d46c95b758
docs: Add a note about fixing underlying bugs in CONTRIBUTING.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-10-25 11:53:55 -04:00
a65e04aff7
docs: Add step rate benchmark for stm32h7
...
Signed-off-by: Konstantin Vogel <konstantin.vogel@gmx.net>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-10-21 20:33:28 -04:00
4b77f29c1b
atsamd: Add support CANbus on ATSAME5x chips
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-10-13 11:28:27 -04:00
b0ffb269d2
print_stats: add `SET_PRINT_STATS_INFO` G-Code for pass slicer variables to Klipper ( #5726 )
...
This adds a gcode command that can be used insight the slicer to pass the total layer count and current layer information.
Signed-off-by: Stefan Dej <meteyou@gmail.com>
2022-10-05 15:02:28 -04:00
34870d3e2a
z_thermal_adjust: Add Z thermal adjuster module ( #4157 )
...
Use a frame-coupled temperature probe to compensate for thermal
expansion in real-time.
Signed-off by: Robert Pazdzior <robertp@norbital.com>
2022-09-25 12:39:14 -04:00
8cdb2278d7
docs: Add an example corexy homing macro to TMC_Drivers.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-09-14 17:49:25 -04:00
79be427757
docs: Reword sensorless homing high sensitivity test in TMC_Drivers.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-09-14 17:13:48 -04:00
a530bf2421
docs: Add SDIO programming and split verification details to SDCard_Updates
...
Signed-off-by: Donna Whisnant <dewhisna@dewtronics.com>
2022-09-11 21:57:28 -04:00
9f8f3cd77d
fan: add enable_pin option ( #5732 )
...
Signed-off-by: Lasse Dalegaard <dalegaard@gmail.com>
2022-09-03 12:23:55 -04:00
ae6c16422f
mcp4018: Add SET_DIGIPOT command to mcp4018 implementation ( #5737 )
...
Added a SET_DIGIPOT command to the mcp4018 implementation.
Previously the mcp4018 was read only, and set at the time of
configuration. This allows you to change the value during a
print, which is needed for some older printers that need to
lower the stepper current during preheating.
Signed-off-by: Jake Bordens <jake@allaboutjake.com>
2022-09-02 10:30:06 -04:00
354915d2ad
kinematics: Add deltesian printers ( #5743 )
...
Initial push of the working deltesian kinematics after some successful tests.
Signed-off-by: Fabrice GALLET <tircown@gmail.com>
2022-09-01 15:56:31 -04:00
5d9ff75d02
extruder_stepper: Support configuring pressure advance from config
...
Also added status report for extruder_stepper objects with the
current pressure advance parameters values.
Signed-off-by: Dmitry Butyugin <dmbutyugin@google.com>
2022-09-01 14:53:12 -04:00
f7e29b276e
docs: Update koconnor donation links
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-08-24 21:02:43 -04:00
6a91824486
delta: Added the possibility to get where the "cone shape" of the build volume starts from Macros ( #5662 )
...
Added the possibility to get where the "cone shape" of the build volume starts from Macros
Signed-off-by: Martin Malmqvist <Volcomosq@gmx.com>
2022-08-19 13:27:44 -04:00
dc012f8659
docs: Recommend allow-hotplug in CANBUS.md when using USB to canbus bridge
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-07-29 11:40:54 -04:00
2005d4dbf4
docs: Updates to CANBUS_protocol.md
...
Update the document with latest details.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-07-29 11:40:54 -04:00
b725d971db
bed_screws: report status
...
Signed-off-by: Pedro Lamas <pedrolamas@gmail.com>
2022-07-28 20:43:19 -04:00
c29e190696
docs: fixes typo on heater_bed
...
Signed-off-by: Pedro Lamas <pedrolamas@gmail.com>
2022-07-28 20:37:34 -04:00
282d1113e4
manual_probe: report status
...
Signed-off-by: Pedro Lamas <pedrolamas@gmail.com>
2022-07-21 22:03:31 -04:00
6be114d728
docs: fix rawparams example by truncating comments
...
Signed-off-by: Pedro Lamas <pedrolamas@gmail.com>
2022-07-19 12:48:16 -04:00
d91939c4bf
docs: Add BIGTREETECH to Sponsors.md file
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-07-16 23:17:30 -04:00
2f9fe49cb8
docs: Add a Sponsors.md file
...
Add a documentation page with information on how to support Klipper.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-07-16 10:48:10 -04:00
06022b305f
mkdocs-requirements: Force markdown==3.3.7
...
A new release of markdown (v3.4.1) breaks the website deployment
scripts. Force the existing version.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-07-16 10:43:53 -04:00
167736ad1c
respond: No forced spaces ( #5152 )
...
Signed-off-by: Adrian Joachim <adi.joachim12@gmail.com>
2022-06-30 13:56:35 -04:00
790ff4d8d7
usb_canbus: Initial support for USB to CAN bridge mode
...
Support a USB interface that shows up as a canbus adapter to linux.
Route both local and real canbus packets over that interface.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-06-27 10:50:23 -04:00
6ad6e39ad2
docs: add SET_DISPLAY_TEXT documentation
...
Signed-off-by: Eric Callahan <arksine.code@gmail.com>
2022-06-27 10:09:02 -04:00
ae17b66a88
docs: remove FAQ ToC ( #5585 )
...
Signed-off-by: Yifei Ding <yifeiding@protonmail.com>
2022-06-27 09:58:48 -04:00
52a8afba43
docs: Note mcu types with i2c_speed support in Config_Reference.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-06-20 12:58:05 -04:00
8804c1578d
docs: Added instructions how to configure I2C for MPU-9250
...
Signed-off-by: Dmitry Butyugin <dmbutyugin@google.com>
2022-06-20 12:47:14 -04:00
f2e27ae05e
docs: Updated accelerometer installation instructions for Python 3
...
Signed-off-by: Dmitry Butyugin <dmbutyugin@google.com>
2022-06-20 12:47:14 -04:00
98a24172e7
docs: Add mpu9250 to Config_Reference.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-06-20 12:41:24 -04:00
46842026b9
docs: Wrap lines in Measuring_Resonances.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-06-20 12:41:24 -04:00
f2a5800cea
configfile: Expose options awaiting to be saved ( #5270 )
...
Adds a save_config_pending_items to the status reported by
configfile reflecting the items and values that a future
SAVE_CONFIG would actually persist.
Signed-off-by: Kurt Haenen <kurt.haenen@gmail.com>
2022-06-20 12:10:57 -04:00
55d1c3728d
docs: Note that i2c is not noise resilient in Config_Reference.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-06-16 18:38:31 -04:00
f55b9d3e57
mpu9250: Adding support for MPU-9250 (and MPU-6050) accelerometer
...
Add support for mpu9250 accelerometer over I2C bus.
Signed-off-by: Harry Beyel <harry3b9@gmail.com>
2022-06-16 11:09:33 -04:00
b9e195f098
flash_usb: Use hexid "2e8a:0003" for rp2040 already in bootloader mode
...
Use a USB hex id to indicate that the device is already in bootloader
mode. This makes the rp2040 flashing code similar to the other
boards.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-06-16 10:59:11 -04:00
ea4f6d6a77
rp2040: Implement workaround for USB errata "rp2040-e5"
...
The rp2040 USB may not connect after a reset. Implementation the
recommended workaround.
Signed-off-by: Lasse Dalegaard <dalegaard@gmail.com>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-06-12 11:25:57 -04:00
9047702a00
mkdocs: Replace TOC in Translations
...
Signed-off-by: Yifei Ding<yifeiding@protonmail.com>
2022-06-03 19:14:13 -04:00
7c8cf7661b
docs: fix typo in Exclude_Object.md
...
Signed-off-by: Stefan Dej <meteyou@gmail.com>
2022-06-03 18:11:35 -04:00
638cd4d781
docs: add exclude_object documentation
...
Also include sample macros to add M486 compatibility.
Signed-off-by: Franklyn Tackitt <git@frank.af>
Co-authored-by: Troy Jacobson <troy.d.jacobson@gmail.com>
2022-06-03 14:12:04 -04:00
c16eab212e
virtual_sdcard: Adds on_error_gcode
...
Signed-off-by: Pedro Lamas <pedrolamas@gmail.com>
2022-06-03 11:26:34 -04:00
af38d708cb
adxl345: Support recording data from multiple ADXL345's in one run, and more. ( #5224 )
...
Add PROBE and CHIP to TEST_RESONANCES
Since it's possible to specify more than one chip
in TEST_RESONANCES the CHIP parameter has been
renamed to CHIPS
Signed-off-by: Mikkel Schmidt <mikkel.schmidt@gmail.com>
2022-05-23 19:56:58 -04:00
c7e0372c5d
docs: Line wrapping in G-Codes.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-05-23 15:50:43 -04:00
3081899883
docs: Documentation on screws_tilt_calculate MAX_DEVIATION parameter ( #5522 )
...
Signed-off-by: Kevin Nguyen <ngynkvn@gmail.com>
2022-05-23 15:49:59 -04:00
f1c6f76a51
docs: Update Config_Reference.md z_hop speed ( #5514 )
...
The default z-hop speed is actually 15 mm/s according to the code in safe_z_home.py
Signed-off-by: Cameron River <camerony@gmail.com>
2022-05-23 15:05:53 -04:00
bbb06a014b
docs: fix links to Config_Reference.md
...
Signed-off-by: Dominik Willner <th33xitus@gmail.com>
2022-05-18 12:05:28 -04:00
1c18265a62
docs: Minor wording update to Code_Overview.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-05-17 11:55:17 -04:00
e8dc44a0ca
docs: Update Code_Overview.md with more realistic task timing guidelines
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-05-17 11:46:38 -04:00
95676343db
docs: Updates to Installation.md document
...
Recommend users obtain an example config file prior to starting the
installation.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-05-17 11:36:36 -04:00
be4b8b17f2
docs: Minor CanBoot documentation fixes
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-05-10 11:55:06 -04:00
95d06c95e3
docs: add CanBoot documentation to bootloaders.md
...
Signed-off-by: Eric Callahan <arksine.code@gmail.com>
2022-05-10 11:48:06 -04:00
b44eee609a
docs: Update G-Codes.md ( #5487 )
...
Typo correction: my -> by
Signed-off-by: Oscar Cetnarowski <0.007954545@proton.me>
2022-05-09 22:20:06 -04:00
661f5b08c8
docs: Fix typo in Benchmarks.md
...
Reported by @kaidegit.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-05-06 14:54:50 -04:00
c4232bea2e
docs: Note pins used for stm32flash in Bootloaders.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-05-04 13:54:42 -04:00
722ad4a1d2
docs: Update Example_Configs.md to note that baud should be 250000
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-04-30 14:51:14 -04:00
e43fd4fab0
docs: Note to run DELTA_CALIBRATE before DELTA_ANALYZE in Delta_Calibrate.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-04-29 13:58:05 -04:00
1eb6afdbe5
docs: List only micro-controller names in benchmarks table in Features.md
...
There is concern that some users are interpreting the benchmark table
in Features.md as a list of "supported boards" or possibly
"recommended boards". This was not the intent.
Remove the board names from the list to make it more clear the intent
is only to describe the benchmarks.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-04-29 12:20:41 -04:00
07a90902a5
docs: Improve wording of screws_tilt_adjust in Config_Reference.md
...
Reported by @JamesH1978.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-04-23 21:22:02 -04:00
a02da85101
docs: Fix typo in query_adc section of G-Codes.md
...
Reported by @jakep82.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-04-21 19:20:46 -04:00
5f0885958d
neopixel: Support chains with a mix of color_order
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-04-18 10:16:10 -04:00
44567879f6
stm32: Add STM32F072 16KiB bootloader option ( #5404 )
...
Signed-off-by: Alexander Stöpperger <a.stoepperger@gmx-topmail.de>
2022-04-13 11:22:04 -04:00
4a8a76ead8
docs: Update temperature_fan PID documentation in Config_Reference.md
...
Reported by @dewi-ny-je.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-04-11 11:46:24 -04:00
5d82be2f5d
docs: Add link to linux mcu neopixels config docs ( #5402 )
...
The reference to the linux mcu was helpful to understand what a linux mcu was but didn't help with understanding the technical reasons why it's not supported.
Signed-off-by: Karl Bowden <karl@bearded.sexy>
2022-04-11 10:35:38 -04:00
4d4c8d8f94
docs: Add link to Moonraker in API_Server.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-04-09 19:32:38 -04:00
6e61e47a23
docs: Fix smarteffector link in G-Codes.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-04-09 19:13:30 -04:00
05330fd3e5
docs: Minor updates to SmartEffector docs
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-04-09 19:10:16 -04:00
2060a6908f
smart_effector: Config and command reference
...
Signed-off-by: Dmitry Butyugin <dmbutyugin@google.com>
2022-04-09 19:04:57 -04:00
f3b995227a
docster: Fix incorrect default value for max_freq
2022-04-09 16:31:23 -04:00
7c5b7191c3
docs: Update wording of "quality improvement" section of CONTRIBUTING.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-04-08 09:56:22 -04:00
5a409d5d31
docs: Provide more information on PID in Config_Reference.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-04-07 12:30:02 -04:00
647a1cd8ca
temperature_fan: Remove deprecated pid_integral_max option
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-04-07 12:10:48 -04:00
555ac58a3f
pca9632: Add support for configurable color_order
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-04-07 11:48:25 -04:00
f0700c0985
pca9632: Support using hardware I2C
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-04-07 11:43:52 -04:00
61792e3e31
_klipper3d: Specify mkdocs language config options
...
Signed-off-by: Yifei Ding <yifeiding@protonmail.com>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-04-06 19:04:48 -04:00
b35b6cb10b
_klipper3d: New language translation deployment
...
Signed-off-by: Yifei Ding <yifeiding@protonmail.com>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-04-06 19:04:48 -04:00
444d209cce
_klipper3d: Remove translation stubs
...
Support for language translations on the klipper3d.org site was
disabled in commit c067d4df
2022-04-06 19:04:48 -04:00
dc7b02f329
neopixel: Support arbitrary RGBW strings in color_order config
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-04-06 09:27:36 -04:00
92de6e91dc
docs: Note that "minutes" in screws_tilt_adjust means minutes of a clock face
...
Reported by @kubik369 and @Sineos.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-04-05 20:35:56 -04:00
e6bfc4c9aa
led: Support setting display_template parameters via SET_LED_TEMPLATE
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-03-31 13:08:12 -04:00
1ab3ac39e4
led: Support automated LED updates based on display_template results
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-03-31 13:08:12 -04:00
35ff49e546
docs: Note that neopixel doesn't work on "linux mcu"
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-03-31 13:08:12 -04:00
a7f69caa37
docs: Note change to neopixel/dotstar API status fields
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-03-31 13:08:12 -04:00
96795def9c
led: Add support for PWM controlled LEDs
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-03-31 13:08:12 -04:00
3340bb2ffd
docs: Add explicit Jinja2 prerequisite to mkdocs-requirements.txt
...
Avoid build failures by adding explicit Jinja2 version.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-03-29 20:40:48 -04:00
4d1c3478ab
angle: Add support for reading tle5012b chip registers (for debugging)
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-03-29 20:34:46 -04:00
1b08553a42
angle: Report tle5012b temperature
...
Export the tle5012b temperature readings when performing measurements.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-03-29 20:34:46 -04:00
aec742ece4
angle: Initial support for angle sensor calibration
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-03-29 20:34:46 -04:00
74937326d3
sensor_angle: Add support for bulk querying of spi angle sensors
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-03-29 20:34:46 -04:00
7e654aed2f
docs: Fix config snippet for polar
...
Previously the section for stepper_bed was intertwined with printer. This commit makes it match (../config/example-polar.cfg).
Signed-off-by: Charles Pickering <me@charlespick.xyz>
2022-03-20 11:43:32 -04:00
b4b19b8fc1
docs: Add a link to Rotation_Distance.md in Example_Configs.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-03-17 21:50:33 -04:00
d7f8bf351f
docs: Fix section headers of [display] sections in Config_Reference.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-03-16 12:04:41 -04:00
0761026e36
pca9632: LED module for FlashForge Dreamer 3D printer ( #4654 )
...
Added PCA9632 LED module support using software I2C from MCP4018
modulo drive the LED strip of a FlashForge Dreamer 3D printer.
Based on the PCA9533 module.
Signed-off-by: Ricardo Alcantara <ricardo@vulcanolabs.xyz>
2022-03-14 14:28:42 -04:00
02d770ae3c
neopixel: add BGR for neopixel ( #5160 )
...
Signed-off-by: Thomas Liebold <electron2410@gmail.com>
2022-03-14 12:30:58 -04:00
30098db22a
docs: Fix typo in RPi_microcontroller.md
...
Reported by @bradengel.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-03-14 00:38:25 -04:00
1de0d75079
docs: Move "benefits" review section up in CONTRIBUTING.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-03-13 17:13:55 -04:00
24e7bbf0df
docs: Add missing bltouch lift_speed option to Config_Reference.md ( #5344 )
...
Signed-off-by: Fritz Webering <fritz@webering.eu>
2022-03-11 13:35:08 -05:00
c721c20c97
docs: Improve G-Codes.md description of extruder commands
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-03-08 15:34:11 -05:00
38b992532a
display_status: stops M73 from setting progress to 0 if P missing
...
Signed-off-by: Pedro Lamas <pedrolamas@gmail.com>
2022-03-08 14:20:35 -05:00
4815a946c2
extruder_stepper: Do not default to synching with "extruder" at startup
...
With recent changes, the extruder_stepper may be used for new
purposes, and synchronizing to the "extruder" motion queue at startup
may become a confusing default.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-03-04 13:38:59 -05:00
6627d036ac
extruder: Allow an extruder object to be created without a stepper
...
This may be useful for dual hotend printers that have only one
stepper.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-03-04 13:20:35 -05:00
Kevin O'Connor