3diy
/
klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
1,511 Commits 1 Branch 0 Tags 27 MiB
Commit Graph

241 Commits

Author SHA1 Message Date
Kevin O'Connor a7c8476e98 docs: Update pressure advance doc to note it only impacts the extruder 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-10-25 19:09:47 -04:00
Kevin O'Connor 3d7e8fa5ec docs: Note impact of warping during pressure advance tuning 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-10-25 12:10:47 -04:00
Kevin O'Connor ca7dd8bfd4 docs: Update Pressure_Advance.md - don't set square_corner_velocity=0 
Setting the square corner velocity to zero would cause stuttering
during the test if a bed mesh is in effect.  It's possible to get the
desired effect by reducing the square corner velocity and setting the
pressure advance lookahead time instead.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-10-25 11:43:03 -04:00
Florian Heilmann b6bf455155 tmc2660: Add endstop phase detection functionality to TMC2660 extra (#816) 
Signed-off-by: Florian Heilmann <Florian.Heilmann@gmx.net>
 2018-10-24 16:01:12 -04:00
Kevin O'Connor 04a12ec9bd docs: Update stm32f1.md - usb is now supported. 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-10-22 13:22:58 -04:00
Kevin O'Connor e4bb90a1ca bed_mesh: Do not automatically run G28 on BED_MESH_CALIBRATE / BED_MESH_MAP 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-10-22 11:26:01 -04:00
Kevin O'Connor 925562cfb1 delta_calibrate: Do not automatically run G28 on DELTA_CALIBRATE 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-10-22 11:26:01 -04:00
Kevin O'Connor ca04caa42c docs: Fix SAM4E8E benchmark test revision 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-10-22 11:21:43 -04:00
Kevin O'Connor 2b81b2935c docs: Update SAM4E8E benchmarks 
New benchmark numbers reported by @FHeilmann.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-10-22 11:18:55 -04:00
Kevin O'Connor b903f84c80 docs: Replace get_status example with get_clock in Protocol.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-10-20 11:53:32 -04:00
Kevin O'Connor 530a37196c docs: Update LPC176x benchmarks 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-10-18 09:55:02 -04:00
Kevin O'Connor 0079311b0b docs: Add an Endstop_Phase.md document 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-10-16 13:09:49 -04:00
Kevin O'Connor 1e71909d02 endstop_phase: Add support for an ENDSTOP_PHASE_CALIBRATE command 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-10-16 13:09:49 -04:00
Kevin O'Connor f5c99c1dec docs: Update benchmarks for Arduino Due 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-10-13 11:57:13 -04:00
Kevin O'Connor aa693fbdc1 docs: Updates to stm32f103 benchmarks 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-10-11 10:57:24 -04:00
Kevin O'Connor 75fa74313c stm32f1: Add support for building with bootloader support 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-10-11 10:50:51 -04:00
Kevin O'Connor bc5e961d73 stm32f1: Initial support for serial over USB 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-10-11 10:50:51 -04:00
Kevin O'Connor 1e07be4db4 docs: Add a "Lost communication with MCU" section to the FAQ 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-10-09 11:22:28 -04:00
Kevin O'Connor 852d1666bb docs: Fix typo in BED_MESH_PROFILE description in G-Codes.md 
Reported by @fiveNinePlusR

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-10-04 19:01:18 -04:00
Arksine b261d31ec5 bed_mesh: Add ability to save mesh state to persistent memory 
Signed-off-by: Eric Callahan <arksine.code@gmail.com>
 2018-10-02 16:26:35 -04:00
Kevin O'Connor 5c267e4f69 docs: Update Features.md document with tmc2660 support 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-10-02 14:07:33 -04:00
Kevin O'Connor 33887b8c39 probe: Support manual probing at runtime 
Don't require the config file to specify manual probing.  Instead,
allow the user to select manual probing on each ProbePointsHelper
invocation.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-10-01 11:12:30 -04:00
Kevin O'Connor 4b5db04f78 docs: Add Delta_Calibrate.md guide with "enhanced delta calibration" 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-09-25 13:48:46 -04:00
Charlie 1165c0c9c5 docs: Additional images for enhanced calibration procedure reference (#639) 
Signed-off-by: Charles Galant <cgalant@cogwheel.net>
 2018-09-25 13:48:46 -04:00
Kevin O'Connor 0b2c89ecaf delta_calibrate: Initial support for enhanced delta calibration 
Add support for an enhanced delta calibration routine that performs XY
dimension calibration.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-09-25 13:48:46 -04:00
Kevin O'Connor 5a1b2d61ae pid_calibrate: Support saving calibration data via SAVE_CONFIG 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-09-25 13:48:46 -04:00
Kevin O'Connor 531134f092 configfile: Add support for rewriting the printer config file 
Add support for writing back the main printer config file with
additional calibration data stored in it.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-09-25 13:48:46 -04:00
Kevin O'Connor 3d4ee9e962 docs: Add stm32f1.md link to Overview.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-09-20 20:11:04 -04:00
Kevin O'Connor 174754299a heater: Add new TURN_OFF_HEATERS command 
Add a command that will turn off all heaters in the printer.  Run this
command in the default idle_timeout action.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-09-18 16:01:07 -04:00
Kevin O'Connor 094b9de69e gcode: Send proactive state messages 
Send a g-code info message on printer state changes.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-09-12 21:31:27 -04:00
Kevin O'Connor f15cd62587 docs: Update Pressure_Advance.md document 
Update the document to recommend tuning with decreased acceleration
and with square_corner_velocity disabled. Using this approach makes it
possible to test with significantly higher pressure advance values.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-09-11 12:00:43 -04:00
Kevin O'Connor c8dc47b162 docs: Note digipot support in Features.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-09-03 21:10:53 -04:00
Kevin O'Connor ac3aa097fb docs: Features.md updates 
Add information on new features in Klipper.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-09-03 20:55:53 -04:00
Kevin O'Connor 480415d2e8 docs: Update Bootloaders.md with AVR lfuse hints 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-08-27 12:34:37 -04:00
Kevin O'Connor a5189f7c25 docs: Add some notes to Bootloaders.md on using the atmega168 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-08-27 12:08:55 -04:00
Kevin O'Connor ee67715e2b docs: Fix link in Bootloaders.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-08-27 09:16:27 -04:00
Kevin O'Connor 28fe6a5df0 docs: Update SAMD21 flashing information in Bootloaders.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-08-27 09:07:27 -04:00
Kevin O'Connor 9b56c4f780 docs: Update Bootloaders.md with updated bossac info for sam3x8e 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-08-27 08:54:43 -04:00
Kevin O'Connor 96acfdc6d2 docs: Minor rewording of Marlin pin number section of FAQ 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-08-26 23:06:32 -04:00
Kevin O'Connor a27e82aef3 docs: Add a section to the FAQ on translating Marlin pin numbers 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-08-24 21:43:53 -04:00
Florian Heilmann a8a912fbb5 docs: Update sam4e8e docs and benchmarks (#562) 
Signed-off-by: Florian Heilmann <Florian.Heilmann@gmx.net>
 2018-08-22 19:17:43 -04:00
Arksine 868a1f951b docs: Add Mesh Bed Leveling to G-Codes.md 
Signed-off-by: Eric Callahan <arksine.code@gmail.com>
 2018-08-17 09:22:55 -04:00
Kevin O'Connor be3131de3e docs: Update Config_checks.md to use STEPPER_BUZZ 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-08-09 13:46:07 -04:00
Kevin O'Connor 3f59c3dd48 docs: Add a Bootloaders.md document 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-08-08 20:47:04 -04:00
Kevin O'Connor 71063fe500 docs: Warn about possible pin conflicts in benchmarks 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-08-08 13:52:08 -04:00
Kevin O'Connor cbf019a468 docs: It's difficult to estimate real-world usage from the benchmarks 
Remove the prediction on real-world usage as it's not really practical
to make a prediction.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-08-08 13:39:29 -04:00
Kevin O'Connor fbec3ebb63 docs: Add benchmarking details to docs/Debugging.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-08-08 13:28:08 -04:00
Florian Heilmann 64e6d85898 sam4e8e: Add the SAM4e8e port 
This can be flashed to e.g. the duet wifi using bossac. It requires a
later version as is currently included in the klipper repo (1.8
vs. 1.2). Comms are currently via UART0 only, USB serial is still TBD

Signed-off-by: Florian Heilmann <Florian.Heilmann@gmx.net>
 2018-08-08 10:44:49 -04:00
Kevin O'Connor a5d27c55e1 docs: Update perf benchmarks with SAMD21 results 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-08-07 00:03:42 -04:00
Kevin O'Connor cd24d61515 docs: Minor change to wording of junction speeds 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-08-03 15:48:07 -04:00