3diy
/
klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
3,083 Commits 1 Branch 0 Tags 27 MiB
Commit Graph

44 Commits

Author SHA1 Message Date
Kevin O'Connor 7912c39f9e docs: Add a "why does klipper report errors" section to FAQ 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-06-05 17:04:02 -04:00
Kevin O'Connor 3c01b60a88 docs: Update FAQ with TMC2208 "standalone" mode workaround 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-03-29 11:08:49 -04:00
Kevin O'Connor 5ff45636d9 docs: Minor FAQ updates 
Fix rendering of Patreon URL in FAQ.  Use same "ls" command to find
the serial port that Installation.md uses.  Note Raspberry Pi 4 is
supported.  Note problems with ModemManager.  Point to Bed_Level.md in
Z position_endstop question.  Link to Config_checks.md in "Z
screaching" FAQ.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-01-06 10:45:48 -05:00
Kevin O'Connor 8663bc8192 docs: Update FAQ to emphasize checking Config_Changes.md on an upgrade 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-12-10 13:51:47 -05:00
Kevin O'Connor 205da598fd docs: Move upgrade instructions to the last item in the FAQ 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-12-10 13:39:49 -05:00
Kevin O'Connor 3665e9fc53 docs: Recommend safe_z_home over homing_override 
Update BLTouch.md, FAQ.md, and sample-probe-as-z-endstop.cfg to
recommend using a safe_z_home config section over a homing_override
config section.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-11-07 16:50:52 -05:00
Kevin O'Connor 197030c684 docs: Update FAQ to reference Bootloaders.md on "make flash" failure 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-07-22 10:07:34 -04:00
Kevin O'Connor fd1dff3f02 docs: Fix numbering in FAQ 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-05-08 16:48:14 -04:00
Kevin O'Connor 73fd292637 docs: Update "avr restart=command" FAQ to point to bootloaders.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-05-07 23:02:20 -04:00
Kevin O'Connor 8bc9f39c58 docs: Avoid using .. in markdown links 
Using .. in the markdown link can confuse some document processors.
Use an absolute link to github instead.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-04-14 21:12:21 -04:00
Kevin O'Connor 328bd89fc1 docs: Warn against using the TMC2208 in standalone mode 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-20 16:22:06 -05:00
christian mock 82efed5e2a docs: added an answer to the FAQ about detecting lost steps (#1265) 
Signed-off-by: christian mock <cm@tahina.priv.at>
 2019-02-17 22:35:58 -05:00
Kevin O'Connor 5b9ce328e5 docs: Clarify FAQ item on running multiple instances of klippy 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-03 17:41:57 -05:00
Kevin O'Connor 90827a88de docs: Minor wording change to step_distance FAQ 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-01-27 16:52:16 -05:00
Kevin O'Connor 71ef715a88 docs: Expand FAQ on why step_distance is used 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-01-27 11:29:42 -05:00
Kevin O'Connor 76138fde5c docs: Add a FAQ item for "Do I have to use OctoPrint?" 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-01-21 12:01:24 -05:00
Kevin O'Connor f2f54290e8 docs: Add a new Config_Changes.md document 
Add a document to track non-backwards compatible changes to the
printer config file.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-01-07 20:00:44 -05:00
Kevin O'Connor c8e04274ad docs: Add a FAQ item for "multiple instances of klipper on the same machine" 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-01-07 13:59:52 -05:00
Kevin O'Connor 28e68075c8 docs: Suggest checking for bad wires in "lost communications" faq entry 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-01-07 10:28:25 -05:00
Kevin O'Connor 186d815469 docs: Documentation/FAQ, Raspii voltage 
Add note that `under power` may be related to communication issues.

Signed-off-by: Wilfried Goesgens <dothebart@citadel.org>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-01-05 20:59:12 -05:00
Kevin O'Connor d7b0a7e961 docs: Add a FAQ item on how to cancel a "wait for temperature" request 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-12-20 16:25:58 -05:00
Kevin O'Connor 566488dc01 docs: Add a FAQ item on Raspberry Pi reboots 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-12-20 16:25:58 -05:00
Kevin O'Connor 097e6c524b docs: Fix link in FAQ document 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-11-13 14:40:35 -05:00
Kevin O'Connor 5f9ce32fae docs: Be more clear that a baud of 250000 is recommended 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-11-13 14:06:27 -05:00
Kevin O'Connor 1e07be4db4 docs: Add a "Lost communication with MCU" section to the FAQ 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-10-09 11:22:28 -04:00
Kevin O'Connor 96acfdc6d2 docs: Minor rewording of Marlin pin number section of FAQ 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-08-26 23:06:32 -04:00
Kevin O'Connor a27e82aef3 docs: Add a section to the FAQ on translating Marlin pin numbers 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-08-24 21:43:53 -04:00
Kevin O'Connor f2d232ef77 force_move: Provide defaults for SET_KINEMATIC_POSITION parameters 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-08-02 08:58:18 -04:00
Kevin O'Connor 0025fbf10d toolhead: Replace junction_deviation with square_corner_velocity 
The junction_deviation configuration parameter has a number of quirks
that make it difficult to configure.  Replace it with a
"square_corner_velocity" configuration parameter.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-07-16 10:32:43 -04:00
Kevin O'Connor 2c4ca88887 docs: Update documentation to note use of /dev/serial/by-path/ 
When using multiple micro-controllers it may be necessary to use an id
from /dev/serial/by-path/ instead of /dev/serial/by-id/.  Also,
emphasize that in config/example-multi-mcu.cfg.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-06-01 17:22:03 -04:00
Kevin O'Connor 42ca985bef docs: Add reference to homing_override in FAQ 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-05-20 19:33:54 -04:00
Kevin O'Connor cd9e21e3aa FAQ: Add item on TMC2208 being disabled in the middle of a print 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-05-05 13:06:55 -04:00
Kevin O'Connor 22c49a7c3f docs: Improve FAQ update software entry (use make menuconfig ; make clean) 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-04-25 10:29:55 -04:00
Kevin O'Connor 832c0bc017 docs: Add more hints to use /dev/by-id/ for the serial device 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-04-20 11:57:49 -04:00
Kevin O'Connor c539fed8bb docs: Add additional information to FAQ on heater checks 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-04-09 22:00:26 -04:00
Kevin O'Connor 039bb9f10f docs: Add Patreon link to FAQ page 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-03-31 13:55:41 -04:00
Kevin O'Connor ef820d98f6 docs: Add "will heaters be turned off on a crash" item to FAQ 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-03-13 11:36:45 -04:00
Kevin O'Connor 82a65e9f4a docs: Note the use of the virtual_sdcard feature 
Note that virtual_sdcard helps on slower machines.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-03-02 11:28:01 -05:00
Kevin O'Connor 054cbbe094 docs: Add a FAQ item on steps to upgrade the software 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-01-12 18:38:49 -05:00
Kevin O'Connor 83e9e92b9a docs: Add a table of contents to the FAQ 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-01-05 11:42:00 -05:00
Kevin O'Connor 29c83cec22 docs: Update installation document with pointers to FAQ 
Add some pointers to the FAQ for common pitfalls during installation.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-01-04 13:29:17 -05:00
Kevin O'Connor 8944e2104d docs: Add FAQ item on AVR watchdog restart failures 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2017-12-11 18:17:14 -05:00
Kevin O'Connor 319221ee23 docs: Provide additional information on "make flash" failures 
Add some additional information on "make flash" problems.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2017-12-11 17:33:29 -05:00
Kevin O'Connor 37788c1e55 docs: Add a FAQ document 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2017-11-30 15:19:40 -05:00