Commit Graph

4233 Commits

Author SHA1 Message Date
Kevin O'Connor 1aa4becc60 bed_mesh: Fix off-by-one error in faulty region error report
Reported by @craiglink.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-08-17 12:05:59 -04:00
Lukasz Piatkowski a90c8d7bc8
config: added ender3 with robin e3d 1.1 (#4252)
Signed-off-by: Łukasz Piątkowski <piontec@gmail.com>
2021-08-17 11:49:52 -04:00
Kevin O'Connor e3cf8fc819 motion_report: Fix typo causing incomplete queries
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-08-17 00:10:44 -04:00
Kevin O'Connor 7fddc5a8fa avr: Fix typo causing broken gpio mappings
Commit 070fac07 had a typo causing two PINE definitions to be added to
the list of available GPIOs.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-08-15 09:48:33 -04:00
Kevin O'Connor 070fac0702 avr: Define PORTE on atmega328p
The atmega328pb supports PORTE, but the current avr-libc toolchain
doesn't support the atmega328pb.  So, for now, add support for PORTE
to atmega328p.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-08-14 22:00:17 -04:00
Kevin O'Connor cf3c7cd99a avr: Rename the analog-only PE0/PE1 pins on atmega168/328 to PE2/PE3
The atmega328pb has officially named these pins as PE2 and PE3, so use
that naming scheme instead of the previous Klipper invented names.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-08-14 22:00:17 -04:00
Kevin O'Connor f759df3cd7 endstop_phase: Convert to using tmc mcu_phase_offset
Now that the TMC drivers track the phase offset, use that to implement
endstop phase.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-08-08 22:28:10 -04:00
Kevin O'Connor 06b8169f56 tmc: Track offset between tmc driver and mcu position
Track the offset between driver phase and mcu position.  This offset
should be constant as long as neither the driver nor the mcu is reset.
If the offset ever changes, log a warning.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-08-08 22:28:10 -04:00
Kevin O'Connor c2bfeb60aa tmc: Move stepper phase reading code to TMCCommandHelper class
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-08-06 13:12:49 -04:00
Kevin O'Connor 24586f0c31 stepper: Query the stepper mcu position during startup
Try to keep the host mcu_position synchronized with the
micro-controller by querying during startup and after every homing
event.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-08-06 13:12:49 -04:00
Kevin O'Connor 33dcb38297 tmc: Consistently use lower case for all TMC field names
The Trinamic specs aren't consistent with upper vs lower case, which
can be confusing.  Improve clarity by using lower case names
consistently in the code.  Register names will continue to use all
upper case naming in the code.

Update the SET_TMC_FIELD command to automatically convert field names
to lower case.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-08-06 13:12:49 -04:00
Kevin O'Connor a52a627893 tmc2208: Send pdn_disable UART setup as first command to chip during init
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-08-06 13:12:49 -04:00
Kevin O'Connor fa7a91a38b homing: Improve error messages on a printer shutdown during homing
If a shutdown occurs during homing, make sure any follow up errors are
clear that the cause of the error is the shutdown.  This suppresses
the confusing "Unable to obtain 'trsync_state' response" messages.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-08-06 13:05:09 -04:00
Kevin O'Connor afada5e79e trapq: Prune interrupted moves from history on trapq_set_position()
It is possible for a homing move to not fully complete.  Fixup the
trapq history to make processing of the history easier for callers.
Similarly, do not add artificial "null" moves to the trapq history.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-08-06 12:22:07 -04:00
Kevin O'Connor b17ec3d2e9 stepcompress: Pass clock to stepcompress_set_last_position()
Using sc->last_step_clock for the last position marker does not work
properly, because the stepper.py code calls stepcompress_reset() prior
to calling stepcompress_set_last_position().  Fix by passing an
explicit clock to stepcompress_set_last_position().

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-08-06 11:19:36 -04:00
Kevin O'Connor 3176150050 mkdocs_hooks: Improve check for not in a list
Look for lines that don't start with a list and don't start with a
space to check for the end of a list.  This fixes the rendering of the
list in BLTouch.md .

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-08-02 16:14:54 -04:00
shiftingtech 36e3969219
probe: bugfix to z_offset_apply_probe (#4553)
Command was accessing the wrong variable for the existing z offset,
leading to bad behavior.

Signed-off-by: Ben Eastep <shifting@shifting.ca>
2021-08-02 16:08:19 -04:00
Kevin O'Connor b8f6b90467 mkdocs_hooks: Add some comments to the script
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-08-02 15:48:51 -04:00
Kevin O'Connor b837a344c1 _klipper3d: Add additional comments to mkdocs.yml
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-08-02 14:05:25 -04:00
Kevin O'Connor c3ab8fee90 docs: Reorder sections of Debugging.md
Reorder the sections to put most useful information at the top.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-08-02 12:49:48 -04:00
Kevin O'Connor 4d5c619b8e scripts: Update graphing scripts to work with either python2 or python3
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-08-02 12:44:05 -04:00
Tircown a143921534
idex_modes: Fix get_status (#4550)
Fix get_status to be called without eventtime parameter.

Signed-off-by: Fabrice GALLET <tircown@gmail.com>
2021-08-01 15:10:45 -04:00
Kevin O'Connor 0971a8c2e1 stm32: Support PB7/PB6 for USART1 on stm32f0
Add support for USART1 on PB7/PB6.

Remove STM32_SERIAL_USART1_ALT_PA15_PA14 option and allow all serial
mappings to be used on stm32f031.

Reported by @Desuuuu.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-08-01 13:46:31 -04:00
Kevin O'Connor 69d9497df3 webhooks: Remove spaces from json messages sent on api server
Reduce the bandwidth slightly by removing unnecessary spaces in
messages.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-07-29 16:54:21 -04:00
Kevin O'Connor 60aa05829f motion_report: Add get_status() method with current requested toolhead position
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-07-29 16:53:32 -04:00
Kevin O'Connor 38766c367f motion_report: Add new extras module for low-level motion diagnostics
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-07-29 16:35:30 -04:00
Kevin O'Connor f0dbeb0493 stepper: Simplify helper module registration of stepper motors
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-07-29 16:35:30 -04:00
Kevin O'Connor c632b377ca mcu: Support returning the mcu reported shutdown time
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-07-29 16:35:30 -04:00
Kevin O'Connor cbd5680ae0 extruder: Add get_trapq() method
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-07-29 16:35:30 -04:00
Kevin O'Connor 7013a7b15f stepcompress: Support extracting stepcompress history
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-07-29 16:35:30 -04:00
Kevin O'Connor fbfa31a3c3 stepcompress: Rename 'struct history_move' to 'struct history_steps'
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-07-29 16:35:30 -04:00
Kevin O'Connor 07f0ecb4d0 trapq: Store toolhead.set_position() updates in trapq history
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-07-29 16:35:30 -04:00
Kevin O'Connor 45c232b2c7 trapq: Keep history of recent trapq moves
Store trapq moves in a separate "history" list after each move is
nominally expired.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-07-29 16:35:30 -04:00
Kevin O'Connor e2f483aea3 trapq: Rename trapq_free_moves() to trapq_finalize_moves()
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-07-29 16:35:30 -04:00
Kevin O'Connor d1b41ea4a1 force_move: Note force_enable() and restore_enable() are internal functions
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-07-29 16:35:30 -04:00
Damien be122411b5 klipper3d: links to anchors not working with Safari
Solves issue #4538

Signed-off-by: Damien Martin <damlobster@gmail.com>
2021-07-28 09:26:08 -04:00
shiftingtech 32eb2ee2d1
docs: fixed babystepping patch (#4526)
Just a quick cleanup to where I flubbed the Z_OFFSET_APPLY_ENDSTOP and  Z_OFFSET_APPLY_PROBE documentation

Signed-off-by: Ben Eastep <shifting@shifting.ca>
2021-07-27 21:57:18 -04:00
Kevin O'Connor 75e958e57d Revert "README: Fix links to www.klipper3d.org"
This reverts commit baad3f281d.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-07-27 19:00:01 -04:00
Kevin O'Connor a80c7d71dc Revert "workflows: Point to https://www.klipper3d.org/Contact"
This reverts commit d14015111e.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-07-27 18:59:46 -04:00
Kevin O'Connor a17c2ae397 _klipper3d: Set use_directory_urls to False
Restore old link behavior - each document file will have a single html
file ending in the ".html" suffix.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-07-27 18:58:08 -04:00
Kevin O'Connor d14015111e workflows: Point to https://www.klipper3d.org/Contact
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-07-27 18:08:10 -04:00
Kevin O'Connor ba16c0f1aa _klipper3d: Move mkdocs.yml to docs/_klipper3d
Reported by @damlobster .

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-07-27 17:10:59 -04:00
Kevin O'Connor baad3f281d README: Fix links to www.klipper3d.org
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-07-27 14:25:38 -04:00
Kevin O'Connor 9c6b4d1bf4 _klipper3d: Add comments to files in this directory
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-07-27 13:49:06 -04:00
Kevin O'Connor 994f388b5c check_whitespace: Also check txt, css, html, yaml, and yml files for errors
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-07-27 13:37:48 -04:00
Kevin O'Connor bca64895e4 _klipper3d: Add trailing newline to extra.css
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-07-27 13:34:40 -04:00
Kevin O'Connor 37efd1b8f1 docs: Use hash marks for header lines
Consistently use leading hash marks (#) to note section headers.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-07-27 13:29:36 -04:00
Damien Martin afca515e2c docs: make mkdocs_hooks.transform more robust
- Keeps the markdown inside the code blocks as is
- Logs the modified lines (mkdocs serve —verbose)

Signed-off-by: Damien Martin <damlobster@gmail.com>
2021-07-27 13:15:25 -04:00
Damien ea802aa91e docs: Setup mkdocs with mkdocs-material theme
This changes the framework used to generate the klipper3d site.

Signed-off-by: Damien Martin <damlobster@gmail.com>
2021-07-27 13:15:25 -04:00
Damien cff61605fb docs : make modifications to all md files to make them compatible with mkdocs
all markdown files must have a single H1 heading at the top.

Signed-off-by: Damien Martin <damlobster@gmail.com>

Update CNAME
2021-07-27 13:15:25 -04:00