3diy
/
klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
3,559 Commits 1 Branch 0 Tags 27 MiB
Commit Graph

648 Commits

Author SHA1 Message Date
Kevin O'Connor 6bd78ecee4 docs: Update Contact.md to clarify use of mailing list 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-02-05 19:01:17 -05:00
Alan Lord 7d4df65920
ds18b20: new module for 1-wire temperature sensor (#3462) 
Initial commit of code to support 1-wire (Dallas) sensors such
as the DS18B20. Requires Linux kernel drivers to create a file
in /sysfs which is read by this module, and temperature
typically returned to a temperature_fan.

Signed-off-by: Alan Lord <alanslists@gmail.com>
Signed-off-by: Josh Headapohl <joshhead@gmail.com>
 2021-02-02 14:34:56 -05:00
Lane Roberts 19397a0a2b
temperature_fan: Add MAX_SPEED and MIN_SPEED to SET_TEMPERATURE_FAN_TARGET command (#3873) 
Allows setting min_speed and max_speed at runtime, rather than updating the config and restarting.

Signed-off-by Lane Roberts <nolatari@vandarin.net>
 2021-02-02 14:30:04 -05:00
Dmitry Butyugin b45b0162bf docs: Some clarifications for resonances measurements and tuning 
Signed-off-by: Dmitry Butyugin <dmbutyugin@google.com>
 2021-02-02 14:13:24 -05:00
Dmitry Butyugin d136b1e41a resonance_tester: Increase test max_accel to 10K and max_freq to 133 Hz 
Signed-off-by: Dmitry Butyugin <dmbutyugin@google.com>
 2021-02-02 14:13:24 -05:00
Dmitry Butyugin a8b282d67a resonance_tester: Disable input shaping for resonance testing 
Signed-off-by: Dmitry Butyugin <dmbutyugin@google.com>
 2021-02-02 14:13:24 -05:00
Dmitry Butyugin 0fb2449be0 adxl345: Add accelerometer chip name to the raw data file name 
Signed-off-by: Dmitry Butyugin <dmbutyugin@google.com>
 2021-02-02 14:13:24 -05:00
Thomas Kroll 60e4cddf36 hd44780: Add hd44780 protocol init config 
LDO OLED needs a different init string.

Fixes: #3722
Signed-off-by: Thomas Kroll <t.kroll@outlook.com>
 2021-01-31 19:35:40 -05:00
Kevin O'Connor 58cd8da5d1 docs: Updates to Contact.md and use of github issues 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-01-31 19:13:47 -05:00
Kevin O'Connor c9420ee3c0 docs: Add a link in Overview.md to Bed_Mesh.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-01-24 10:47:15 -05:00
Jarad Olson b32166c8a0
Docs: resonance testing fixup (#3804) 
Chip names are now correct for bed slingers.
Added some notes about testing with >1 chip

Signed-off-by: Jarad Olson <brotherdust@gmail.com>
 2021-01-24 10:22:18 -05:00
Kevin O'Connor 8cc1d84180 configfile: Add printer.configfile.settings command template parameter 
Make available the parsed value (or default value) for config options
to command templates and to the api server.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-01-20 16:25:25 -05:00
Kevin O'Connor 8a6619d18e mcu: Add a get_status() callback with micro-controller info and stats 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-01-19 23:12:41 -05:00
Kevin O'Connor ef40e71fe1 docs: Minor reword to Rotation_Distance.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-01-10 11:09:45 -05:00
Kevin O'Connor 2ae732a13a docs: Note the BMG extruder is actually 50:17 and not 3:1 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-01-10 10:59:43 -05:00
Janar Sööt e68cf08d15 kinematics: report all axis limits (min/max) 
Signed-off-by: Janar Sööt <janar.soot@gmail.com>
 2020-12-28 10:19:57 -05:00
Justin Schuh a5ebe5825a
heaters: Make MINIMUM optional for TEMPERATURE_WAIT command (#3674) 
Signed-off-by: Justin Schuh <code@justinschuh.com>
 2020-12-24 11:34:26 -05:00
Justin Schuh 1a9218532b heaters: Add MAXIMUM option to TEMPERATURE_WAIT command 
Signed-off-by: Justin Schuh <code@justinschuh.com>
 2020-12-23 18:16:46 -05:00
Kevin O'Connor ac98d0ea7e docs: Note step_distance deprecated in Config_Changes.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-12-22 19:56:36 -05:00
Dmitry Butyugin ab93ee9293 docs: Limiting max_smoothing for input shaper autocalibration 
Signed-off-by: Dmitry Butyugin <dmbutyugin@google.com>
 2020-12-22 18:37:41 -05:00
Kevin O'Connor a59461e20e docs: Minor formatting change to Rotation_Distance.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-12-21 18:37:04 -05:00
Kevin O'Connor ec1bd77cc2 docs: Fix klipper3d.org rendering of Rotation_Distance.md 
The Jeykll rendering doesn't like block quoted text that wraps lines.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-12-21 18:04:47 -05:00
Kevin O'Connor 5b31080e77 docs: Add a Rotation_Distance.md document 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-12-18 10:30:32 -05:00
Kevin O'Connor 96eba9f2df endstop_phase: Obtain phases directly from stepper microsteps config 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-12-18 10:30:32 -05:00
Kevin O'Connor 7dcc778b6c stepper: Calculate step_distance from rotation_distance 
Add support for automatically calculating the internal step_distance
from new config parameters - rotation_distance, microsteps,
full_steps_per_rotation, and gear_ratio.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-12-18 10:30:32 -05:00
Dmitry Butyugin 4a41d228eb
docs: Input Shaper and Resonances docs improvements (#3627) 
Signed-off-by: Dmitry Butyugin <dmbutyugin@google.com>
 2020-12-17 17:44:46 -05:00
Stefan Dej 77add95675
heaters: add last pwm value to heater.get_status (#3621) 
Signed-off-by: Stefan Dej <meteyou@gmail.com>
 2020-12-13 20:08:16 -05:00
Kevin O'Connor 43a6d18f13 docs: Fix board_pins link in Config_Changes.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-12-13 12:36:14 -05:00
Kevin O'Connor 89183edbda manual_probe: Use configfile note_valid=False when inspecting Z position_endstop 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-12-13 10:41:40 -05:00
Kevin O'Connor 2d6b44152a bltouch: Recommend using a pullup on the sensor_pin 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-12-11 11:01:44 -05:00
Kevin O'Connor f3c5be0f00 gpiocmds: Merge digital output and soft pwm code 
The digital output commands implement a subset of the software pwm
commands.  Change the host code to just use the software pwm commands
and simplify the micro-controller code.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-12-10 12:06:26 -05:00
Kevin O'Connor a1baefc2c2 temperature_mcu: Add enhanced support for monitoring mcu temperature 
Add a "temperature_mcu" tool that can monitor builtin micro-controller
temperature sensors.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-12-10 02:39:06 -05:00
Kevin O'Connor 6bbfc869a1 docs: Improve spi and i2c description in Config_Reference.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-12-08 08:53:18 -05:00
Kevin O'Connor 6fe2ee0380 docs: Minor wording change to thermistors in Config_Reference.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-12-07 12:12:21 -05:00
Kevin O'Connor e83801daab heaters: Add a TEMPERATURE_WAIT command 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-12-07 09:57:13 -05:00
Kevin O'Connor 654cbeb286 docs: Group temperature sensors together in Config_Reference.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-12-05 18:16:20 -05:00
Kevin O'Connor fc8ac8fe25 docs: Move micro-controller information together in Config_Reference.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-12-05 14:39:37 -05:00
Kevin O'Connor 19a96346a8 gpiocmds: Use move queue for software pwm 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-12-04 16:10:13 -05:00
Pascal Pieper 9cdf9bb6ec gpiocmds: Use move queue for digital output pins 
Signed-off-by: Pascal Pieper <accounts@pascalpieper.de>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-12-04 16:10:13 -05:00
Pascal Pieper e8ec1801ff pwmcmds: Use move queue for hard PWM 
Signed-off-by: Pascal Pieper <accounts@pascalpieper.de>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-12-04 16:10:13 -05:00
Kevin O'Connor 086f0fafde gpiocmds: Send soft pwm cycle_time separately from schedule_soft_pwm_out 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-12-04 16:10:13 -05:00
Kevin O'Connor 21a3a8559d docs: Add indentation to generated table-of-contents on klipper3d.org site 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-12-03 19:24:40 -05:00
Kevin O'Connor 1f9516ad7f docs: Simplify javascript link modification for external references 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-12-03 18:44:31 -05:00
Kevin O'Connor 14952ccef5 docs: Add links to default display.cfg and menu.cfg in Config_Reference.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-12-03 18:11:29 -05:00
Kevin O'Connor 6e48ee537f docs: Fix "github pages" rendering of pictures in Resonance_Compensation.md 
The "github pages" service wont properly render a table with
"|:--:|:--:|" and no table contents.  In contrast, normal github
markdown contents wont show the table without it.  For now, remove the
line as the normal github markdown contens look okay even if the
content isn't rendered as a table.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-12-03 15:27:38 -05:00
Kevin O'Connor 1f2d9c051c docs: Use relative links for files outside the docs/ directory 
Use javascript to fixup the "github pages" rendering of links to files
outside the docs/ directory.  Then use normal relative links in the
documentation.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-12-03 15:06:58 -05:00
Kevin O'Connor a2d1e03b91 docs: Yet again try to fix github-pages rendering of Command_Templates.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-12-03 12:41:47 -05:00
Kevin O'Connor 23f547169c rpi_temperature: Don't read min_temp/max_temp directly from config 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-12-03 12:37:56 -05:00
Al b911db4c0d
rpi_temperature: New module to monitor RPi temperature (#3587) 
Module to monitor RPi cpu temperature

Signed-off-by: Al Crate <aleph@al3ph.org>
 2020-12-03 12:35:37 -05:00
Kevin O'Connor a1ae548766 docs: Fix github-pages rendering of Command_Templates.md (again) 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-12-03 12:28:35 -05:00