3diy
/
klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
4,741 Commits 1 Branch 0 Tags 27 MiB
Commit Graph

995 Commits

Author SHA1 Message Date
alchemyEngine 34870d3e2a
z_thermal_adjust: Add Z thermal adjuster module (#4157) 
Use a frame-coupled temperature probe to compensate for thermal
expansion in real-time.

Signed-off by: Robert Pazdzior <robertp@norbital.com>
 2022-09-25 12:39:14 -04:00
Kevin O'Connor 8cdb2278d7 docs: Add an example corexy homing macro to TMC_Drivers.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-09-14 17:49:25 -04:00
Kevin O'Connor 79be427757 docs: Reword sensorless homing high sensitivity test in TMC_Drivers.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-09-14 17:13:48 -04:00
Donna Whisnant a530bf2421 docs: Add SDIO programming and split verification details to SDCard_Updates 
Signed-off-by: Donna Whisnant <dewhisna@dewtronics.com>
 2022-09-11 21:57:28 -04:00
dalegaard 9f8f3cd77d
fan: add enable_pin option (#5732) 
Signed-off-by: Lasse Dalegaard <dalegaard@gmail.com>
 2022-09-03 12:23:55 -04:00
jake-b ae6c16422f
mcp4018: Add SET_DIGIPOT command to mcp4018 implementation (#5737) 
Added a SET_DIGIPOT command to the mcp4018 implementation.
Previously the mcp4018 was read only, and set at the time of
configuration.  This allows you to change the value during a
print, which is needed for some older printers that need to
lower the stepper current during preheating.

Signed-off-by: Jake Bordens <jake@allaboutjake.com>
 2022-09-02 10:30:06 -04:00
Tircown 354915d2ad
kinematics: Add deltesian printers (#5743) 
Initial push of the working deltesian kinematics after some successful tests.

Signed-off-by: Fabrice GALLET <tircown@gmail.com>
 2022-09-01 15:56:31 -04:00
Dmitry Butyugin 5d9ff75d02 extruder_stepper: Support configuring pressure advance from config 
Also added status report for extruder_stepper objects with the
current pressure advance parameters values.

Signed-off-by: Dmitry Butyugin <dmbutyugin@google.com>
 2022-09-01 14:53:12 -04:00
Kevin O'Connor f7e29b276e docs: Update koconnor donation links 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-08-24 21:02:43 -04:00
Nitram 6a91824486
delta: Added the possibility to get where the "cone shape" of the build volume starts from Macros (#5662) 
Added the possibility to get where the "cone shape" of the build volume starts from Macros

Signed-off-by: Martin Malmqvist <Volcomosq@gmx.com>
 2022-08-19 13:27:44 -04:00
Kevin O'Connor dc012f8659 docs: Recommend allow-hotplug in CANBUS.md when using USB to canbus bridge 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-07-29 11:40:54 -04:00
Kevin O'Connor 2005d4dbf4 docs: Updates to CANBUS_protocol.md 
Update the document with latest details.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-07-29 11:40:54 -04:00
Pedro Lamas b725d971db bed_screws: report status 
Signed-off-by: Pedro Lamas <pedrolamas@gmail.com>
 2022-07-28 20:43:19 -04:00
Pedro Lamas c29e190696 docs: fixes typo on heater_bed 
Signed-off-by: Pedro Lamas <pedrolamas@gmail.com>
 2022-07-28 20:37:34 -04:00
Pedro Lamas 282d1113e4 manual_probe: report status 
Signed-off-by: Pedro Lamas <pedrolamas@gmail.com>
 2022-07-21 22:03:31 -04:00
Pedro Lamas 6be114d728 docs: fix rawparams example by truncating comments 
Signed-off-by: Pedro Lamas <pedrolamas@gmail.com>
 2022-07-19 12:48:16 -04:00
Kevin O'Connor d91939c4bf docs: Add BIGTREETECH to Sponsors.md file 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-07-16 23:17:30 -04:00
Kevin O'Connor 2f9fe49cb8 docs: Add a Sponsors.md file 
Add a documentation page with information on how to support Klipper.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-07-16 10:48:10 -04:00
Kevin O'Connor 06022b305f mkdocs-requirements: Force markdown==3.3.7 
A new release of markdown (v3.4.1) breaks the website deployment
scripts.  Force the existing version.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-07-16 10:43:53 -04:00
chestwood96 167736ad1c
respond: No forced spaces (#5152) 
Signed-off-by: Adrian Joachim <adi.joachim12@gmail.com>
 2022-06-30 13:56:35 -04:00
Kevin O'Connor 790ff4d8d7 usb_canbus: Initial support for USB to CAN bridge mode 
Support a USB interface that shows up as a canbus adapter to linux.
Route both local and real canbus packets over that interface.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-06-27 10:50:23 -04:00
Eric Callahan 6ad6e39ad2 docs: add SET_DISPLAY_TEXT documentation 
Signed-off-by:  Eric Callahan <arksine.code@gmail.com>
 2022-06-27 10:09:02 -04:00
Yifei Ding ae17b66a88
docs: remove FAQ ToC (#5585) 
Signed-off-by: Yifei Ding <yifeiding@protonmail.com>
 2022-06-27 09:58:48 -04:00
Kevin O'Connor 52a8afba43 docs: Note mcu types with i2c_speed support in Config_Reference.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-06-20 12:58:05 -04:00
Dmitry Butyugin 8804c1578d docs: Added instructions how to configure I2C for MPU-9250 
Signed-off-by: Dmitry Butyugin <dmbutyugin@google.com>
 2022-06-20 12:47:14 -04:00
Dmitry Butyugin f2e27ae05e docs: Updated accelerometer installation instructions for Python 3 
Signed-off-by: Dmitry Butyugin <dmbutyugin@google.com>
 2022-06-20 12:47:14 -04:00
Kevin O'Connor 98a24172e7 docs: Add mpu9250 to Config_Reference.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-06-20 12:41:24 -04:00
Kevin O'Connor 46842026b9 docs: Wrap lines in Measuring_Resonances.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-06-20 12:41:24 -04:00
Kurt Haenen f2a5800cea
configfile: Expose options awaiting to be saved (#5270) 
Adds a save_config_pending_items to the status reported by
configfile reflecting the items and values that a future
SAVE_CONFIG would actually persist.

Signed-off-by: Kurt Haenen <kurt.haenen@gmail.com>
 2022-06-20 12:10:57 -04:00
Kevin O'Connor 55d1c3728d docs: Note that i2c is not noise resilient in Config_Reference.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-06-16 18:38:31 -04:00
bluesforte f55b9d3e57 mpu9250: Adding support for MPU-9250 (and MPU-6050) accelerometer 
Add support for mpu9250 accelerometer over I2C bus.

Signed-off-by: Harry Beyel <harry3b9@gmail.com>
 2022-06-16 11:09:33 -04:00
Kevin O'Connor b9e195f098 flash_usb: Use hexid "2e8a:0003" for rp2040 already in bootloader mode 
Use a USB hex id to indicate that the device is already in bootloader
mode.  This makes the rp2040 flashing code similar to the other
boards.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-06-16 10:59:11 -04:00
Kevin O'Connor ea4f6d6a77 rp2040: Implement workaround for USB errata "rp2040-e5" 
The rp2040 USB may not connect after a reset.  Implementation the
recommended workaround.

Signed-off-by: Lasse Dalegaard <dalegaard@gmail.com>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-06-12 11:25:57 -04:00
Yifei Ding 9047702a00 mkdocs: Replace TOC in Translations 
Signed-off-by: Yifei Ding<yifeiding@protonmail.com>
 2022-06-03 19:14:13 -04:00
Stefan Dej 7c8cf7661b docs: fix typo in Exclude_Object.md 
Signed-off-by: Stefan Dej <meteyou@gmail.com>
 2022-06-03 18:11:35 -04:00
Frank Tackitt 638cd4d781 docs: add exclude_object documentation 
Also include sample macros to add M486 compatibility.

Signed-off-by: Franklyn Tackitt <git@frank.af>
Co-authored-by: Troy Jacobson <troy.d.jacobson@gmail.com>
 2022-06-03 14:12:04 -04:00
Pedro Lamas c16eab212e virtual_sdcard: Adds on_error_gcode 
Signed-off-by: Pedro Lamas <pedrolamas@gmail.com>
 2022-06-03 11:26:34 -04:00
Mikkel Schmidt af38d708cb
adxl345: Support recording data from multiple ADXL345's in one run, and more. (#5224) 
Add PROBE and CHIP to TEST_RESONANCES

Since it's possible to specify more than one chip
in TEST_RESONANCES the CHIP parameter has been
renamed to CHIPS

Signed-off-by: Mikkel Schmidt <mikkel.schmidt@gmail.com>
 2022-05-23 19:56:58 -04:00
Kevin O'Connor c7e0372c5d docs: Line wrapping in G-Codes.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-05-23 15:50:43 -04:00
Kevin Nguyen 3081899883
docs: Documentation on screws_tilt_calculate MAX_DEVIATION parameter (#5522) 
Signed-off-by: Kevin Nguyen <ngynkvn@gmail.com>
 2022-05-23 15:49:59 -04:00
camerony f1c6f76a51
docs: Update Config_Reference.md z_hop speed (#5514) 
The default z-hop speed is actually 15 mm/s according to the code in safe_z_home.py

Signed-off-by: Cameron River <camerony@gmail.com>
 2022-05-23 15:05:53 -04:00
th33xitus bbb06a014b docs: fix links to Config_Reference.md 
Signed-off-by: Dominik Willner <th33xitus@gmail.com>
 2022-05-18 12:05:28 -04:00
Kevin O'Connor 1c18265a62 docs: Minor wording update to Code_Overview.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-05-17 11:55:17 -04:00
Kevin O'Connor e8dc44a0ca docs: Update Code_Overview.md with more realistic task timing guidelines 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-05-17 11:46:38 -04:00
Kevin O'Connor 95676343db docs: Updates to Installation.md document 
Recommend users obtain an example config file prior to starting the
installation.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-05-17 11:36:36 -04:00
Kevin O'Connor be4b8b17f2 docs: Minor CanBoot documentation fixes 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-05-10 11:55:06 -04:00
Eric Callahan 95d06c95e3 docs: add CanBoot documentation to bootloaders.md 
Signed-off-by:  Eric Callahan <arksine.code@gmail.com>
 2022-05-10 11:48:06 -04:00
3-5-20 b44eee609a
docs: Update G-Codes.md (#5487) 
Typo correction: my -> by

Signed-off-by: Oscar Cetnarowski <0.007954545@proton.me>
 2022-05-09 22:20:06 -04:00
Kevin O'Connor 661f5b08c8 docs: Fix typo in Benchmarks.md 
Reported by @kaidegit.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-05-06 14:54:50 -04:00
Kevin O'Connor c4232bea2e docs: Note pins used for stm32flash in Bootloaders.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-05-04 13:54:42 -04:00