This adds a command which allows an external script to broadcast a
bootloader request, using a supplied UUID to match the request.
Included is a method to process requests to enter the canboot
bootloader.
Signed-off-by: Eric Callahan <arksine.code@gmail.com>
Make sure whitespace isn't in the pin description. Also make sure an
alias doesn't map to an invalid pin.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Minor indentation and variable name changes.
Don't remove linebreaks from message_protocol_error lines.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
The MCU protocol error message often confuses users, especially after getting bombarded with the config format error line. This PR tries to improve it and has the following goals:
- Put the technical error at the end to prevent confusion and avoid the immediate jump to help channels instead of continuing to read
- Inform the user first what the type of error is (In this case: MCU Protocol error) and not at the end of the long error message
- Give the users a clear instruction what to do (pretty much unchanged), but possibly more approachable because the user is not confused by the technical error anymore
- Shows the version numbers of Klipper separate from all MCU version numbers so that it is more obvious that this is the version of Klipper
- Separates the version numbers between outdated MCUs and up-to-date MCUs, so that it becomes obvious if a MCU flash failed because the MCU doesn't disappear from the outdated list
- Previously, when viewing the errors in a web frontend, additional line breaks made it extremely hard to read the message, sometimes with as little as one word on one line. The error messages are now formatted to not have rogue line breaks, improving readability.
Signed-off-by: Felicia Alexa Hummel <felicia@drachenkatze.org>
There is concern that some users are interpreting the benchmark table
in Features.md as a list of "supported boards" or possibly
"recommended boards". This was not the intent.
Remove the board names from the list to make it more clear the intent
is only to describe the benchmarks.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
This is needed for the Creality Ender 3 S1 with the STM32F401 chips to enable a 64kib bootloader offset
Signed-off-by: James Hartley <james@hartleyns.com>
If the final update in a series of SET_LED update commands didn't
alter a color than the transmit would not occur - even if prior
commands did make color changes. Refactor the update code and fix.
Reported by @mstansberry.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
* Update and rename printer-twotrees-sapphire-pro-2020.cfg to printer-twotrees-sapphire-pro-sp-3.cfg
I renamed the file since the printer name now changed and is sold with this name, there is only one version so year can be removed.
-Added detailed instructions for flashing in the header.
-Corrected rotation distances for axes, it was wrong.
-Added gear ratio for extruder that is useful for future changes.
-Added heater fan to HE1 pins for automatic shutdown with temp.
-Reduced speed and accel for Z since a 2mm screw is used.
* Create printer-twotrees-sapphire-plus-sp-5-v1.1.cfg
I created the file since the printer name now changed and is sold with this name, there are 2 main versions (V1 and V1.1) so I will make 2 different configs for them since there are some hardware change and people are confused in what to change.
The difference with V1 is that all 2225 drivers are now used, since microsteps tables change for these drivers and by factory all jumpers are in the microstep setting is 32, people don't know this and will have half movement with the v1 config, there is a lot of confusion in communities so I think adding another file is the best option.
Signed-off-by: Lorenzo Cascone <laurienzudesign@gmail.com>
The reference to the linux mcu was helpful to understand what a linux mcu was but didn't help with understanding the technical reasons why it's not supported.
Signed-off-by: Karl Bowden <karl@bearded.sexy>
This is most probably the result of a copy paste error. All vendor documentation for SI7021 (e.g. https://www.silabs.com/documents/public/data-sheets/Si7021-A20.pdf) points to 21 and it actually only works when adapted to 0x15 (=21).
Signed-off-by: Uli Wolf <github+klipper@wolf-u.li>
Eric Callahan