Commit Graph

1420 Commits

Author SHA1 Message Date
Kevin O'Connor fce993478c delta_calibrate: Fix typo in config output (radius should be delta_radius)
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-07-22 11:47:49 -04:00
Kevin O'Connor cb29143939 itersolve: Support calculating a stepper position from a cartesian coordinate
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-07-18 11:51:28 -04:00
Kevin O'Connor e2b4b1616f lpc176x: Add support for SPI
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-07-18 10:11:29 -04:00
Kevin O'Connor acefe26e0f idle_timeout: Move timeout handling from toolhead.py to new extras module
Move the "motor_off_timeout" tracking to a new module in the extras/
directory.  This makes it easier to customize the idle timeout
behavior.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-07-16 10:32:48 -04:00
Kevin O'Connor 0025fbf10d toolhead: Replace junction_deviation with square_corner_velocity
The junction_deviation configuration parameter has a number of quirks
that make it difficult to configure.  Replace it with a
"square_corner_velocity" configuration parameter.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-07-16 10:32:43 -04:00
Kevin O'Connor ca505bf4ac kinematics: Convert get_rails() method to get_steppers()
All callers of get_rails() actually just want the steppers, so return
them directly.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-07-16 10:16:16 -04:00
Kevin O'Connor 89835940f7 query_endstops: Move QUERY_ENDSTOP command to it own extras/ module
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-07-16 10:06:30 -04:00
Kevin O'Connor 28fa954487 delta: Store stable positions as integers
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-07-15 22:05:13 -04:00
Kevin O'Connor 94dc8167c9 z_tilt: Don't default "points" parameter to "z_positions" parameter
It's rare to have all the Z stepper locations directly under the
printable surface, so using z_positions for points is not a good
default.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-07-15 10:30:27 -04:00
Kevin O'Connor 260d12af6d probe: Make sure there are at least 3 points even if using default_points
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-07-14 15:33:58 -04:00
Kevin O'Connor ce0f4fe038 delta: Minor change to get_position_from_stable()
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-07-14 11:55:15 -04:00
Pascal Albert 244d0aa65b atmega1284p: Add choice between UART0 or UART1 to Kconfig
Signed-off-by: Pascal Albert <lucky@foxserver.org>
2018-07-13 19:58:04 -04:00
Kevin O'Connor 2af73d1006 probe: Simplify mcu_probe stepper registration
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-07-13 17:14:33 -04:00
Kevin O'Connor a31c31aed4 mcu: Enhance itersolve stepper kinematics allocation
Allocate the stepper_kinematics directly in mcu.py - that way the
kinematic classes don't have to interact with the chelper code.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-07-13 11:37:36 -04:00
Kevin O'Connor b988596519 toolhead: Fill cmove in toolhead instead of in each kinematic class
This simplifies the kinematic classes.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-07-13 11:37:20 -04:00
Kevin O'Connor 8faab46ed2 toolhead: Move kinematic modules to new kinematics/ directory
Move extruder.py, cartesian.py, corexy.py, and delta.py to a new
kinematics/ sub-directory.  This is intended to make adding new
kinematics a little easier.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-07-12 22:50:25 -04:00
Kevin O'Connor 7d897d84d7 klippy: No need to pass printer reference to add_printer_objects()
The config reference already stores a reference to the printer object.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-07-12 22:26:32 -04:00
Kevin O'Connor 5cdba1fda8 mcu: Send mcu config and init immediately after building it
Don't issue a get_config command after building the config as the
built config may contain time sensitive initialization commands.
Instead, send the config and init commands immediately after invoking
the build_config() callbacks.  This avoids some rare "timer too close"
errors during configuration.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-07-12 12:54:12 -04:00
Kevin O'Connor 211e34e62b mcu: Add leading underscore to handle_shutdown() and handle_mcu_stats()
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-07-12 12:19:04 -04:00
Kevin O'Connor 21563c5965 config: Minor updates to example-extras.cfg
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-07-12 12:18:31 -04:00
Kevin O'Connor 32a85edb16 spidev: Minor rework to spidev_transfer()
Gcc does a better job of inlining code if spidev_transfer() is
reworked slightly.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-07-11 19:43:20 -04:00
Kevin O'Connor 733506dfb2 sam3x8e: Configure spi transfer in spi_prepare()
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-07-11 19:40:51 -04:00
Kevin O'Connor d9f960fb0c avr: Configure spi transfer in spi_prepare()
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-07-11 19:40:21 -04:00
Kevin O'Connor f60b0093b7 docs: Add a section with micro-controller porting tips to Code_Overview.md
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-07-11 14:40:39 -04:00
Kevin O'Connor 5294b3cd2d simulator: Rework dummy simulator code to user timer_irq / serial_irq
Change the simulator to use the generic timer_irq.c and serial_irq.c
code for (dummy) timer and io handling.  This is just to make the code
a better example for other developers (most micro-controllers will use
the timer_irq.c and serial_irq.c code).

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-07-11 14:35:24 -04:00
Kevin O'Connor 00ea4428a3 test: Add recent printer config files to printers.test test case
Add printer-tronxy-x8-2018.cfg and printer-anycubic-kossel-plus-2017.cfg.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-07-10 12:04:39 -04:00
Seyed Seraj 70b5e1eb69 Add Printer Configuration File for the Tronxy X8
Added printer-tronxy-x8-2018.cfg for the Tronxy X8 with the CXY-V2-0508 board.

Signed-off-by: Seyed Seraj <s.seraj@hotmail.com>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-07-10 11:59:07 -04:00
Kevin O'Connor 68d78f0791 delta: Minor comment updates
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-07-09 18:00:58 -04:00
Kevin O'Connor e1833e020a chelper: Use CLOCK_MONOTONIC_RAW
Switch the host code from the CLOCK_MONOTONIC clock to the Linux
specific CLOCK_MONOTONIC_RAW clock.  It's common for ntp to slew the
CLOCK_MONOTONIC clock to account for drift, and that can break the
host's ability to make accurate predictions of the micro-controller
clock.  This could lead to "move queue empty" errors.  The
CLOCK_MONOTONIC_RAW clock is not slewed and thus should not have this
problem.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-07-09 12:25:19 -04:00
Kevin O'Connor 4125e176b7 docs: Expand on why it is important to provide the log in Contact.md
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-07-08 20:30:35 -04:00
Kevin O'Connor fa9b321991 docs: Update main documentation to not Smoothieboard support
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-07-08 11:01:54 -04:00
Kevin O'Connor f7c2d918b6 config: Update Smoothieboard configs with notes on flashing the devices
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-07-08 10:45:17 -04:00
Kevin O'Connor f3ac1a2306 docs: Add M206 and M119 to G-Codes.md
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-07-08 10:23:44 -04:00
Kevin O'Connor b4f03e8363 docs: Add display g-code commands to docs/G-Codes.md
Add M117 and M73 to the list of supported G-Codes.

Also, remove M117 from the list of commands reported by the HELP
command as that command is typically only used to list "extended
g-code" commands.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-07-08 10:12:23 -04:00
Kevin O'Connor 649d7c54f0 travis-build: Narrow portions of test run with "set +x"
No need to include all the test preparation in the verbose output - as
that can make the output more confusing.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-07-08 09:29:13 -04:00
Grigori Goronzy 2991c7a831 stm32f1: implement spi_prepare
Implement spi_prepare to fix the undefined behavior on SPI transaction
start.

Tested with the following command sequence:

allocate_oids count=2
config_spi oid=0 bus=0 pin=PA8 mode=3 rate=1000000 shutdown_msg=
config_spi oid=1 bus=0 pin=PA8 mode=1 rate=1000000 shutdown_msg=
spi_send oid=0 data=30313233343536373839
spi_transfer oid=1 data=3031

Discussion about this here:
https://github.com/KevinOConnor/klipper/pull/453#issuecomment-403131149

Signed-off-by: Grigori Goronzy <greg@chown.ath.cx>
2018-07-08 09:25:11 -04:00
Grigori Goronzy ebd9035325 SPI: introduce spi_prepare function
The SPI interface needs to be enabled and configured to the correct
settings of a given oid before CS is asserted. The new function
spi_prepare() allows ports to do that.

This port only introduces the new function in all ports with no
implementation and adds the call to the Klipper generic firmware code.
That means everything still works as before. Ports need to be changed
to fix the underlying issue.

Discussion about the motivation here:
https://github.com/KevinOConnor/klipper/pull/453#issuecomment-403131149

Signed-off-by: Grigori Goronzy <greg@chown.ath.cx>
2018-07-08 09:25:11 -04:00
Grigori Goronzy 5c7c8c984b stm32f1: add SPI support
Add basic SPI support and associated documentation.

v2: remove baud rate check, fix baud rate calculations
v3: finish transaction with BSY check, disable SPI when not in use

Signed-off-by: Grigori Goronzy <greg@chown.ath.cx>
2018-07-07 11:05:33 -04:00
Kevin O'Connor b0ee323e2e heater: Introduce smooth_time config option; remove pid_deriv_time
Add generic temperature smoothing to the Heater class.  This is useful
to avoid min_extrude_temp and verify_heater errors due to measurement
noise.

Rename the pid_deriv_time config option to smooth_time so that the
smoothing amount need only be specified once.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-07-06 13:47:10 -04:00
Kevin O'Connor 32175bc66a test: Minor comment update in travis-build.sh
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-07-05 15:19:37 -04:00
Kevin O'Connor bbd3f18178 test: Clean up travis-ci build output
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-07-05 11:49:10 -04:00
Kevin O'Connor 85797a1f76 test: Add additional commands to test in commands.test
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-07-05 11:02:48 -04:00
Kevin O'Connor 295a6f48fc test: Add additional movement commands to move.gcode
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-07-05 11:02:09 -04:00
Kevin O'Connor 1eb416002b sam3x8e: Read from the SPI_RDR on SPI send even if no data needed
Be sure to read the SPI_RDR as that clears the RDRF flag.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-07-05 10:29:52 -04:00
Kevin O'Connor 7e9ee6aef7 docs: Minor updates to Code_Overview.md
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-07-03 13:33:48 -04:00
Kevin O'Connor 80bcafda77 test: Add a test case for common g-code configuration and status commands
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-07-03 12:34:33 -04:00
Eric Callahan b91b0f24db gcode: fix for GET_POSITION (#454)
Signed-off-by: Eric Callahan <arksine.code@gmail.com>
2018-07-03 12:22:55 -04:00
Kevin O'Connor 0dbfa915de adccmds: Add support for min/max temperature check filtering
Extend the ADC out of range check so that it is possible to sample
multiple times before going into a shutdown state.  This reduces the
chance that measurement noise will cause an error.  In an actual over
temperature (or under temperature event) it is expected that the
sensor will consistently report the problem, so extra checks for an
additional second or two should not substantially increase risk.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-07-02 13:56:34 -04:00
Hans Raaf 5b3444c060 config: Add Anycubic Kossel plus size delta printer config
Signed-off-by: Hans Raaf <hr-klipper@oderwat.de>
2018-07-02 12:28:19 -04:00
Kevin O'Connor bae094eac3 test: Expand whitespace checks to test files and test compile configs
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-07-01 10:52:30 -04:00