3diy
/
klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
2,458 Commits 1 Branch 0 Tags 27 MiB
Commit Graph

423 Commits

Author SHA1 Message Date
Kevin O'Connor 2b3cd8db7f config: Move sections around in example-extras.cfg 
Move the sections around in example-extras.cfg to try and group like
functionality together.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-09-13 15:32:23 -04:00
Piotr Usewicz dd46e38628 config: Lower bigtreetech-skr-mini-e3 driver voltage (#1955) 
As per 18e6772010

This lowers the voltage and thus brings the stepper motor temperature to
an acceptable level. Beforehand, motors would get very hot.

Signed-off-by: Piotr Usewicz <piotr@layer22.com>
 2019-09-13 12:26:10 -04:00
Kevin O'Connor 1ac5c55359 config: Update bigtreetech-skr-mini-e3 to be more similar to ender3 config 
The SKR mini E3 is marketed as being for the Ender 3, so it makes
sense for the example electronics config to be more similar to the
Ender 3 config.

Reported by @TheDogee.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-09-13 12:19:16 -04:00
Aleksej Vasiljkovic 7d8c70363a gcode_arcs: Add support for G2/G3 commands 
R Still missing, also might be somewhat dirty since code is converted
into G1 commands.

Signed-off-by: Aleksej Vasiljkovic <achmed21@gmail.com>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-09-13 11:57:54 -04:00
Kevin O'Connor 361de30ad1 config: Note adc_voltage and pullup_resistance in adc_temperature module 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-09-11 00:31:48 -04:00
Arksine 49779f13a2 filament_switch_sensor: Add a delay between dispatch of pause and execution of pause gcode 
Signed-off-by:  Eric Callahan <arksine.code@gmail.com>
 2019-09-08 20:42:43 -04:00
Kevin O'Connor 0f1fcb017f config: Add example generic-bigtreetech-skr-pro.cfg config 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-09-05 22:42:48 -04:00
Kevin O'Connor 1e3f6125fb config: Add a description of the EXP1/EXP2 pin locations to sample-lcd.cfg 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-09-01 12:49:28 -04:00
Kevin O'Connor e47fa04a6f config: Add the "Fysetc Mini 12864Panel" to the example lcd configs 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-08-31 22:22:19 -04:00
Kevin O'Connor 04db5f95d2 config: Minor formatting change to sample-lcd.cfg 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-08-31 19:00:52 -04:00
Kevin O'Connor f7f6680bf6 config: Use position_endstop=0 for Creality printers 
The default position_endstop=0.5 is causing confusion for some new
users - change the default to 0.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-08-31 11:43:02 -04:00
Kevin O'Connor 5e2c60bd67 config: Add example config files for the Fysetc Cheetah boards 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-08-31 11:02:44 -04:00
Kevin O'Connor f21f66a31f config: Add example SKR mini-E3 config 
Signed-off-by: Ashley Izat <ashleyi100@googlemail.com>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-08-29 10:19:05 -04:00
Kevin O'Connor 67ddac776d config: Update bigtreetech skr boards to define EXP1/EXP2 plugs 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-08-19 21:40:20 -04:00
Kevin O'Connor e817b85b78 config: Update several config files to use board aliases for lcd 
Add a sample-lcd.cfg with the defintions for several common "reprap"
style LCD displays that use the EXP1/EXP2 plugs.  Update several
config files to add EXP1/EXP2 board aliases.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-08-19 12:57:59 -04:00
Kevin O'Connor bfbcb90751 board_pins: Add a new "extras" module to support per-board pin aliases 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-08-19 12:57:59 -04:00
Kevin O'Connor a482ddf582 tmc2209: Add support for sensorless homing 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-08-19 12:05:09 -04:00
Kevin O'Connor 96fdb6ef36 uc1701: Add support for a reset line on SSD1306 displays 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-08-17 22:14:02 -04:00
Kevin O'Connor 9c40394248 config: Note that samples_tolerance can be used in the bltouch config 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-08-17 15:15:49 -04:00
Kevin O'Connor a3980cebcc neopixel: Add support for WS2811 RGB pixel color order 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-08-09 20:58:49 -04:00
Florian Heilmann 3d38211b8a extra: Add Safe Z home extra 
Signed-off-by: Florian Heilmann <Florian.Heilmann@gmx.net>
 2019-08-09 20:49:17 -04:00
Kevin O'Connor 09f323a038 config: Update example stepper amps in generic-printrboard.cfg 
Reported by @Grumps49.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-08-09 20:43:23 -04:00
Florian Heilmann 383fb1dbfd config: Fix pins for E6 in generic-duet2-duex.cfg 
Signed-off-by: Florian Heilmann <Florian.Heilmann@gmx.net>
 2019-08-07 11:01:23 -04:00
Kevin O'Connor 4c09d8bf02 dotstar: Initial support for "dotstar" LEDs 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-08-06 19:44:32 -04:00
Kevin O'Connor a730aec8bc tmc_uart: Add support for configuring the uart address on tmc2209 chips 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-07-31 13:02:27 -04:00
Kevin O'Connor 745a8dc0ac config: Add an example config file for the bigtreetech skr mini 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-07-30 21:42:20 -04:00
Kevin O'Connor a878831d5e mcp4728: Update to better match printrbot revf requirements 
Reported by @Grumps49.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-07-26 11:02:56 -04:00
Kevin O'Connor 46041f5411 neopixel: Add support for daisy-chained chips 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-07-23 21:59:38 -04:00
Kevin O'Connor abf3fa4b71 neopixel: Add support for setting a default color at startup 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-07-23 21:59:38 -04:00
Kevin O'Connor 4d90b60fdb config: Fix example beeper pin in generic-bigtreetech-skr-v1.3.cfg 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-07-18 11:15:02 -04:00
Kevin O'Connor b7bc96c3b2 neopixel: Add initial support for "neopixel" leds 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-07-12 21:44:01 -04:00
Kevin O'Connor 25438a7901 config: Simplify generic-bigtreetech-skr-v1.3.cfg 
Move the TMC2208 and TMC2130 blocks to later in the file.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-07-12 08:28:10 -04:00
Kevin O'Connor b2a8b0dd65 config: Update default serial setting of generic-duet2-duex.cfg 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-07-11 10:35:22 -04:00
Kevin O'Connor a34613cf86 config: Add a simplified Duet2 Eth/Wifi example config file 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-07-11 10:35:22 -04:00
Kevin O'Connor e2d8a6f02d config: Rename generic-duet2.cfg to generic-duet2-duex.cfg 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-07-11 10:35:22 -04:00
Kevin O'Connor 0343d0c73a firmware_retract: Remove z_hop support 
The current z_hop support did not work correctly with common slicers
that change Z height between retract and unretract, and it did not
work correctly with slicers that issue a retract at the end of a print
and then at the beginning of the next print.

The z_hop support is therefore being removed until these issues can be
fixed.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-07-10 19:25:56 -04:00
Kevin O'Connor a477c50592 config: Heater pins are inverted on the Duet2 Maestro 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-07-10 13:23:59 -04:00
Arksine e19a41d0dd docs: Add documentation for [delayed_gcode] 
Signed-off-by:  Eric Callahan <arksine.code@gmail.com>
 2019-07-01 11:09:30 -04:00
Kevin O'Connor 02e579f578 config: Fix stepper_bed step_distance description in example-polar.cfg 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-07-01 11:00:37 -04:00
Arksine 57eb0e8975 docs: Update for latest changs to skew_correction 
Signed-off-by:  Eric Callahan <arksine.code@gmail.com>
 2019-06-29 10:58:46 -04:00
Kevin O'Connor 7947dc3389 config: Use tmc2660 virtual_enable in generic-duet2.cfg 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-06-28 16:59:26 -04:00
Kevin O'Connor b0c459d8bf config: Use tmc2208 virtual_enable in generic-duet2-maestro.cfg 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-06-28 16:59:26 -04:00
Kevin O'Connor a2e550d1cd stepper: Add support for providing a list of pins to enable 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-06-28 16:59:26 -04:00
Kevin O'Connor 7702f0a027 tmc: Add support for virtual enable pins 
Add support for enabling the stepper via the communication channel.
This improves support for boards with a shared enable line.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-06-28 16:59:26 -04:00
Kevin O'Connor e5f74a64ed polar: Add initial support for multiple bed rotations 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-06-28 10:00:40 -04:00
Arksine a3b4543c97 skew_correction: add documentation 
Signed-Off-By:  Eric Callahan <arksine.code@gmail.com>
 2019-06-26 20:16:35 -04:00
Kevin O'Connor 79c24f95b3 config: Add example tmc2130 sections to SKR v1.3 board 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-06-25 13:49:35 -04:00
Kevin O'Connor e18dddd1ab config: No need to list all tmc drivers in endstop_phase description 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-06-23 12:27:09 -04:00
Kevin O'Connor 7173a2c427 config: Update example-extras.cfg for tmc2209 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-06-23 11:47:24 -04:00
Kevin O'Connor c3467f5b35 config: Add generic-printrboard-g2.cfg config file 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-06-21 23:12:31 -04:00