3diy
/
klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
5,175 Commits 1 Branch 0 Tags 27 MiB
Commit Graph

43 Commits

Author SHA1 Message Date
Pedro Lamas 6676c1df86 gcode: expose status with available commands 
Signed-off-by: Pedro Lamas <pedrolamas@gmail.com>
 2023-12-11 11:51:51 -05:00
Kevin O'Connor 29b7550ce5 pwm_tool: Add support for high-speed PWM pin updates 
The output_pin module is only capable of updating an output pin at
most once every 100ms.  Add a new pwm_tool module that is capable of
queuing updates in the micro-controller and thus allowing for much
higher update rates.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2023-11-16 22:07:15 -05:00
Pedro Lamas ed66982b8e heaters: adds temperature monitors 
Signed-off-by: Pedro Lamas <pedrolamas@gmail.com>
 2023-08-01 20:32:03 -04:00
Michael Jäger 6f7c743615
temperature_combined: A class that can combine several other temperature sensors (#6230) 
Signed-off-by: Michael Jäger <michael@mjaeger.eu>
 2023-08-01 13:18:03 -04:00
Dmitry Butyugin 36be1cfc51
idex_modes: COPY and MIRROR mode implementation (#6297) 
COPY and MIRROR mode implementation

Correctly apply input shaper params to new dual_carriage

Added SAVE_/RESTORE_IDEX_STATE commands

Documentation updates for the new IDEX modes

Signed-off-by: Dmitry Butyugin <dmbutyugin@google.com>
 2023-08-01 12:23:52 -04:00
Stefan Dej ea330717cd screws_tilt_adjust: add max_deviation to report status 
Signed-off-by: Stefan Dej <meteyou@gmail.com>
 2023-08-01 12:14:15 -04:00
Chris 7511151ac9
docs: Add gcode_button to the Status Reference docs (#6201) 
Add gcode_button to the Status Reference docs

Signed-off-by: Chris Laprade <chris@rootiest.com>
 2023-05-14 10:19:42 -04:00
Kevin O'Connor 83308a1051 tmc: Support reporting tmc2240 temperature in driver get_status() 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2023-04-07 15:20:40 -04:00
Pedro Lamas 87f109984a probe: expose name on status report 
Signed-off-by: Pedro Lamas <pedrolamas@gmail.com>
 2023-03-14 21:11:33 -04:00
Pedro Lamas 4b5d056421 stepper_enable: report status 
Signed-off-by: Pedro Lamas <pedrolamas@gmail.com>
 2023-02-13 12:16:17 -05:00
Pedro Lamas da8d4b0231 extruder: store currently sync'ed motion queue name 
Signed-off-by: Pedro Lamas <pedrolamas@gmail.com>
 2023-02-09 16:51:47 -05:00
Pedro Lamas fa78e6b8fb screws_tilt_adjust: status result as dictionary 
Signed-off-by: Pedro Lamas <pedrolamas@gmail.com>
 2023-02-03 18:16:19 -05:00
theophile 2a25733cd8
screws_tilt_adjust: Add get_status() method (#5921) 
Signed-off-by: Christopher Meredith <chmeredith@gmail.com>
 2022-12-17 11:39:25 -05:00
Stefan Dej b0ffb269d2
print_stats: add `SET_PRINT_STATS_INFO` G-Code for pass slicer variables to Klipper (#5726) 
This adds a gcode command that can be used insight the slicer to pass the total layer count and current layer information.

Signed-off-by: Stefan Dej <meteyou@gmail.com>
 2022-10-05 15:02:28 -04:00
alchemyEngine 34870d3e2a
z_thermal_adjust: Add Z thermal adjuster module (#4157) 
Use a frame-coupled temperature probe to compensate for thermal
expansion in real-time.

Signed-off by: Robert Pazdzior <robertp@norbital.com>
 2022-09-25 12:39:14 -04:00
Dmitry Butyugin 5d9ff75d02 extruder_stepper: Support configuring pressure advance from config 
Also added status report for extruder_stepper objects with the
current pressure advance parameters values.

Signed-off-by: Dmitry Butyugin <dmbutyugin@google.com>
 2022-09-01 14:53:12 -04:00
Nitram 6a91824486
delta: Added the possibility to get where the "cone shape" of the build volume starts from Macros (#5662) 
Added the possibility to get where the "cone shape" of the build volume starts from Macros

Signed-off-by: Martin Malmqvist <Volcomosq@gmx.com>
 2022-08-19 13:27:44 -04:00
Pedro Lamas b725d971db bed_screws: report status 
Signed-off-by: Pedro Lamas <pedrolamas@gmail.com>
 2022-07-28 20:43:19 -04:00
Pedro Lamas 282d1113e4 manual_probe: report status 
Signed-off-by: Pedro Lamas <pedrolamas@gmail.com>
 2022-07-21 22:03:31 -04:00
Kurt Haenen f2a5800cea
configfile: Expose options awaiting to be saved (#5270) 
Adds a save_config_pending_items to the status reported by
configfile reflecting the items and values that a future
SAVE_CONFIG would actually persist.

Signed-off-by: Kurt Haenen <kurt.haenen@gmail.com>
 2022-06-20 12:10:57 -04:00
Frank Tackitt 638cd4d781 docs: add exclude_object documentation 
Also include sample macros to add M486 compatibility.

Signed-off-by: Franklyn Tackitt <git@frank.af>
Co-authored-by: Troy Jacobson <troy.d.jacobson@gmail.com>
 2022-06-03 14:12:04 -04:00
Kevin O'Connor a7f69caa37 docs: Note change to neopixel/dotstar API status fields 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-03-31 13:08:12 -04:00
Kevin O'Connor 1b08553a42 angle: Report tle5012b temperature 
Export the tle5012b temperature readings when performing measurements.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-03-29 20:34:46 -04:00
Misterke 8b0c6fcb08 bed_mesh: Report actual mesh profiles as status 
Report the actual profiles available via BED_MESH_PROFILE
via the status for use by clients.

Signed-off-by: Kurt Haenen <kurt.haenen@gmail.com>
 2022-02-16 13:42:19 -05:00
Yifei Ding 98af5dffe6
docs: Improve filament width sensor documentation (#5058) 
Add Filament Width Sensor to G-Codes.md

Remove Redundant Filament Width Sensor Entries

Remove Duplicate Status Reference In Hall Filament Width Sensor

Fix Indentation For Filament Width Sensors

Signed-off-by: Yifei Ding<yifeiding@protonmail.com>
 2021-12-27 12:41:31 -05:00
Yifei Ding c0ea48a582 docs: Match Single Blank Line Above and Below A Title 
Signed-off-by: Yifei Ding <yifeiding@protonmail.com>
 2021-11-19 10:25:06 -05:00
Philipp Temminghoff 64e4649877
tmc: add current values to get_status() (#4696) 
Signed-off-by: Philipp Temminghoff <philipptemminghoff@gmail.com>
 2021-10-11 12:03:08 -04:00
Kevin O'Connor 46167cae67 configfile: Add support for reporting deprecated options 
Add a new printer.configfile.warnings with a list of config features
that are deprecated.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-09-16 13:44:54 -04:00
Kevin O'Connor 5fd1c9853d tmc: Add support for a get_status() method 
Export mcu_phase_offset and drv_status information.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-08-30 12:00:46 -04:00
Matt Heath df98470659 docs: Fix reference to neopixel color_data 
Fix reference to neopixel color_data in status reference documentation
so the given example works as expected.

Signed-off-by: Matt Heath <hello@mattheath.com>
 2021-08-17 14:43:51 -04:00
Kevin O'Connor 60aa05829f motion_report: Add get_status() method with current requested toolhead position 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-07-29 16:53:32 -04:00
Damien cff61605fb docs : make modifications to all md files to make them compatible with mkdocs 
all markdown files must have a single H1 heading at the top.

Signed-off-by: Damien Martin <damlobster@gmail.com>

Update CNAME
 2021-07-27 13:15:25 -04:00
Tircown 4d559633e3
kinematics: Add dual_carriage to hybrid-corexyz (#4296) 
- Add dual_carriage abilities for hybrid-corexy and hybrid-corexz
- Introduce the module idex_mode
- Fix add_stepper to the correct rail in hybrid-corexy

Signed-off-by: Fabrice GALLET <tircown@gmail.com>
 2021-06-27 18:37:05 -04:00
Kamil Trzcinski f1091a484b virtual_sdcard: add `file_path` and `file_size` to `status` 
This provides a comprehensive information if currently
we have a file loaded.

Signed-off-by: Kamil Trzcinski <ayufan@ayufan.eu>
 2021-06-22 15:15:03 -04:00
Eric Callahan 8bcfaa53aa docs: add status documentaton for neopixel and dotstar 
Signed-off-by:  Eric Callahan <arksine.code@gmail.com>
 2021-06-18 10:53:12 -04:00
Kamil Trzcinski d2c2aaf55d extruder: expose `can_extrude` flag based on temperature 
Sometimes an automated filament load is implemented,
but extruder might not always extrude filament.

This adds a flag to check if this operation is possible.

Signed-off-by: Kamil Trzcinski <ayufan@ayufan.eu>
 2021-06-14 12:56:50 -04:00
Kevin O'Connor 93b9a85d19 endstop_phase: Add support for reporting phase information via get_status() 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-06-03 22:27:30 -04:00
Michael Rose 27f8cf025e
z_tilt: expose an 'applied' status to allow macros to skip QGL/Z_TILT_ADJUST (#4313) 
This is useful for macros that'd like to skip QGL if already leveled,
e.g.:

```
    {% if not printer.quad_gantry_level.applied %}
        QUAD_GANTRY_LEVEL
    {% endif %}
```

Signed-off-by: Michael Rose <elementation@gmail.com>
 2021-06-02 11:11:19 -04:00
Kevin O'Connor 8e74e6aa09 docs: Fix typo in Status_Reference.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-05-28 21:02:14 -04:00
Kevin O'Connor 977c334e2e docs: Avoid link descriptions that span multiple lines 
The Jekyll markdown renderer gets confused by links that span multiple
lines.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-05-28 20:58:32 -04:00
Alex Zellner 60352f4b67
filament_motion_sensor: add get_status (#4281) 
Signed-off-by: Alex Zellner <alexander.zellner@googlemail.com>
 2021-05-11 13:17:22 -04:00
Kevin O'Connor ebbb21be00 docs: Update Status_Reference.md for better Jekyll rendering 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-04-28 20:38:07 -04:00
Kevin O'Connor af7f27542f docs: Move status field reference to new Status_Reference.md file 
Move the reference of "printer" status fields from
Command_Templates.md to a new Status_Reference.md file.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-04-28 20:32:00 -04:00