57e6acbc5c
docs: Add Bed_Level.md and Probe_Calibrate.md documents
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-02-12 13:20:32 -05:00
f2f54290e8
docs: Add a new Config_Changes.md document
...
Add a document to track non-backwards compatible changes to the
printer config file.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-01-07 20:00:44 -05:00
057acb07b7
docs: Add a Slicers.md document
...
Add some information on configuring a slicer for use with Klipper.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-28 10:47:32 -04:00
0079311b0b
docs: Add an Endstop_Phase.md document
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-16 13:09:49 -04:00
4b5db04f78
docs: Add Delta_Calibrate.md guide with "enhanced delta calibration"
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-09-25 13:48:46 -04:00
3d4ee9e962
docs: Add stm32f1.md link to Overview.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-09-20 20:11:04 -04:00
3f59c3dd48
docs: Add a Bootloaders.md document
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-08-08 20:47:04 -04:00
09a64d24f1
docs: Remove the Todo.md file
...
The Todo.md file has gotten stale, and it is no longer an effective
mechanism for tracking changes. Remove it.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-07-26 12:51:01 -04:00
05ec7ca7ff
docs: Add a G-Codes.md file with the list of available commands
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-03-08 14:11:20 -05:00
1bdebeaebf
docs: Add an initial configuration checklist document
...
Provide a document with basic steps that a user can run to verify that
the pins in the configuration file are set correctly.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-12-26 20:54:37 -05:00
37788c1e55
docs: Add a FAQ document
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-11-30 15:19:40 -05:00
ce7cc798dc
docs: Add Contact.md file with developer contact information
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-10-10 12:43:44 -04:00
a7f339ad1c
docs: Improve documentation for those starting in docs/
...
Those that reach Klipper via github may jump directly to the docs/
directory in search of documentation. Add README.md and rework
Overview.md with that in mind.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-04-27 16:05:26 -04:00
c1c0b2dd38
docs: Avoid using "firmware" in the documentation
...
The term "firmware" is ambiguous - it could refer to the entire
project (host and micro-controller software) or to just the
micro-controller software. Avoid the term in the documentation.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-04-27 15:59:33 -04:00
db5b5f121c
docs: Add initial Pressure Advance tuning document
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-04-19 16:02:11 -04:00
2cce67ad84
docs: Add initial Kinematics document
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-04-15 22:26:03 -04:00
3b668c9baf
docs: Add Releases page with history of releases
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2016-12-23 18:28:42 -05:00
18456f71f8
docs: Add a features document
...
Add a document describing some high-level features in Klipper.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2016-12-20 22:31:46 -05:00
98ce7dc465
docs: Add Firmware_Commands.md with information on common firmware commands
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2016-10-19 13:35:49 -04:00
9edf60ffc6
docs: Add Protocol.md with information on host / firmware communication
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2016-10-19 13:35:49 -04:00
da7d8dbcac
docs: Add todo list to documentation
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2016-10-12 10:06:18 -04:00
f582a36e4d
Initial commit of source code.
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2016-05-25 11:37:40 -04:00
Kevin O'Connor