62fc5dc288
samd21: Add support for entering Arduino bootloader via USB
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-12-24 11:43:11 -05:00
b84ecebf8f
usb_cdc: Add support for detecting a USB level Arduino bootloader request
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-12-24 11:42:19 -05:00
c6065e29a6
mcu: Allow set_stepper_kinematics() to set the kinematics back to None
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-12-24 11:42:13 -05:00
5dc74f3152
winch: Add experimental support for cable winch kinematics
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-12-24 11:38:59 -05:00
ec9cb3a1b3
polar: Experimental support for polar kinematics
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-12-24 11:38:59 -05:00
7e3e02a17a
kinematics: Add a "none" debugging kinematics
...
Add a dummy kinematics class for development testing.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-12-24 11:38:59 -05:00
50e9c6738f
scripts: Add a test case for Ubuntu 18.04 compiler error
...
Attempt to detect a bad build of Klipper and report an error.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-12-22 13:13:31 -05:00
2a74ffdb95
samd21: Add support for ADC
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-12-22 10:58:04 -05:00
d7b0a7e961
docs: Add a FAQ item on how to cancel a "wait for temperature" request
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-12-20 16:25:58 -05:00
566488dc01
docs: Add a FAQ item on Raspberry Pi reboots
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-12-20 16:25:58 -05:00
a5cb74d58d
config: Add a generic-minitronics1.cfg example config file
...
Information provided by @BKLronin.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-12-20 11:09:20 -05:00
e4dac1039d
docs: Update release notes for v0.7.0 release
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-12-20 09:15:24 -05:00
269305fa23
test: Add printer-creality-cr20-2018.cfg to printers.test
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-12-19 20:51:58 -05:00
e820ea3141
config: Add printer-micromake-d1-2016.cfg example config file
...
Reported by IRC user "Xantos".
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-12-18 20:59:43 -05:00
531575651c
bltouch: Document that bltouch "clones" may not work correctly
...
There is concern that the bltouch.py module may not perform adequately
on some bltouch "clones". Document that.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-12-18 17:12:44 -05:00
d0f09727a9
bltouch: Issue both a "reset" and a "pin_up" after a successful probe
...
Not all BLTouch clones raise the pin on a "reset" request, so
explicitly send a "pin_up" command.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-12-16 11:06:46 -05:00
ccc25a03d5
bltouch: Add a config option to disable the bltouch sensor test
...
It appears some bltouch "clones" do not report the probe as triggered
when put in "touch mode" while the pin is raised. Add a config option
to allow users to disable the test.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-12-16 11:06:41 -05:00
ce064e6e2d
bltouch: Always make sure to check the endstop at least every 1ms
...
Some of the bltouch implementations may only respond to a probe event
with a 5ms pulse. Make sure to check the signal pin at least every
millisecond to ensure no signal is lost.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-12-16 11:06:27 -05:00
79d65d8ead
config: Fix CR-20 click pin polarity
...
Signed-off-by: Uri Shaked <uri@urishaked.com>
2018-12-15 18:38:03 -05:00
cc4227aec8
config: Add printer config for the CR-20 by Creality3D
...
Signed-off-by: Uri Shaked <uri@urishaked.com>
2018-12-15 17:42:23 -05:00
f100d75c19
stm32f1: Always read SPI receive buffer
...
Otherwise the first byte read via SPI may be the last byte
of the previous transfer
Signed-off-by: Yannic Schroeder <schroeder@ibr.cs.tu-bs.de>
2018-12-14 12:25:35 -05:00
ef4f84e3ae
config: Update printer-creality-ender3-2018.cfg ( #959 )
...
Added options necessary for basic extruder calibration expected of a new install. Fixed bed size to correct 235x235. Removed 0.5 position_endstop setting as this crashes hot end into the bed on stock Ender 3's.
Signed-off-by: Troy nadeau <troyboy162@hotmail.com>
2018-12-05 16:43:14 -05:00
76b57ba05a
bltouch: Fix typo in pin_move_time parsing
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-12-04 11:43:04 -05:00
44aa5def73
bltouch: Allow the pin_move_time to be configured
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-12-04 10:34:54 -05:00
e0b2d7c51d
bltouch: Add a BLTOUCH_DEBUG command
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-12-03 22:52:32 -05:00
aac92ffb91
bltouch: Fix bug - must restore stepper position after homing
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-12-01 22:09:06 -05:00
6df7356baa
samd21: Fix gpio in support
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-11-30 23:10:23 -05:00
e505ab0df1
samd21: Add support for flashing an application via the bossac tool
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-11-30 22:22:42 -05:00
f2179da8ad
samd21: Add support for hardware pwm
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-11-30 20:00:59 -05:00
0fd2dd7c11
samd21: Minor simplification to timer init code
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-11-30 11:50:50 -05:00
d6f3f6b664
samd21: Add support for SPI
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-11-30 11:50:50 -05:00
58d61c7887
samd21: Add support for basic i2c support (write only)
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-11-30 11:50:50 -05:00
6d90ebe6f8
samd21: Use GPIO() macro when calling gpio_peripheral()
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-11-30 11:50:50 -05:00
0af0bc946e
samd21: Enable watchdog
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-11-30 11:50:50 -05:00
afa58de014
samd21: Try to clarify the "generic clock generator" configuration
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-11-30 11:50:50 -05:00
3a47d972db
i2ccmds: Validate the i2c address
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-11-30 11:50:50 -05:00
db4f0c24cd
spicmds: Check for an incorrect mode in spicmds.c
...
Check the mode parameter in spicmds.c so that the mcu code does not
need to check it.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-11-30 11:50:48 -05:00
6b108aa885
stm32f1: Move ADC and SPI code from gpio.c to spi.c and adc.c
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-11-30 11:42:54 -05:00
581b1439f3
config: Update bed_mesh in example-extras.cfg
...
Update documentation about the fade options. Also inform the user that it is recommended to home toward the center of the print area when using a probe for z homing.
Signed-off-by: Eric Callahan <arksine.code@gmail.com>
2018-11-30 11:37:21 -05:00
cf6a56cebf
bed_mesh: Introduce fade_target option
...
To deal potential z scaling when fade is enabled, a fade_target option has been introduced. This option may either be set to 0.0 or any z position within the range of the mesh. A value of 0.0 will result in previous behavior, where z adjustment phases out until no further adjustment is added. A non-zero value will phase out adjustment until the target has been reached, after which the rest of the print will be offset along the z axis by the fade_target. By default the fade_target will be calculated as an average of the mesh.
Signed-off-by: Eric Callahan <arksine.code@gmail.com>
2018-11-30 11:37:21 -05:00
35f41b7402
bed_mesh: Disable z-adjustment fade by default.
...
Due to various potential issues with fading out z-adjustment, it is better to disable by default and allow users to opt-in.
Signed-off-by: Eric Callahan <arksine.code@gmail.com>
2018-11-30 11:37:21 -05:00
824e55d75a
bltouch: Add initial support for a bltouch "extras" module
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-11-30 11:34:20 -05:00
f01ced8ed4
config: Rework sample-bltouch.cfg into sample-probe-as-z-endstop.cfg
...
The example configuration information is more useful for general probe
as z_endstop than as a bltouch example.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-11-30 11:34:20 -05:00
7699304f9b
graphstats: Change stats filter to use print_time instead of bytes_write=0
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-11-26 17:37:04 -05:00
b8f92c73ed
config: Make the Anycubic delta configurations as similar as possible
...
Signed-off-by: Peter Ruevski <dpr@ruevs.com>
2018-11-25 17:14:16 -05:00
a726c58671
mcp4451: Minor update - remove unnecessary mcu import
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-11-24 00:36:49 -05:00
147d805231
mcp4451: Use bus.py helper code for i2c
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-11-24 00:33:22 -05:00
729a2e8306
avr: Add support for sending I2C messages
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-11-23 23:49:26 -05:00
e5150fe187
uc1701: Add support for SSD1306 in i2c mode
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-11-23 22:04:06 -05:00
043170265b
i2ccmds: Minor whitespace changes
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-11-23 21:36:44 -05:00
Kevin O'Connor