Commit Graph

246 Commits

Author SHA1 Message Date
Kevin O'Connor 5f9ce32fae docs: Be more clear that a baud of 250000 is recommended
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-11-13 14:06:27 -05:00
Kevin O'Connor c4058f71fb docs: Clarify M109/M190 in G-Code documentation
Signed-off-by: Lucas Fink <software@lfcode.ca>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-28 14:22:30 -04:00
Kevin O'Connor 057acb07b7 docs: Add a Slicers.md document
Add some information on configuring a slicer for use with Klipper.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-28 10:47:32 -04:00
Kevin O'Connor 47e45ab391 docs: Note the use of gcode_macro in G-Codes.md
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-28 10:38:03 -04:00
lf a33792f07e util: Fix versioning when gitdir is absent (#809)
The gitdir previously could be absent and produce a version of "" in
spite of checks for it. Fixed.

Parent directories with shlex-interpreted characters in their names
could be misinterpreted. Removed shlex parsing.

Packagers may want to remove the git history to slim down the package
size, so add an option for using a file 'version' in the klippy
directory to set version without using git.

Signed-Off-By: Lucas Fink <software@lfcode.ca>
2018-10-27 10:44:38 -04:00
Kevin O'Connor a7c8476e98 docs: Update pressure advance doc to note it only impacts the extruder
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-25 19:09:47 -04:00
Kevin O'Connor 3d7e8fa5ec docs: Note impact of warping during pressure advance tuning
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-25 12:10:47 -04:00
Kevin O'Connor ca7dd8bfd4 docs: Update Pressure_Advance.md - don't set square_corner_velocity=0
Setting the square corner velocity to zero would cause stuttering
during the test if a bed mesh is in effect.  It's possible to get the
desired effect by reducing the square corner velocity and setting the
pressure advance lookahead time instead.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-25 11:43:03 -04:00
Florian Heilmann b6bf455155 tmc2660: Add endstop phase detection functionality to TMC2660 extra (#816)
Signed-off-by: Florian Heilmann <Florian.Heilmann@gmx.net>
2018-10-24 16:01:12 -04:00
Kevin O'Connor 04a12ec9bd docs: Update stm32f1.md - usb is now supported.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-22 13:22:58 -04:00
Kevin O'Connor e4bb90a1ca bed_mesh: Do not automatically run G28 on BED_MESH_CALIBRATE / BED_MESH_MAP
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-22 11:26:01 -04:00
Kevin O'Connor 925562cfb1 delta_calibrate: Do not automatically run G28 on DELTA_CALIBRATE
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-22 11:26:01 -04:00
Kevin O'Connor ca04caa42c docs: Fix SAM4E8E benchmark test revision
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-22 11:21:43 -04:00
Kevin O'Connor 2b81b2935c docs: Update SAM4E8E benchmarks
New benchmark numbers reported by @FHeilmann.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-22 11:18:55 -04:00
Kevin O'Connor b903f84c80 docs: Replace get_status example with get_clock in Protocol.md
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-20 11:53:32 -04:00
Kevin O'Connor 530a37196c docs: Update LPC176x benchmarks
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-18 09:55:02 -04:00
Kevin O'Connor 0079311b0b docs: Add an Endstop_Phase.md document
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-16 13:09:49 -04:00
Kevin O'Connor 1e71909d02 endstop_phase: Add support for an ENDSTOP_PHASE_CALIBRATE command
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-16 13:09:49 -04:00
Kevin O'Connor f5c99c1dec docs: Update benchmarks for Arduino Due
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-13 11:57:13 -04:00
Kevin O'Connor aa693fbdc1 docs: Updates to stm32f103 benchmarks
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-11 10:57:24 -04:00
Kevin O'Connor 75fa74313c stm32f1: Add support for building with bootloader support
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-11 10:50:51 -04:00
Kevin O'Connor bc5e961d73 stm32f1: Initial support for serial over USB
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-11 10:50:51 -04:00
Kevin O'Connor 1e07be4db4 docs: Add a "Lost communication with MCU" section to the FAQ
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-09 11:22:28 -04:00
Kevin O'Connor 852d1666bb docs: Fix typo in BED_MESH_PROFILE description in G-Codes.md
Reported by @fiveNinePlusR

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-04 19:01:18 -04:00
Arksine b261d31ec5 bed_mesh: Add ability to save mesh state to persistent memory
Signed-off-by: Eric Callahan <arksine.code@gmail.com>
2018-10-02 16:26:35 -04:00
Kevin O'Connor 5c267e4f69 docs: Update Features.md document with tmc2660 support
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-02 14:07:33 -04:00
Kevin O'Connor 33887b8c39 probe: Support manual probing at runtime
Don't require the config file to specify manual probing.  Instead,
allow the user to select manual probing on each ProbePointsHelper
invocation.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-01 11:12:30 -04:00
Kevin O'Connor 4b5db04f78 docs: Add Delta_Calibrate.md guide with "enhanced delta calibration"
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-09-25 13:48:46 -04:00
Charlie 1165c0c9c5 docs: Additional images for enhanced calibration procedure reference (#639)
Signed-off-by: Charles Galant <cgalant@cogwheel.net>
2018-09-25 13:48:46 -04:00
Kevin O'Connor 0b2c89ecaf delta_calibrate: Initial support for enhanced delta calibration
Add support for an enhanced delta calibration routine that performs XY
dimension calibration.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-09-25 13:48:46 -04:00
Kevin O'Connor 5a1b2d61ae pid_calibrate: Support saving calibration data via SAVE_CONFIG
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-09-25 13:48:46 -04:00
Kevin O'Connor 531134f092 configfile: Add support for rewriting the printer config file
Add support for writing back the main printer config file with
additional calibration data stored in it.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-09-25 13:48:46 -04:00
Kevin O'Connor 3d4ee9e962 docs: Add stm32f1.md link to Overview.md
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-09-20 20:11:04 -04:00
Kevin O'Connor 174754299a heater: Add new TURN_OFF_HEATERS command
Add a command that will turn off all heaters in the printer.  Run this
command in the default idle_timeout action.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-09-18 16:01:07 -04:00
Kevin O'Connor 094b9de69e gcode: Send proactive state messages
Send a g-code info message on printer state changes.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-09-12 21:31:27 -04:00
Kevin O'Connor f15cd62587 docs: Update Pressure_Advance.md document
Update the document to recommend tuning with decreased acceleration
and with square_corner_velocity disabled. Using this approach makes it
possible to test with significantly higher pressure advance values.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-09-11 12:00:43 -04:00
Kevin O'Connor c8dc47b162 docs: Note digipot support in Features.md
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-09-03 21:10:53 -04:00
Kevin O'Connor ac3aa097fb docs: Features.md updates
Add information on new features in Klipper.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-09-03 20:55:53 -04:00
Kevin O'Connor 480415d2e8 docs: Update Bootloaders.md with AVR lfuse hints
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-08-27 12:34:37 -04:00
Kevin O'Connor a5189f7c25 docs: Add some notes to Bootloaders.md on using the atmega168
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-08-27 12:08:55 -04:00
Kevin O'Connor ee67715e2b docs: Fix link in Bootloaders.md
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-08-27 09:16:27 -04:00
Kevin O'Connor 28fe6a5df0 docs: Update SAMD21 flashing information in Bootloaders.md
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-08-27 09:07:27 -04:00
Kevin O'Connor 9b56c4f780 docs: Update Bootloaders.md with updated bossac info for sam3x8e
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-08-27 08:54:43 -04:00
Kevin O'Connor 96acfdc6d2 docs: Minor rewording of Marlin pin number section of FAQ
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-08-26 23:06:32 -04:00
Kevin O'Connor a27e82aef3 docs: Add a section to the FAQ on translating Marlin pin numbers
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-08-24 21:43:53 -04:00
Florian Heilmann a8a912fbb5 docs: Update sam4e8e docs and benchmarks (#562)
Signed-off-by: Florian Heilmann <Florian.Heilmann@gmx.net>
2018-08-22 19:17:43 -04:00
Arksine 868a1f951b docs: Add Mesh Bed Leveling to G-Codes.md
Signed-off-by: Eric Callahan <arksine.code@gmail.com>
2018-08-17 09:22:55 -04:00
Kevin O'Connor be3131de3e docs: Update Config_checks.md to use STEPPER_BUZZ
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-08-09 13:46:07 -04:00
Kevin O'Connor 3f59c3dd48 docs: Add a Bootloaders.md document
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-08-08 20:47:04 -04:00
Kevin O'Connor 71063fe500 docs: Warn about possible pin conflicts in benchmarks
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-08-08 13:52:08 -04:00