for the Creality Ender 3 S1 with the STM32F401 chips to enable a 64kib bootloader offset
Signed-off-by: James Hartley <james@hartleyns.com>
2022-04-25 12:07:48 -04:00
dc28257a75
spi_flash: reduce speed to 400K
...
Signed-off-by: Eric Callahan <arksine.code@gmail.com>
2022-04-25 12:02:45 -04:00
ccae1e3ec8
spi_flash: validate mcu configuration
...
Prior to attempting a flash, verify that the MCU is successfully
configured.
Signed-off-by: Eric Callahan <arksine.code@gmail.com>
2022-04-25 12:02:45 -04:00
5517a856cc
motan: Fix typo in error report
...
Reported by @Ludy87.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-04-23 21:50:27 -04:00
de14d106a1
shaper_calibrate: Add missing import
...
Reported by @Ludy87.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-04-23 21:49:50 -04:00
a829a4c93f
printer-creality-ender3pro-2020: Update info on chip types ( #5445 )
...
Added flash info that some Ender 3 Pro's shipped in 2022 have the GD32F103 chip
Signed-off-by: James Hartley <james@hartleyns.com>
2022-04-23 21:25:07 -04:00
07a90902a5
docs: Improve wording of screws_tilt_adjust in Config_Reference.md
...
Reported by @JamesH1978.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-04-23 21:22:02 -04:00
a10b2805de
config: Fix incorrect pin in printer-monoprice-select-mini-v2-2018.cfg
...
Reported by @bkw777.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-04-23 21:16:09 -04:00
7db07c46e6
spi_flash: support spi protocol changes
...
Signed-off-by: Eric Callahan <arksine.code@gmail.com>
2022-04-22 20:46:45 -04:00
7793784640
spicmds: Allow inversion of CS pin for SPI busses
...
Signed-off-by: Martin Hierholzer <martin@hierholzer.info>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-04-22 13:25:03 -04:00
a02da85101
docs: Fix typo in query_adc section of G-Codes.md
...
Reported by @jakep82.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-04-21 19:20:46 -04:00
fb3bae4531
neopixel: Simplify color_order parsing
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-04-18 12:55:32 -04:00
260fd7d367
pca9632: Fix color_order assignment
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-04-18 11:07:05 -04:00
fb02e2b577
neopixel: Fix color_order assignment
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-04-18 10:55:35 -04:00
5f0885958d
neopixel: Support chains with a mix of color_order
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-04-18 10:16:10 -04:00
53a7f1dd76
led: Remove has_white check from LEDHelper
...
There is no harm in checking for a white config setting.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-04-18 09:34:25 -04:00
630d3b3444
led: Fix SET_LED TRANSMIT=1 handling
...
If the final update in a series of SET_LED update commands didn't
alter a color than the transmit would not occur - even if prior
commands did make color changes. Refactor the update code and fix.
Reported by @mstansberry.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-04-18 08:55:21 -04:00
44567879f6
stm32: Add STM32F072 16KiB bootloader option ( #5404 )
...
Signed-off-by: Alexander Stöpperger <a.stoepperger@gmx-topmail.de>
2022-04-13 11:22:04 -04:00
4c8d1b813c
config: Updated and created new TwoTrees configs to avoid confusion ( #5365 )
...
* Update and rename printer-twotrees-sapphire-pro-2020.cfg to printer-twotrees-sapphire-pro-sp-3.cfg
I renamed the file since the printer name now changed and is sold with this name, there is only one version so year can be removed.
-Added detailed instructions for flashing in the header.
-Corrected rotation distances for axes, it was wrong.
-Added gear ratio for extruder that is useful for future changes.
-Added heater fan to HE1 pins for automatic shutdown with temp.
-Reduced speed and accel for Z since a 2mm screw is used.
* Create printer-twotrees-sapphire-plus-sp-5-v1.1.cfg
I created the file since the printer name now changed and is sold with this name, there are 2 main versions (V1 and V1.1) so I will make 2 different configs for them since there are some hardware change and people are confused in what to change.
The difference with V1 is that all 2225 drivers are now used, since microsteps tables change for these drivers and by factory all jumpers are in the microstep setting is 32, people don't know this and will have half movement with the v1 config, there is a lot of confusion in communities so I think adding another file is the best option.
Signed-off-by: Lorenzo Cascone <laurienzudesign@gmail.com>
2022-04-13 11:07:13 -04:00
4a8a76ead8
docs: Update temperature_fan PID documentation in Config_Reference.md
...
Reported by @dewi-ny-je.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-04-11 11:46:24 -04:00
38e82e8d8f
stm32: Add support for additional i2c buses
...
Reported by @StoneColdCrazy.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-04-11 10:58:34 -04:00
5d82be2f5d
docs: Add link to linux mcu neopixels config docs ( #5402 )
...
The reference to the linux mcu was helpful to understand what a linux mcu was but didn't help with understanding the technical reasons why it's not supported.
Signed-off-by: Karl Bowden <karl@bearded.sexy>
2022-04-11 10:35:38 -04:00
240f8ea60b
htu21d: SI7021 is has id 0x15 ( #5375 )
...
This is most probably the result of a copy paste error. All vendor documentation for SI7021 (e.g. https://www.silabs.com/documents/public/data-sheets/Si7021-A20.pdf ) points to 21 and it actually only works when adapted to 0x15 (=21).
Signed-off-by: Uli Wolf <github+klipper@wolf-u.li>
2022-04-11 10:33:41 -04:00
4d4c8d8f94
docs: Add link to Moonraker in API_Server.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-04-09 19:32:38 -04:00
6e61e47a23
docs: Fix smarteffector link in G-Codes.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-04-09 19:13:30 -04:00
05330fd3e5
docs: Minor updates to SmartEffector docs
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-04-09 19:10:16 -04:00
2060a6908f
smart_effector: Config and command reference
...
Signed-off-by: Dmitry Butyugin <dmbutyugin@google.com>
2022-04-09 19:04:57 -04:00
76b22b3125
smart_effector: Initial support of programmable SmartEffector
...
Signed-off-by: Dmitry Butyugin <dmbutyugin@google.com>
2022-04-09 19:04:57 -04:00
f3b995227a
docster: Fix incorrect default value for max_freq
2022-04-09 16:31:23 -04:00
7c5b7191c3
docs: Update wording of "quality improvement" section of CONTRIBUTING.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-04-08 09:56:22 -04:00
5a409d5d31
docs: Provide more information on PID in Config_Reference.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-04-07 12:30:02 -04:00
22297229b7
temperature_fan: Fix divide by zero error when pid_Ki is zero
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-04-07 12:11:54 -04:00
647a1cd8ca
temperature_fan: Remove deprecated pid_integral_max option
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-04-07 12:10:48 -04:00
40c2d11ef8
config: Add config for CR-10 Smart Pro, including installation instructions ( #5396 )
...
The pinout was found by windowpainting, initial config by Subwooferbone, tweaked by iblue.
Signed-off-by: Markus Fenske <iblue@gmx.net>
2022-04-07 11:59:04 -04:00
555ac58a3f
pca9632: Add support for configurable color_order
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-04-07 11:48:25 -04:00
f0700c0985
pca9632: Support using hardware I2C
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-04-07 11:43:52 -04:00
61792e3e31
_klipper3d: Specify mkdocs language config options
...
Signed-off-by: Yifei Ding <yifeiding@protonmail.com>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-04-06 19:04:48 -04:00
b35b6cb10b
_klipper3d: New language translation deployment
...
Signed-off-by: Yifei Ding <yifeiding@protonmail.com>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-04-06 19:04:48 -04:00
444d209cce
_klipper3d: Remove translation stubs
...
Support for language translations on the klipper3d.org site was
disabled in commit c067d4df
2022-04-06 19:04:48 -04:00
dc7b02f329
neopixel: Support arbitrary RGBW strings in color_order config
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-04-06 09:27:36 -04:00
92de6e91dc
docs: Note that "minutes" in screws_tilt_adjust means minutes of a clock face
...
Reported by @kubik369 and @Sineos.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-04-05 20:35:56 -04:00
b1ae50cfc7
test: Add an led test for led, neopixel, dotstar, pca9533, pca9632 configs
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-03-31 13:08:12 -04:00
e6bfc4c9aa
led: Support setting display_template parameters via SET_LED_TEMPLATE
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-03-31 13:08:12 -04:00
1ab3ac39e4
led: Support automated LED updates based on display_template results
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-03-31 13:08:12 -04:00
a6ab56c0a6
display: Add a new PrinterDisplayTemplate class for tracking template macros
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-03-31 13:08:12 -04:00
35ff49e546
docs: Note that neopixel doesn't work on "linux mcu"
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-03-31 13:08:12 -04:00
a7f69caa37
docs: Note change to neopixel/dotstar API status fields
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-03-31 13:08:12 -04:00
2001eecd5e
pca9533: Add support for 4 brightness levels
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-03-31 13:08:12 -04:00
Kevin O'Connor