46e7027bc7
extruder: Flush step generation on ACTIVATE_EXTRUDER
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-12-17 01:59:06 -05:00
9628d9b1ac
config: Minor wording change in example-extras.cfg
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-12-16 22:54:21 -05:00
7c81a16bd3
config: Update example-extras.cfg - extruder.activate_gcode was removed
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-12-16 21:27:55 -05:00
f4c4de1a24
extruder: Move M104/M140 commands from gcode.py to extruder.py
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-12-16 20:16:21 -05:00
9654816abf
heater_bed: Move M140/M190 commands from gcode.py to heater_bed.py
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-12-16 20:02:48 -05:00
0e2d1a190e
gcode: Rename bg_temp() to wait_for_temperature()
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-12-16 19:21:37 -05:00
665323eb29
heater: Use printer.command_error() instead of internal heater.error()
...
Use the more standard command_error to report invalid temperature
requests.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-12-16 19:16:58 -05:00
254789f4c5
neopixel: Add support for delaying updates in SET_LED command
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-12-15 23:24:17 -05:00
ab5540bd34
config: Add printer-anet-a4-2018.cfg config file
...
Reported by @Alkarasu.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-12-15 22:12:58 -05:00
1d05a34cd7
docs: Update Kinematics.md document with "smooth pressure advance"
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-12-13 17:52:51 -05:00
91bade5824
docs: Update Config_Changes.md with pointer to sample multi extruder configs
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-12-13 12:33:13 -05:00
b1bbe97576
temperature_sensor: Add get_status() function
...
Provide printer.<sensor-config-name>.temperature variable to gcode macro
environment
Signed-off-by: Simon Kühling <mail@simonkuehling.de>
2019-12-13 10:45:04 -05:00
2721211456
heater: Add PrinterHeater get_status() function
...
Provide a list of available heater and sensor names to
gcode macro templates through the printer.heater.available_heaters
and printer.heater.available_sensors variables
Signed-off-by: Simon Kühling <mail@simonkuehling.de>
2019-12-13 10:45:04 -05:00
4cbbe18afd
itersolve: Improve numerical stability of gen_steps_pre_active check
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-12-10 16:44:02 -05:00
04b3603a1e
itersolve: Rename scan_pre/_post to gen_steps_pre/post_active
...
Rename the variables to make it a little more clear what they do.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-12-10 15:53:50 -05:00
cff24b0220
config: Add multi extruder sample files
...
Add sample-multi-extruder.cfg and sample-idex.cfg files.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-12-10 14:24:34 -05:00
fcee27fc19
gcode: Remove builtin T0/T1/T2/... command support
...
The builtin Tn command is not sufficiently flexible to control some
multi-extruder printers. Remove the command and encourage users to
define individual gcode_macros for each Tn instance.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-12-10 14:24:32 -05:00
c06618193d
extruder: Add an ACTIVATE_EXTRUDER command
...
Add support for an extended g-code command to change the currently
active extruder.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-12-10 14:23:13 -05:00
ab2d302b7e
gcode: Remove support for the M206 command
...
The M206 command isn't particularly standardized and isn't issued by
default from 3rd party software in their standard configurations.
Encourage users to use the more powerful SET_GCODE_OFFSET command.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-12-10 14:23:10 -05:00
d1f4f18810
config: Add example for including a parameter in a macro call ( #2251 )
...
Add description to default_parameter of g-code macro description of method to call macro with a non-default value.
Signed-off-by: David Smith <davidosmith@gmail.com>
2019-12-10 14:01:41 -05:00
8663bc8192
docs: Update FAQ to emphasize checking Config_Changes.md on an upgrade
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-12-10 13:51:47 -05:00
205da598fd
docs: Move upgrade instructions to the last item in the FAQ
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-12-10 13:39:49 -05:00
080ee0b512
kin_extruder: Apply pressure advance in kin_extruder.c
...
Implement the pressure advance calculations while performing the
definitive integral calculations. This simplifies both the
extruder.py and kin_extruder.c code.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-12-08 20:41:35 -05:00
730a6d868b
kin_extruder: Move integration code from trapq.c to kin_extruder.c
...
Move the code that calculates the definitive integral to the
kin_extruder.c file.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-12-08 18:30:42 -05:00
8b75bddc0f
test: Add new delta_calibrate test case
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-12-05 14:48:52 -05:00
139274f0bb
mathutil: Propagate errors from background_coordinate_descent()
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-12-05 14:48:52 -05:00
72161d0405
tuning_tower: Fix typo causing tuning tower to break when homing
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-12-04 20:11:54 -05:00
10270dc7ef
docs: Fix another typo in Code_Overview.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-12-04 12:26:45 -05:00
f82a85aad0
docs: Fix typo in Code_Overview.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-12-04 12:17:13 -05:00
e17f2bac96
docs: Minor "coordinate system" wording change to Code_Overview.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-12-04 12:05:31 -05:00
e557f2d0c0
docs: Add information on coordinate systems to Code_Overview.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-12-04 11:09:22 -05:00
98d1fee8ad
tmc5160: PWMCONF is write only
...
Signed-off-by: Petri Honkala <cruwaller@gmail.com>
2019-12-04 09:20:39 -05:00
8f1753c8ce
config: Update "Fysetc Mini 12864Panel" in sample-lcd.cfg
...
Use the more standard "lcd_type: uc1701" and reverse the encoder pins.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-12-04 09:13:46 -05:00
8e296db410
test: Add printer-wanhao-duplicator-i3-mini-2017.cfg to build tests
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-12-03 13:34:46 -05:00
3c526a71f9
config: Basic config for Wanhao Duplicator i3 mini ( #2238 )
...
Signed-off-by: Grant Gordon <grant.gordon@imaginet.co.za>
2019-12-03 13:32:43 -05:00
99a74d9f07
tmc2130: use local variable instead of global Registers in MCU_TMC_SPI
...
Signed-off-by: Petri Honkala <cruwaller@gmail.com>
2019-12-03 12:06:37 -05:00
e310e5f0e8
uc1701: Add a delay after reset toggle (for displays using ResetHelper)
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-12-03 11:13:54 -05:00
988ee5754e
itersolve: Fix potential backwards time in itersolve_gen_steps_range()
...
Make sure that a newly choosen "high" bound is always greater than the
"low" bound.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-12-02 23:56:42 -05:00
a8ad1ae726
screws_tilt_adjust: Remove check for probe printer object
...
The probe object may not have be instantiated when the
screws_tilt_adjust object is instantiated. Just remove the check.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-12-02 20:06:04 -05:00
8e87ab0939
gcode: Remove support for "G4 S1" style commands
...
The S parameter is not a standard and was not commonly used. The P
parameter (delay specified in milliseconds) is the commonly accepted
g-code mechanism for dwelling.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-12-02 19:31:20 -05:00
2d97e0e218
uc1701: Add support for rst_pin
...
Add support for an optional uc1701 rst_pin. Use the same reset pin
code handling with the SSD1306 code.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-12-02 10:25:30 -05:00
2e7f38eadd
hd44780: Use two separate text framebuffers
...
There is concern that some lcd boards that emulate the hd44780 don't
support text updates that wrap the two text framebuffers. Update the
code to treat the two text areas as two separate framebuffers.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-12-01 19:18:52 -05:00
41dd53f62c
config: fixes in anycubic delta plus default config file ( #2176 )
...
Signed-off-by: Jakub Kruszona-Zawadzki <acid@moosefs.com>
2019-12-01 18:51:46 -05:00
43bb45a1d3
docs: Minor update to Config_Changes.md
...
Use same "ls /dev/serial/by-id/*" command used in Installation.md.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-12-01 14:25:40 -05:00
935088ddff
docs: Clarify recent usb device name change in Config_Changes.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-12-01 10:29:15 -05:00
7bd96950cb
config: Minor comment changes to example-extras.cfg
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-11-28 10:34:59 -05:00
73e84abaff
atsam: Fix typo causing chipid to not be fully read
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-11-27 14:33:20 -05:00
ef2c7cb363
stm32: Fix typo in setting of SMPR1 register on stm32f103
...
Only the stm32f4 has a SMP18 field; it's not present on the stm32f103.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-11-27 11:26:17 -05:00
fc476f22b6
stm32: Fix typo in adc startup delay
...
Fix (harmless) typo and add comments on adc timing.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-11-27 11:16:41 -05:00
8d93d1a8ef
uc1701: add config option for sh1106 type with up to 132 columns.
...
Signed-off-by: Matt Baker <baker.matt.j@gmail.com>
2019-11-26 19:40:39 -05:00
Kevin O'Connor