3diy
/
klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
2,375 Commits 1 Branch 0 Tags 27 MiB
Commit Graph

531 Commits

Author SHA1 Message Date
Kevin O'Connor 4ec6db7a87 stm32: Add support for additional ADC3 ports on stm32f4 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-08-15 23:21:41 -04:00
Kevin O'Connor aac51bdb0a stm32: Initial support for USB On-The-Go (OTG) driver on stm32f4 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-08-15 22:26:49 -04:00
Kevin O'Connor 841150ff00 stm32: Enable 48Mhz USB clock on stm32f446 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-08-14 19:33:11 -04:00
Kevin O'Connor effe6f6ddd lcd_st7920: Add brief delay around gpio toggle calls on fast MCUs 
On fast MCUs (like the SAMD51) it is possible for the gpio to toggle
faster than the st7920 can accept.  Add a small delay around the clock
rise signal.

Signed-off-by: Lars R. Hansen <popshansen@hotmail.com>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-08-10 11:45:15 -04:00
Kevin O'Connor a70055a625 stm32: Add support for the 32KiB bootloader on the SKR Pro 
Signed-off-by: Gerrit Sturm <gsturm16@gmail.com>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-08-09 20:37:31 -04:00
Kevin O'Connor 96ff54e143 stm32: Add serial USART serial port option for port PD9/PD8 
Signed-off-by: Gerrit Sturm <gsturm16@gmail.com>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-08-09 20:32:46 -04:00
Kevin O'Connor f6d1ab2ea2 neopixel: Rework timing so that it works on AVR micro-controllers 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-08-07 15:37:05 -04:00
Kevin O'Connor 8712648370 stm32: Fix memory sizing for STM32F405/7 chips 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-08-06 23:35:45 -04:00
Kevin O'Connor c2a08962b7 spicmds: Rework spi config commands 
Rework the spi_config commands so that bus configuration and shutdown
message configuration is done separately from the main "config_spi"
command.  This makes the spi configuration more flexible.  It's now
possible to use software spi without a CS pin.  It's now possible to
define multiple SPI messages to send on a shutdown event.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-08-06 18:56:53 -04:00
Kevin O'Connor 3d0f7188df stm32: Automatically disable SWD if PA13/PA14 is used on stm32f103 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-08-05 11:39:42 -04:00
Kevin O'Connor 36217f27aa stm32f1: Remove now unused src/stm32f1/ directory 
Now that the stm32f1 code has been merged into the stm32 code, there
is no longer a need to keep the stm32f1/ directory.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-08-05 11:25:40 -04:00
Kevin O'Connor fe065d72d0 stm32: Rename clock.c to stm32f4.c 
Rename the clock.c file to stm32f4.c to make it more clear that the
code is specific to the stm32f4 chips.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-08-05 11:25:40 -04:00
Kevin O'Connor 8b9cc62359 stm32: Rename stm32f4/ directory to stm32/ 
Now that the code in stm32f4/ can handle both stm32f1 and stm32f4
chips, rename the directory to just "stm32".

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-08-05 11:25:40 -04:00
Kevin O'Connor ec3d865b51 stm32f4: Add support for USB on stm32f103 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-08-05 11:25:40 -04:00
Kevin O'Connor 7efc53ff59 stm32f4: Add support for STM32F103 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-08-05 11:25:40 -04:00
Kevin O'Connor c176b66f29 stm32f4: Allow the USART serial port to be configured 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-07-28 22:55:48 -04:00
Kevin O'Connor e6ffef9a9f stm32f4: Make using the internal clock source a low level option 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-07-28 22:55:48 -04:00
Kevin O'Connor 9bc3a29ee4 stm32f4: Add support for full range of GPIO pins 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-07-28 22:55:48 -04:00
Kevin O'Connor bc9c8cd7a0 stm32f4: Only enable peripherals once 
Add is_enabled_pclock() and only initialize spi and adc once during
configuration.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-07-28 17:57:02 -04:00
Kevin O'Connor ef0784afe6 stm32f4: Encode mode/func into single parameter of gpio_peripheral 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-07-28 11:32:56 -04:00
Kevin O'Connor 92c2fbdce4 armcm_timer: Improve comments on wrap_timer code 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-07-27 22:05:50 -04:00
Kevin O'Connor 7bc0a261ab stm32f4: Automatically calculate dynmem start/end 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-07-27 21:32:04 -04:00
Kevin O'Connor 16616662ed stm32f4: Add Kconfig build rules for STM32F405/7 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-07-27 21:32:04 -04:00
Kevin O'Connor 961d13ee1a stm32f4: Add support for SPI 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-07-27 21:01:01 -04:00
Kevin O'Connor d79f99b188 stm32f4: Add support for ADC 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-07-27 10:58:28 -04:00
Kevin O'Connor 73709984b0 stm32f4: Add support for watchdog 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-07-26 08:36:11 -04:00
Kevin O'Connor 899b6726fa stm32f4: Improve serial baud rate calculation 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-07-26 08:01:31 -04:00
Kevin O'Connor f3d7287a28 stm32f4: Add support for external 8Mhz crystal 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-07-26 07:51:12 -04:00
Kevin O'Connor 1487f8a257 stm32f4: Add support for GPIO 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-07-25 18:13:06 -04:00
Kevin O'Connor d501ca6b0b stm32f4: Add initial support for STM32F446 chip 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-07-25 18:08:28 -04:00
Kevin O'Connor 52dd6f0b57 atsamd: Fix comment typo in serial.c 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-07-25 12:18:21 -04:00
Kevin O'Connor 634ec46813 initial_pins: Only build when CONFIG_HAVE_GPIO is enabled 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-07-24 01:09:45 -04:00
Kevin O'Connor 79bd13dba7 armcm_timer: Support micro-controllers faster than 160Mhz 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-07-24 01:08:18 -04:00
Kevin O'Connor 4e5ddff00b neopixel: Update to more flexible bit-banging timing 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-07-23 22:00:12 -04:00
Kevin O'Connor 893acdb56b lib: Update stm32f1 code to version 1.8.0 
Update the stm32f1 code to the latest from ST.  Merge the
lib/cmsis-stm32f1/ and lib/hal-stm32f1/ into a single lib/stm32f1/
directory.  Document all the differences from the pristine upstream
code.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-07-21 22:40:56 -04:00
Kevin O'Connor 1a387ad509 stm32f0: Remove trailing tab from Makefile 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-07-21 21:49:22 -04:00
Kevin O'Connor d5cc2a7b7b neopixel: Improve timing of gpio bit-banging 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-07-17 16:36:28 -04:00
Kevin O'Connor 0af5b9ff6d neopixel: Be sure to set the line low on a failed write 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-07-13 00:00:57 -04:00
Kevin O'Connor be2d0abbab neopixel: Optimize the update loop 
Optimize the transmit code so it can run on some slower ARM cpus.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-07-12 23:39:00 -04:00
Kevin O'Connor b7bc96c3b2 neopixel: Add initial support for "neopixel" leds 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-07-12 21:44:01 -04:00
Kevin O'Connor 28aa2f507a endstop: Rename mcu end_stop commands to endstop 
Rename the commands.

The main reason for this change is to force a micro-controller code
updated (due to important bugfix in 7fefe52d).

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-07-12 08:10:53 -04:00
Kevin O'Connor 7fefe52df7 stepper: Don't update SF_LAST_DIR if SF_NEED_RESET 
If the move is not added to the move queue, then the SF_LAST_DIR
setting must not be changed.  Otherwise, it could result in an
incorrect direction being set on the stepper after a homing operation.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-07-12 07:54:24 -04:00
Kevin O'Connor b77375e955 lpc176x: Reset LPC_UART0->FDR when using serial 
The popular "LPC17xx-DFU-Bootloader" alters the LPC_UART0->FDR
register, so be sure to reset it back to its default when using serial
in Klipper.

Reported by @b-vs.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-07-10 20:00:58 -04:00
Arksine 0f1d42466b buttons: initialize mcu buttons based on inverted state 
Signed-off-by:  Eric Callahan <arksine.code@gmail.com>
 2019-07-05 20:01:07 -04:00
Kevin O'Connor 8951dc3d51 lpc176x: Add more filtering to workaround adc hardware defect 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-06-20 08:57:24 -04:00
Kevin O'Connor 8d029ad652 lpc176x: Fix adc clock divisor 
Commit 1096075d changed CONFIG_CLOCK_FREQ to the actual cpu frequency,
but that commit failed to update adc.c accordingly.  That made the adc
run 4 times slower.  Make the corresponding change to adc.c.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-06-19 21:21:01 -04:00
Kevin O'Connor 700e35c6ac armcm_timer: Unify udelay() implementation 
Move the udelay() code from various arm board directories into the
src/generic/armcm_timer.c code.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-06-09 20:27:57 -04:00
Kevin O'Connor 3910a44cc9 atsam: Add support for "timer" controlled hardware pwm pins 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-06-02 10:59:33 -04:00
Kevin O'Connor e2e4a5d4e6 atsamd: Add build support for SAMD21E15 chip 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-06-01 13:43:37 -04:00
Kevin O'Connor 9e7ef3cf89 atsamd: Reduce the compile size of the hard_pwm pin list 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-05-30 14:05:31 -04:00