Remove support for changing the cycle time of pwm pins from the
output_pin module. Use a new pwm_cycle_time module that supports
setting dynamic cycle times. This simplifies the output_pin code and
low-level pin update code.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Creality released the Ender 5 S1 model in November of 2022. It
has enough hardware differences from the previous models that
that the existing Ender 5 configs are not compatible. This
configuration is based on one provided by Creality that was then
tweaked and modified. I have been using these values (plus some
additional entries) for about 6 months with no issues.
Signed-off-by: Brian Greenberg <grnbrg@grnbrg.org>
The output_pin module is only capable of updating an output pin at
most once every 100ms. Add a new pwm_tool module that is capable of
queuing updates in the micro-controller and thus allowing for much
higher update rates.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
New configuration for the Sovol SV06 Plus
Initial pass at adding a printer configuration for the Sovol SV06
Plus based on the existing Sovol SV06 config. Updated for the larger
build volume, added filament runout sensor, and removed any references
to the LCD screen since the stock screen doesn't work with Klipper.
Signed-off-by: Herb McNew <herb.mcnew@gmail.com>
Use two different files for the Octopus Pro and Octopus (non-Pro).
The configs are the same in practice, but the difference in version
and naming can lead to confusion.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
PR to add the newer version of the Ender 2 Pro with the CR-FDM-v2.5.54.170 motherboard with the HC3232F460 chip.
Confirmed as working with discord member NyftHeart and using configs from Steve Gotthardt, with his permission to use and submit.
Signed-off-by: James Hartley <james@hartleyns.com>
Created a base config for the Creality CR10s Pro v2 as described here: https://www.creality.com/products/cr-10s-pro-v2-3d-printer
This will allow users with this printer to more easily setup Klipper firmware.
Signed-off-by: Peter Kydas <peter@kydas.me>
Add a new HAVE_LIMITED_CODE_SIZE symbol that enables a menu to select
optional features. This symbol is enabled on chips with small build
sizes.
Replace the HAVE_GPIO_BITBANGING with four new symbols:
WANT_GPIO_BITBANGING, WANT_DISPLAYS, WANT_SENSORS, WANT_SOFTWARE_SPI,
and WANT_SOFTWARE_I2C. This allows users a little more flexibility
when selecting features they need.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
New printer : Longer LK4X configuration
This configuration is based on the one provided by Longer with some tweaks.
Signed-off-by: Thomas Lété <bistory@gmail.com>
This adds support for the stock configuration of the V-Minion printer from Ratrig, based on the Octopus v1.1 (STM32F446)
Signed-off-by: Benjamin Lesher <bbro44@protonmail.com>
Add the default base config for the Ender 3 v2 Neo (as released 2022).
This config also works with the newer D32F303 based 4.2.2 boards.
Signed-off-by: Sam McLeod <sammcj@users.noreply.github.com>
The actual board name is EZBoard V2 without the lite. Renaming the file and correcting the intro text to reflect the actual board name.
Signed-off-by: Anthony Dellett <anthony.dellett@gmail.com>
Config file contains pin mappings to suit Lulzbot Mini 2 using Lulzbot SingleExtruder(0.5mm) and Lulzbot flexible magnetic bed.
Mini 2 uses Einsy Retro mainboard.
Signed-off-by: Trent Sheather <trent.sheather@gmail.com>
add G17, G18 and G19 commands to select arc planes
enhance G2/G3 to support arc moves in XY, XZ and YZ planes
Signed-off-by: Andrew Mirsky <andrew@mirsky.net>
Works for unmodified stock Artillery Sidewinder X2,
year 2022 with Artillery Ruby v1.2 mainboard.
All by default connected things are working fine.
Build firmware with architecture STM32F401 with "No bootloader".
Other settings keep ther defaults
Signed-off-by: Frank Roth <developer@freakydu.de>
This is a working config with full LCD and stepper settings (only thing missing is the kill switch, which did not appear to work)
Signed-off-by: Rui Carmo <rui.carmo@gmail.com>
Kevin O'Connor