91691afdcf
gcode: Catch errors on fd read and write
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-09-12 21:06:54 -04:00
d1da6100a6
klippy: Remove unneeded loop in run() method
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-09-12 21:06:54 -04:00
32b763efb1
config: Fix generic-re-arm.cfg encoder pins
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-09-12 14:43:10 -04:00
d459ae648d
config: Update generic-re-arm.cfg with menu buttons
...
Reported by @J-charles-C.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-09-12 09:07:50 -04:00
e3a49dc692
quad_gantry_level: Add gantry leveling (ruled hyperbolic parabola correction) ( #631 )
...
Signed-off-by: Maks Zolin <mzolin@vorondesign.com>
2018-09-12 08:33:20 -04:00
0c0087ce42
config: Update example-extras.cfg ( #641 )
...
Just correcting a couple of spelling errors I noticed.
Signed-off-by: Ben Warren <boffdroid@gmail.com>
2018-09-12 08:13:12 -04:00
5791a4d8c4
toolhead: Set commanded_pos[] to move.end_pos
...
Commit 4573932f
2018-09-11 13:45:33 -04:00
4573932f89
toolhead: Handle rounding errors with extrude only moves
...
It's possible that a g-code transform class may make an extrude only
move appear as a kinematic move due to limitations of double precision
math. Handle this by checking for an inconsequential move distance
instead of checking for a move distance of exactly zero.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-09-11 13:40:52 -04:00
947a7b2b0f
tmc2660: Implementation of TMC2660 extra ( #621 )
...
Signed-off-by: Florian Heilmann <Florian.Heilmann@gmx.net>
2018-09-11 12:34:05 -04:00
f15cd62587
docs: Update Pressure_Advance.md document
...
Update the document to recommend tuning with decreased acceleration
and with square_corner_velocity disabled. Using this approach makes it
possible to test with significantly higher pressure advance values.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-09-11 12:00:43 -04:00
ea7de3bcad
config: Use fastest PWM time in mini-rambo PWM DAC config
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-09-11 09:40:48 -04:00
b595c3e423
config: Add example lcd section to smoothieboard config
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-09-10 15:29:54 -04:00
d6f72eefa1
bed_mesh: Cache last position when get_position() is called.
...
Fixes issue #626 .
Signed-off-by: Eric Callahan <arksine.code@gmail.com>
2018-09-10 15:10:43 -04:00
ea129d869e
config: Fix position_endstop typo in sample-bltouch.cfg
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-09-09 10:30:06 -04:00
aac2fee9de
config: Add display buttons pins for anycubic kossel pulley 2016 ( #614 )
...
Signed-off-by: Alejandro <alemorbel@alemorbel.es>
2018-09-06 18:31:55 -04:00
c8dc47b162
docs: Note digipot support in Features.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-09-03 21:10:53 -04:00
ac3aa097fb
docs: Features.md updates
...
Add information on new features in Klipper.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-09-03 20:55:53 -04:00
ef6068dc42
mcu: Log MCU information before configuring
...
Log the details of the MCU prior to attempting to configure the MCU.
This way, the log contains the MCU information even if a configuration
error occurs.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-09-03 18:34:10 -04:00
5801e6f4d0
pins: Verify the pin_map setting
...
Raise an error if pin_map is not set to a valid value.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-09-03 18:16:44 -04:00
30013a1fb8
mcu: Rename add_config_object() to register_config_callback()
...
Change the name of the config registration method and pass an explicit
reference to the callback to the new method. This makes the
relationship between mcu registration and build_config() more clear in
the calling code.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-09-03 11:48:22 -04:00
a8d4a7ef46
config: Be clear that multi-line parameters must use indentation
...
Also, be clear that probe points are nozzle coordinates (not probe
coordinates).
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-09-02 14:40:26 -04:00
8fe8a6deb3
statistics: Move stats handling to new "extras" module
...
Move the generation of statistics to its own module.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-09-02 13:46:19 -04:00
18b04ffe68
klippy: Rename lookup_module_objects() to lookup_objects()
...
Rename the method and support returning all known objects.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-09-02 12:53:34 -04:00
50196c7141
klippy: Use reactor register_callback() mechanism
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-09-02 12:43:40 -04:00
ab4060e145
console: Use reactor register_callback() mechanism
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-09-02 12:31:36 -04:00
165317e33f
toolhead: Support M204 with P and T instead of S
...
Recent versions of Slic3r now send M204 with P and T instead of with
S, so support that.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-09-02 12:22:43 -04:00
5632cf6d77
serialqueue: Increase receive message debug queue to 100 messages
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-09-02 12:16:13 -04:00
ce79b6ca00
menu: Queue g-code commands to avoid command reordering
...
The gcode.run_script() code can pause which can result in the menu
code being called reentrant - avoid that by queuing the gcode commands
within the menu code.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-09-02 12:14:27 -04:00
b656792616
config: Add encoder pins to Creality Ender2 and CR10 configs
...
Reported by @faboaic.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-09-02 11:52:20 -04:00
cf4f23ebf2
probe: Use probe speed for initial move to the Z height
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-08-30 16:20:23 -04:00
f3edea2943
toolhead: Forward original config error if raised in kinematics class
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-08-30 10:19:08 -04:00
40b7ba5111
probe: Add ability to multi-sample points to ProbePointsHelper
...
Signed-off-by: Eric Callahan <arksine.code@gmail.com>
2018-08-29 12:01:19 -04:00
1588426229
probe: Refactor z lift code to its own function.
...
Call lift-z prior to the first move. This prevents the nozzle from hitting the build surface in situations that home the nozzle off and below the bed.
Signed-off-by: Eric Callahan <arksine.code@gmail.com>
2018-08-29 12:01:14 -04:00
4acda88e8d
docs: Fix spelling error in example-extras.cfg
...
Fix "interally" spelling error - reported by @bistory.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-08-28 15:36:53 -04:00
6b4e44011c
test: Make white space error report more pronounced
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-08-27 13:21:15 -04:00
ca7a80a946
tmc2208: Initial support for configuring TMC2208 drivers
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-08-27 12:51:27 -04:00
afd5d55c00
tmc2130: Minor code cleanup
...
Rework the code to use set_register() with the string name of the
desired register to set. Add a get_register() method.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-08-27 12:47:24 -04:00
e5d95fdd00
stm32f1: Add support for gpio_x_reset()
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-08-27 12:45:01 -04:00
983c84b12f
pru: Add wrappers for gpio_x_reset()
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-08-27 12:45:01 -04:00
75de9cb4c0
simulator: Add support for gpio_x_reset()
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-08-27 12:45:01 -04:00
fa3d2b97bd
samd21: Add support for gpio_x_reset()
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-08-27 12:45:01 -04:00
eec58b99fe
sam4e8e: Add support for gpio_x_reset()
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-08-27 12:44:59 -04:00
109eff0191
sam3x8e: Add support for gpio_x_reset()
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-08-27 12:40:38 -04:00
5a993b743e
lpc176x: Add support for gpio_x_reset()
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-08-27 12:40:38 -04:00
1ae67441c3
avr: Add support for gpio_x_reset()
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-08-27 12:40:38 -04:00
34fe4cce14
sched: Don't require 2ms pad in sched_add_timer()
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-08-27 12:40:38 -04:00
480415d2e8
docs: Update Bootloaders.md with AVR lfuse hints
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-08-27 12:34:37 -04:00
a5189f7c25
docs: Add some notes to Bootloaders.md on using the atmega168
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-08-27 12:08:55 -04:00
0bce44e1bb
avr: Disable HAVE_GPIO_BITBANGING on atmega168
...
The atmega168 doesn't have enough flash space to fit all features -
disable the "bit banging" interfaces to make room.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-08-27 11:20:29 -04:00
a20d9d3bd5
samd21: Enable HAVE_GPIO_BITBANGING
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-08-27 11:11:28 -04:00
Kevin O'Connor