3diy
/
klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
2,061 Commits 1 Branch 0 Tags 27 MiB
Commit Graph

2061 Commits

Author SHA1 Message Date
Kevin O'Connor 2d864489a0 docs: Update main README file to point to website 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-04-20 13:43:35 -04:00
Kevin O'Connor b6637c6c73 config: Add button support for anet a8 
Reported by @noud-github.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-04-19 10:43:22 -04:00
Kevin O'Connor 8524602b6e docs: Fix inclusion of CONTRIBUTING.md in the automatic html generation 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-04-18 23:10:32 -04:00
Kevin O'Connor 17dd6e5097 docs: Fix markdown table layout in html rendering 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-04-18 22:56:56 -04:00
Kevin O'Connor b5f79d5e77 docs: Simplify main html page now that there is a logo 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-04-18 22:37:56 -04:00
Kevin O'Connor 57cf0759c0 docs: Add logos to web page 
Also, move docs/index.md to docs/_layouts/home.html.  Add a
docs/_layouts/README file.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-04-18 22:35:35 -04:00
Kevin O'Connor 85c01d4b6a docs: Minor node changes to klipper logo 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-04-18 11:42:40 -04:00
Kevin O'Connor 49b18a6be7 docs: Update logo so that edges overlap 
Overlapping edges reduce the effects of anti-aliasing.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-04-18 11:31:29 -04:00
Kevin O'Connor 9b960e63fb docs: Add a Klipper logo 
Signed-off-by: Jonne Kuusela <johnedwa@gmail.com>
Signed-off-by: Michael J Shephard <michael.j.shephard@gmail.com>
Signed-off-by: Thomas Herrmann <therrmann23@gmail.com>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-04-18 11:31:29 -04:00
Kevin O'Connor 6f34ba59cb docs: Add an index page for the www.klipper3d.org website 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-04-16 22:00:35 -04:00
Kevin O'Connor 4739e28137 docs: Add a github pages html template 
Add an html template so that each page has a navbar at the top and a
sidebar on the left with an auto-generated table of contents.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-04-16 20:55:41 -04:00
Kevin O'Connor 64e7235e48 docs: Rewrite the Overview.md - just list documents by category 
Replace the Overview.md document description with a list of documents
and a brief description of their contents.  The goal is to make it
easier for users to find information.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-04-16 20:45:00 -04:00
Kevin O'Connor cb04e4c45d docs: Fix alignment of tmc2208.svg 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-04-16 11:34:45 -04:00
Martin Nowroth 60bc93f36b temperature_fan: Add gcode command for temperature_fan.py (#1520) 
Adding gcode command for setting the target temperature of temperature_fan.
Example gcode: SET_TEMPERATURE_FAN_TARGET temperature_fan=chamber target=35.0

Signed-off-by: Martin Nowroth <madnoth@gmail.com>
 2019-04-15 21:13:29 -04:00
Len Trigg 1102c6c232 tsl1401cl_filament_width_sensor: Fix incorrect math in filament width sensor. (#1541) 
The parameter to the M221 command should be the ratio of the nominal to
measured filament area, rather than the ratio of the diameters. Since we
are taking the ratio, most of the area calculation cancels out.

Fixes #1535.

Signed-off-by: Len Trigg <lenbok@gmail.com>
 2019-04-15 21:11:26 -04:00
Dmitry 1b92af6078 display: Add ST7567 display support (#1540) 
Signed-off-by: Dmitry Budaev <condemil@gmail.com>
 2019-04-15 21:07:29 -04:00
Kevin O'Connor c440c6b7aa docs: Start of google pages _config.yml file 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-04-15 11:04:23 -04:00
Kevin O'Connor e3df39245f docs: Fixup github pages 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-04-14 22:41:23 -04:00
KevinOConnor 8a6d415745 Update CNAME 2019-04-14 21:25:54 -04:00
KevinOConnor b90a04a5cf Create CNAME 2019-04-14 21:21:14 -04:00
KevinOConnor 5068c8b088 Set theme jekyll-theme-leap-day 2019-04-14 21:18:21 -04:00
KevinOConnor 63f8d8cc79 Set theme jekyll-theme-leap-day 2019-04-14 21:17:52 -04:00
Kevin O'Connor 8bc9f39c58 docs: Avoid using .. in markdown links 
Using .. in the markdown link can confuse some document processors.
Use an absolute link to github instead.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-04-14 21:12:21 -04:00
Trevor Jones 9cb21de68e virtual_sdcard: consistent sorting (#1387) 
Signed-off-by: Trevor Jones <trevorjones141@gmail.com>
 2019-04-14 11:34:22 -04:00
Daniel 7373e92092 serialhdl: Enforce exclusive access on POSIX, this is default behavior on windows. (#1216) 
Signed-off-by: Daniel Joyce <daniel.a.joyce@gmail.com>
 2019-04-14 11:27:43 -04:00
Kevin O'Connor 41ce7cdf1c klippy-requirements: Update Jinja2 version 
There's a security bulletin for Jinja2 v2.10 (CVE-2019-10906).  This
wont impact Klipper, but best to upgrade the package requirements to
avoid getting security alerts.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-04-14 11:20:04 -04:00
Janar Sööt 0a392b6543 menu: initial support for analog buttons (#977) 
Signed-off-by: Janar Sööt <janar.soot@gmail.com>
 2019-04-14 11:18:52 -04:00
Kevin O'Connor d7e1061c63 bus: Don't reserve any pins if BUS_PINS_x is not defined 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-04-07 20:43:23 -04:00
Matt Baker 38f3d65ac5 lpc176x: refactor usbserial to use udelay helper. 
Signed-off-by: Matt Baker <baker.matt.j@gmail.com>
 2019-04-06 20:53:15 -04:00
Matt Baker e83071c9fe lpc176x: force minimum usb disconnect time 
Fixes GitHub Issue #1499. Resolves USB hang by forcing a minimum
USB disconnection time at boot.

Signed-off-by: Matt Baker <baker.matt.j@gmail.com>
 2019-04-06 20:53:15 -04:00
Kevin O'Connor 04adde9a02 docs: Update Installation.md to point to list of supported ARM mcus 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-04-06 18:47:02 -04:00
Kevin O'Connor 62bdc2709f config: Update generic-bigtreetech-skr-v1.3.cfg with e0/e1 defs 
Use the HE0 for the extruder0 heater and add comments describing the
nominal extruder1 pins.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-04-06 16:18:15 -04:00
Janne Grunau 478a916f51 replicape: add support for Linux hardware PWM (#1443) 
The servo pins (P9_14/P9_16) are muxed to the SOCs hardware PWM unit
driven by a 13MHz GP timer. They have to be driven by the linux host
mcu. This commits adds hardware PWM support using the linux sysfs
user space interface.

The servo pins can be specified as "replicape:servo0" and
"replicape:servo1". Removes the "servo0_enable", "servo1_enable"
configuration parameters.
Fixes #1105.

Signed-off-by: Janne Grunau <janne-3d@jannau.net>
 2019-04-06 13:51:51 -04:00
Kevin O'Connor 8c54fc8753 config: Minor change to generic-bigtreetech-skr-v1.3.cfg 
Interpolate is enabled by default.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-04-05 20:07:13 -04:00
Aleksander Sobolewski ccc1107dbe config: Generic board BIGTREETECH SKR V.1.3 config 
Signed-off-by: Aleksander Sobolewski <aleks.sobolewski@outlook.com>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-04-05 19:56:22 -04:00
Kevin O'Connor 1c56ba0ca7 config: Update generic-bigtreetech-skr-v1.1.cfg - make flash should now work 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-04-05 19:51:10 -04:00
Janne Grunau aab89e7f85 linux: add support for Linux hardware PWM 
The replicape servo pins (P9_14/P9_16) are muxed to the SOCs hardware
PWM unit driven by a 13MHz GP timer. They have to be driven by the
linux host mcu. This commits adds hardware PWM support using the linux
sysfs user space interface.

Signed-off-by: Janne Grunau <janne-3d@jannau.net>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-04-05 19:06:15 -04:00
Janne Grunau e6c3eeafd7 pwmcmds: allow 16-bit resolution 
Signed-off-by: Janne Grunau <janne-3d@jannau.net>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-04-05 19:02:48 -04:00
Kevin O'Connor de124677b0 docs: Update BLTouch.md to refer to Probe_Calibrate.md for offset config 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-04-05 18:22:57 -04:00
Kevin O'Connor 9f9262cba8 docs: Minor wording changes to BLTouch.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-04-05 18:20:21 -04:00
Kevin O'Connor 54a2c5d58e BLTouch: Use G90 in the BLTouch.md homing_override example 
Reported by @sgtnoodle.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-04-05 17:49:58 -04:00
Kevin O'Connor a5a6ae83ff docs: Wrap BLTouch.md to 80 columns. 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-04-05 17:48:51 -04:00
Kevin O'Connor 6318bdc99b docs: Note the python software dependency update in Config_Changes.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-04-05 11:20:36 -04:00
Kevin O'Connor 516fbf4f32 klippy: Report the underlying error on an internal error during connect 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-04-04 18:38:46 -04:00
Kevin O'Connor 79ecee0996 homing_override: Use gcode_macro style templates on gcode 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-04-04 18:35:23 -04:00
Kevin O'Connor 7d246e2624 probe: Use gcode_macro style templates on activate/deactivate_gcode 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-04-04 18:35:23 -04:00
Kevin O'Connor 486c07c190 gcode_macro: Evaluate macros using Jinja2 template engine 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-04-04 18:35:23 -04:00
Kevin O'Connor 890a5ea6bb scripts: Update klippy-requirements.txt to latest version of packages 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-04-04 18:35:23 -04:00
Kevin O'Connor e6157c1600 atsamd: Minor whitespace changes to sercom.c 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-04-04 18:30:05 -04:00
Kevin O'Connor 0615ab5f89 docs: Note the use of bus enumerations in Config_Changes.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-04-04 18:30:04 -04:00