Commit Graph

966 Commits

Author SHA1 Message Date
Kevin O'Connor 55d1c3728d docs: Note that i2c is not noise resilient in Config_Reference.md
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-06-16 18:38:31 -04:00
bluesforte f55b9d3e57 mpu9250: Adding support for MPU-9250 (and MPU-6050) accelerometer
Add support for mpu9250 accelerometer over I2C bus.

Signed-off-by: Harry Beyel <harry3b9@gmail.com>
2022-06-16 11:09:33 -04:00
Kevin O'Connor b9e195f098 flash_usb: Use hexid "2e8a:0003" for rp2040 already in bootloader mode
Use a USB hex id to indicate that the device is already in bootloader
mode.  This makes the rp2040 flashing code similar to the other
boards.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-06-16 10:59:11 -04:00
Kevin O'Connor ea4f6d6a77 rp2040: Implement workaround for USB errata "rp2040-e5"
The rp2040 USB may not connect after a reset.  Implementation the
recommended workaround.

Signed-off-by: Lasse Dalegaard <dalegaard@gmail.com>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-06-12 11:25:57 -04:00
Yifei Ding 9047702a00 mkdocs: Replace TOC in Translations
Signed-off-by: Yifei Ding<yifeiding@protonmail.com>
2022-06-03 19:14:13 -04:00
Stefan Dej 7c8cf7661b docs: fix typo in Exclude_Object.md
Signed-off-by: Stefan Dej <meteyou@gmail.com>
2022-06-03 18:11:35 -04:00
Frank Tackitt 638cd4d781 docs: add exclude_object documentation
Also include sample macros to add M486 compatibility.

Signed-off-by: Franklyn Tackitt <git@frank.af>
Co-authored-by: Troy Jacobson <troy.d.jacobson@gmail.com>
2022-06-03 14:12:04 -04:00
Pedro Lamas c16eab212e virtual_sdcard: Adds on_error_gcode
Signed-off-by: Pedro Lamas <pedrolamas@gmail.com>
2022-06-03 11:26:34 -04:00
Mikkel Schmidt af38d708cb
adxl345: Support recording data from multiple ADXL345's in one run, and more. (#5224)
Add PROBE and CHIP to TEST_RESONANCES

Since it's possible to specify more than one chip
in TEST_RESONANCES the CHIP parameter has been
renamed to CHIPS

Signed-off-by: Mikkel Schmidt <mikkel.schmidt@gmail.com>
2022-05-23 19:56:58 -04:00
Kevin O'Connor c7e0372c5d docs: Line wrapping in G-Codes.md
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-05-23 15:50:43 -04:00
Kevin Nguyen 3081899883
docs: Documentation on screws_tilt_calculate MAX_DEVIATION parameter (#5522)
Signed-off-by: Kevin Nguyen <ngynkvn@gmail.com>
2022-05-23 15:49:59 -04:00
camerony f1c6f76a51
docs: Update Config_Reference.md z_hop speed (#5514)
The default z-hop speed is actually 15 mm/s according to the code in safe_z_home.py

Signed-off-by: Cameron River <camerony@gmail.com>
2022-05-23 15:05:53 -04:00
th33xitus bbb06a014b docs: fix links to Config_Reference.md
Signed-off-by: Dominik Willner <th33xitus@gmail.com>
2022-05-18 12:05:28 -04:00
Kevin O'Connor 1c18265a62 docs: Minor wording update to Code_Overview.md
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-05-17 11:55:17 -04:00
Kevin O'Connor e8dc44a0ca docs: Update Code_Overview.md with more realistic task timing guidelines
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-05-17 11:46:38 -04:00
Kevin O'Connor 95676343db docs: Updates to Installation.md document
Recommend users obtain an example config file prior to starting the
installation.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-05-17 11:36:36 -04:00
Kevin O'Connor be4b8b17f2 docs: Minor CanBoot documentation fixes
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-05-10 11:55:06 -04:00
Eric Callahan 95d06c95e3 docs: add CanBoot documentation to bootloaders.md
Signed-off-by:  Eric Callahan <arksine.code@gmail.com>
2022-05-10 11:48:06 -04:00
3-5-20 b44eee609a
docs: Update G-Codes.md (#5487)
Typo correction: my -> by

Signed-off-by: Oscar Cetnarowski <0.007954545@proton.me>
2022-05-09 22:20:06 -04:00
Kevin O'Connor 661f5b08c8 docs: Fix typo in Benchmarks.md
Reported by @kaidegit.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-05-06 14:54:50 -04:00
Kevin O'Connor c4232bea2e docs: Note pins used for stm32flash in Bootloaders.md
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-05-04 13:54:42 -04:00
Kevin O'Connor 722ad4a1d2 docs: Update Example_Configs.md to note that baud should be 250000
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-04-30 14:51:14 -04:00
Kevin O'Connor e43fd4fab0 docs: Note to run DELTA_CALIBRATE before DELTA_ANALYZE in Delta_Calibrate.md
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-04-29 13:58:05 -04:00
Kevin O'Connor 1eb6afdbe5 docs: List only micro-controller names in benchmarks table in Features.md
There is concern that some users are interpreting the benchmark table
in Features.md as a list of "supported boards" or possibly
"recommended boards".  This was not the intent.

Remove the board names from the list to make it more clear the intent
is only to describe the benchmarks.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-04-29 12:20:41 -04:00
Kevin O'Connor 07a90902a5 docs: Improve wording of screws_tilt_adjust in Config_Reference.md
Reported by @JamesH1978.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-04-23 21:22:02 -04:00
Kevin O'Connor a02da85101 docs: Fix typo in query_adc section of G-Codes.md
Reported by @jakep82.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-04-21 19:20:46 -04:00
Kevin O'Connor 5f0885958d neopixel: Support chains with a mix of color_order
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-04-18 10:16:10 -04:00
alstoepp 44567879f6
stm32: Add STM32F072 16KiB bootloader option (#5404)
Signed-off-by: Alexander Stöpperger <a.stoepperger@gmx-topmail.de>
2022-04-13 11:22:04 -04:00
Kevin O'Connor 4a8a76ead8 docs: Update temperature_fan PID documentation in Config_Reference.md
Reported by @dewi-ny-je.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-04-11 11:46:24 -04:00
Karl Bowden 5d82be2f5d
docs: Add link to linux mcu neopixels config docs (#5402)
The reference to the linux mcu was helpful to understand what a linux mcu was but didn't help with understanding the technical reasons why it's not supported.

Signed-off-by: Karl Bowden <karl@bearded.sexy>
2022-04-11 10:35:38 -04:00
Kevin O'Connor 4d4c8d8f94 docs: Add link to Moonraker in API_Server.md
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-04-09 19:32:38 -04:00
Kevin O'Connor 6e61e47a23 docs: Fix smarteffector link in G-Codes.md
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-04-09 19:13:30 -04:00
Kevin O'Connor 05330fd3e5 docs: Minor updates to SmartEffector docs
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-04-09 19:10:16 -04:00
Dmitry Butyugin 2060a6908f smart_effector: Config and command reference
Signed-off-by: Dmitry Butyugin <dmbutyugin@google.com>
2022-04-09 19:04:57 -04:00
cbc02009 f3b995227a
docster: Fix incorrect default value for max_freq 2022-04-09 16:31:23 -04:00
Kevin O'Connor 7c5b7191c3 docs: Update wording of "quality improvement" section of CONTRIBUTING.md
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-04-08 09:56:22 -04:00
Kevin O'Connor 5a409d5d31 docs: Provide more information on PID in Config_Reference.md
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-04-07 12:30:02 -04:00
Kevin O'Connor 647a1cd8ca temperature_fan: Remove deprecated pid_integral_max option
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-04-07 12:10:48 -04:00
Kevin O'Connor 555ac58a3f pca9632: Add support for configurable color_order
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-04-07 11:48:25 -04:00
Kevin O'Connor f0700c0985 pca9632: Support using hardware I2C
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-04-07 11:43:52 -04:00
Yifei Ding 61792e3e31 _klipper3d: Specify mkdocs language config options
Signed-off-by: Yifei Ding <yifeiding@protonmail.com>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-04-06 19:04:48 -04:00
Yifei Ding b35b6cb10b _klipper3d: New language translation deployment
Signed-off-by: Yifei Ding <yifeiding@protonmail.com>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-04-06 19:04:48 -04:00
Kevin O'Connor 444d209cce _klipper3d: Remove translation stubs
Support for language translations on the klipper3d.org site was
disabled in commit c067d4df.  Fully remove the support in this commit.
This is in preparation for an alternate implementation.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-04-06 19:04:48 -04:00
Kevin O'Connor dc7b02f329 neopixel: Support arbitrary RGBW strings in color_order config
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-04-06 09:27:36 -04:00
Kevin O'Connor 92de6e91dc docs: Note that "minutes" in screws_tilt_adjust means minutes of a clock face
Reported by @kubik369 and @Sineos.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-04-05 20:35:56 -04:00
Kevin O'Connor e6bfc4c9aa led: Support setting display_template parameters via SET_LED_TEMPLATE
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-03-31 13:08:12 -04:00
Kevin O'Connor 1ab3ac39e4 led: Support automated LED updates based on display_template results
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-03-31 13:08:12 -04:00
Kevin O'Connor 35ff49e546 docs: Note that neopixel doesn't work on "linux mcu"
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-03-31 13:08:12 -04:00
Kevin O'Connor a7f69caa37 docs: Note change to neopixel/dotstar API status fields
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-03-31 13:08:12 -04:00
Kevin O'Connor 96795def9c led: Add support for PWM controlled LEDs
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-03-31 13:08:12 -04:00