5f0885958d
neopixel: Support chains with a mix of color_order
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-04-18 10:16:10 -04:00
53a7f1dd76
led: Remove has_white check from LEDHelper
...
There is no harm in checking for a white config setting.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-04-18 09:34:25 -04:00
630d3b3444
led: Fix SET_LED TRANSMIT=1 handling
...
If the final update in a series of SET_LED update commands didn't
alter a color than the transmit would not occur - even if prior
commands did make color changes. Refactor the update code and fix.
Reported by @mstansberry.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-04-18 08:55:21 -04:00
240f8ea60b
htu21d: SI7021 is has id 0x15 ( #5375 )
...
This is most probably the result of a copy paste error. All vendor documentation for SI7021 (e.g. https://www.silabs.com/documents/public/data-sheets/Si7021-A20.pdf ) points to 21 and it actually only works when adapted to 0x15 (=21).
Signed-off-by: Uli Wolf <github+klipper@wolf-u.li>
2022-04-11 10:33:41 -04:00
76b22b3125
smart_effector: Initial support of programmable SmartEffector
...
Signed-off-by: Dmitry Butyugin <dmbutyugin@google.com>
2022-04-09 19:04:57 -04:00
22297229b7
temperature_fan: Fix divide by zero error when pid_Ki is zero
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-04-07 12:11:54 -04:00
647a1cd8ca
temperature_fan: Remove deprecated pid_integral_max option
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-04-07 12:10:48 -04:00
555ac58a3f
pca9632: Add support for configurable color_order
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-04-07 11:48:25 -04:00
f0700c0985
pca9632: Support using hardware I2C
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-04-07 11:43:52 -04:00
dc7b02f329
neopixel: Support arbitrary RGBW strings in color_order config
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-04-06 09:27:36 -04:00
e6bfc4c9aa
led: Support setting display_template parameters via SET_LED_TEMPLATE
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-03-31 13:08:12 -04:00
1ab3ac39e4
led: Support automated LED updates based on display_template results
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-03-31 13:08:12 -04:00
a6ab56c0a6
display: Add a new PrinterDisplayTemplate class for tracking template macros
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-03-31 13:08:12 -04:00
2001eecd5e
pca9533: Add support for 4 brightness levels
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-03-31 13:08:12 -04:00
47828b4056
pca9533: Update to use LEDHelper class
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-03-31 13:08:12 -04:00
271c2ac95b
pca9632: Update to use LEDHelper class
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-03-31 13:08:12 -04:00
0c425cf014
mcp4018: Support setting minclock and reqclock in SoftwareI2C class
...
This is in preparation for pca9632 changes.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-03-31 13:08:12 -04:00
9136a29196
dotstar: Update to use LEDHelper class
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-03-31 13:08:12 -04:00
8b8818c0f7
neopixel: Update to use LEDHelper class
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-03-31 13:08:12 -04:00
96795def9c
led: Add support for PWM controlled LEDs
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-03-31 13:08:12 -04:00
c08f83ff47
pid_calibrate: Improve Python3 compatibility in debug file output
...
Reported by @kpishere.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-03-29 20:37:03 -04:00
4d1c3478ab
angle: Add support for reading tle5012b chip registers (for debugging)
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-03-29 20:34:46 -04:00
1275281ab6
angle: Initialize tle5012b chip variants to same configuration
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-03-29 20:34:46 -04:00
1b08553a42
angle: Report tle5012b temperature
...
Export the tle5012b temperature readings when performing measurements.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-03-29 20:34:46 -04:00
f9d505e376
sensor_angle: Support TLE5012b frame counter for timing
...
Use the tle5012b internal frame counter to calculate the time of each
measurement.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-03-29 20:34:46 -04:00
aec742ece4
angle: Initial support for angle sensor calibration
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-03-29 20:34:46 -04:00
74937326d3
sensor_angle: Add support for bulk querying of spi angle sensors
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-03-29 20:34:46 -04:00
8049243221
atsam: Add support for SAM E70
...
Signed-off-by: Alex Maclean <monkeh@monkeh.net>
2022-03-26 11:59:27 -04:00
1390b4d600
virtual_sdcard: Allow spaces in file path for M23
...
Also makes M23 work normally with rename_existing.
Signed-off-by: Justin Schuh <code@justinschuh.com>
2022-03-18 11:44:33 -04:00
98d3fffd79
palette2: Fix typo (gmcd vs gcmd)
...
Reported by @Ludy87.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-03-17 20:53:07 -04:00
a43973b0e0
skew_corrections: Fix typo (gmcd vs gcmd)
...
Reported by @Ludy87.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-03-17 20:52:10 -04:00
0761026e36
pca9632: LED module for FlashForge Dreamer 3D printer ( #4654 )
...
Added PCA9632 LED module support using software I2C from MCP4018
modulo drive the LED strip of a FlashForge Dreamer 3D printer.
Based on the PCA9533 module.
Signed-off-by: Ricardo Alcantara <ricardo@vulcanolabs.xyz>
2022-03-14 14:28:42 -04:00
12e304fbec
temperature_fan: add missing round function to get_status temperature
...
Signed-off-by: Stefan Dej <meteyou@gmail.com>
2022-03-14 13:48:38 -04:00
02d770ae3c
neopixel: add BGR for neopixel ( #5160 )
...
Signed-off-by: Thomas Liebold <electron2410@gmail.com>
2022-03-14 12:30:58 -04:00
38b992532a
display_status: stops M73 from setting progress to 0 if P missing
...
Signed-off-by: Pedro Lamas <pedrolamas@gmail.com>
2022-03-08 14:20:35 -05:00
4815a946c2
extruder_stepper: Do not default to synching with "extruder" at startup
...
With recent changes, the extruder_stepper may be used for new
purposes, and synchronizing to the "extruder" motion queue at startup
may become a confusing default.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-03-04 13:38:59 -05:00
7c964e5fdf
dac084S085: SPI DAC DAC084S085 implementation ( #5134 )
...
Alligator Board Rev2 tested config sample.
Add example configuration file for Alligator board rev.3.
Signed-off-by: Lorenzo Franco <lorenzo.franco@lorenzing.com>
2022-02-22 10:28:28 -05:00
b0a24a4458
motion_report: Ensure startstop_cb is called atomically
...
Make sure APIDumpHelper() does not invoke the startstop callback while
it is already running.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-02-21 22:22:14 -05:00
8b0c6fcb08
bed_mesh: Report actual mesh profiles as status
...
Report the actual profiles available via BED_MESH_PROFILE
via the status for use by clients.
Signed-off-by: Kurt Haenen <kurt.haenen@gmail.com>
2022-02-16 13:42:19 -05:00
1c594ef27a
bed_mesh: Fix integer division issue on Python3
...
Reported by @CODeRUS.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-02-10 14:09:15 -05:00
9ec9742484
extruder: Add support for reversing the direction of extruder stepper movement
...
Extend SET_EXTRUDER_ROTATION_DISTANCE to support reversing the
direction of extruder movement.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-02-10 13:24:21 -05:00
189188e3ca
extruder: Add a SET_EXTRUDER_ROTATION_DISTANCE command
...
Support altering the extruder distance using the higher-level
rotation_distance. This is in preparation for removal of the
SET_EXTRUDER_STEP_DISTANCE command.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-02-10 13:24:21 -05:00
54646c77dc
bme280: fix integer handling for python3 in bme280.py ( #5237 )
...
Singed-off-by: Christopher Conroy <cbc02009@gmail.com>
2022-02-06 12:15:35 -05:00
28b568a6ac
gcode_arcs: detect CW / CCW move with renamed G2/G3 command ( #5096 )
...
The G2 / G3 command might be renamed using `gcode_macro` + `rename_existing`. This change allow detecting clockwise / anti-clockwise moves when the command gets renamed.
Signed-off-by: Nick Douma <n.douma@nekoconeko.nl>
2022-01-22 20:47:51 -05:00
2f1edac922
tmc: Fix number of arguments in phase endstop warning ( #5184 )
...
Signed-off-by: Konstantin Vogel <konstantin.vogel@gmx.net>
2022-01-22 20:41:44 -05:00
eb2a67cb95
extruder: Support SYNC_STEPPER_TO_EXTRUDER on extruder objects
...
Refactor the extruder_stepper support so that it uses the
ExtruderStepper class defined in extruder.py.
Support the SYNC_STEPPER_TO_EXTRUDER command on steppers defined in
either extruder_stepper or extruder config sections.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-01-16 19:01:15 -05:00
34a1ce4837
tmc2130: Rework current selection to prefer vsense=1
...
It is preferable to program the tmc drivers with an irun (or cs)
setting near 31, as otherwise the driver may have reduced microstep
precision. It was possible for the driver to be programmed with
irun=16 or irun=17 when it could have been configured with irun=31
with vsense=1 instead. This would occur on tmc2130/tmc2208/tmc2209
drivers for values around 0.900 to 1.000 amps (when using a typical
sense_resistor settings of 0.110 Ohms).
Change the code to prefer using vsense=1 to avoid this issue.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-01-16 19:00:00 -05:00
538f09a2da
pause_resume: Do not clobber default state name by accident ( #5156 )
...
Previously accidentally used 'default' state name instead of the
stated one ('PAUSE_STATE'). This might collide with user usage of the
SAVE_GCODE_STATE macro.
Signed-off-by: David Grundberg <individ@acc.umu.se>
2022-01-16 13:00:24 -05:00
babb067b60
neopixel: Update neopixel.py to add BRG color order ( #5110 )
...
Add BRG color option.
Document BRG color option.
Signed-off-by: Timothy Abraham <Timothyabe93@gmail.com>
2022-01-12 12:18:08 -05:00
1c24317380
stm32: Enable ADC support on stm32g0
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-12-23 22:15:26 -05:00
Kevin O'Connor