64e6d85898
sam4e8e: Add the SAM4e8e port
...
This can be flashed to e.g. the duet wifi using bossac. It requires a
later version as is currently included in the klipper repo (1.8
vs. 1.2). Comms are currently via UART0 only, USB serial is still TBD
Signed-off-by: Florian Heilmann <Florian.Heilmann@gmx.net>
2018-08-08 10:44:49 -04:00
2eaf3510ab
test: Add SAMD21 compile test case
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-08-07 00:14:16 -04:00
63dffd9307
spi_temperature: Provide a default value for spi_speed
...
All of the Maxim chips support a 4Mhz spi transfer rate, so use that
as a default spi speed.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-07-24 15:49:14 -04:00
5b124d59f2
spi_temperature: Remove spi_mode parameter
...
All of the Maxim chips can use SPI mode 1, so no need to configure it.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-07-24 15:47:17 -04:00
c0bf4327fd
test: Add a test case for less common temperature sensors
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-07-24 12:54:22 -04:00
0025fbf10d
toolhead: Replace junction_deviation with square_corner_velocity
...
The junction_deviation configuration parameter has a number of quirks
that make it difficult to configure. Replace it with a
"square_corner_velocity" configuration parameter.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-07-16 10:32:43 -04:00
89835940f7
query_endstops: Move QUERY_ENDSTOP command to it own extras/ module
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-07-16 10:06:30 -04:00
00ea4428a3
test: Add recent printer config files to printers.test test case
...
Add printer-tronxy-x8-2018.cfg and printer-anycubic-kossel-plus-2017.cfg.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-07-10 12:04:39 -04:00
85797a1f76
test: Add additional commands to test in commands.test
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-07-05 11:02:48 -04:00
295a6f48fc
test: Add additional movement commands to move.gcode
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-07-05 11:02:09 -04:00
80bcafda77
test: Add a test case for common g-code configuration and status commands
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-07-03 12:34:33 -04:00
cc6b416660
test: Add support for testing klippy with multi-mcu configs
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-06-29 13:52:23 -04:00
5922a1ea1b
test: Add example kinematic config files to printers.test testcase
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-06-29 13:16:50 -04:00
fe676fa099
test: Add Ender2 and ReArm configs to printers.test testcase
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-06-29 13:14:14 -04:00
cda08a844a
test: Add a build test case for the PRU
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-06-28 17:01:12 -04:00
d94dc44e98
test: Add a dual_carriage test case
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-06-17 10:03:43 -04:00
ea18034258
test: Add STEPPER_BUZZ and DELTA_CALIBRATE tests to delta.test
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-06-17 09:55:30 -04:00
9972db5a2a
test: Add multi_z test case
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-06-17 09:47:34 -04:00
eb801631b9
test: Add basic klippy regression tests
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-06-16 16:20:49 -04:00
141bd0ce9b
test: Add LPC176x compile test case
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-05-25 11:52:13 -04:00
b5b365289c
test: Add STM32F1 compile test case
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-04-09 19:23:55 -04:00
99b4122901
test: Add compile tests for at90usb1286 and atmega1284p chips
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-02-26 15:03:05 -05:00
28d70eaf0c
test: Update travis build to include a basic klippy host test
...
Move the travis installation steps from the travis-build.sh script to
a new script (scripts/travis-install.sh). Move the travis-build.sh
script to the scripts/ directory as well.
The data dictionaries built in the compile tests are useful during
host software testing, so run all the compile tests sequentially in a
single VM and save the data dictionaries after each build. Also,
build all the config files found in the test/configs/ directory.
Create the python virtualenv environment during the install phase and
invoke the klippy.py host software in the build phase to perform a
basic host software sanity check.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-02-26 14:58:49 -05:00
a6b0649cb1
test: Add travis CI
...
Signed-off-by: Sebastian Meyer <ich@sebmeyer.de>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-02-25 10:54:59 -05:00
Florian Heilmann