Commit Graph

78 Commits

Author SHA1 Message Date
Kevin O'Connor 170b9678fb display: Don't error on an out of range M73 request
No need to report an error if the M73 is not between 0 and 100 - just
display the nearest valid value.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-09-25 20:51:51 -04:00
Janar Sööt 18b56c3cda menu: vsdcard - scroll long filenames (#694)
Signed-off-by: Janar Sööt <janar.soot@gmail.com>
2018-09-25 14:52:23 -04:00
Kevin O'Connor f80456a698 configfile: Move config file code from klippy.py to new file
Add a klippy/configfile.py file with the code needed to read the main
printer config file.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-09-25 13:48:46 -04:00
Janar Sööt 5144c5f01e menu: new fast step rate feature
Signed-off-by: Janar Sööt <janar.soot@gmail.com>
2018-09-21 19:29:30 -04:00
Kevin O'Connor 1379a59085 st7920: No need to clear glyph framebuffer before programming glyphs
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-09-21 16:39:38 -04:00
Kevin O'Connor 7cca8d970a hd44780: Simplify framebuffer access
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-09-21 16:39:38 -04:00
Kevin O'Connor 742d6481a9 st7920: Simplify framebuffer access
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-09-21 16:39:38 -04:00
Kevin O'Connor 05ba62600c st7920: Support writing degrees symbol
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-09-21 16:39:38 -04:00
Kevin O'Connor a4e2540f14 uc1701: Support writing degrees symbol
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-09-21 16:39:38 -04:00
Kevin O'Connor 30a49d3186 display: Use write_glyph() when writing special characters
Always use the write_glyph() method when writing special characters
during status screen updates.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-09-21 16:39:38 -04:00
Kevin O'Connor c8d9d575a1 display: Support writing single character glyphs using write_glyph()
Add write_glyph() support to hd44780.py.  Update uc1701.py and
st7920.py to support writing single character glyphs via
write_glyph().

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-09-21 16:39:38 -04:00
Kevin O'Connor 2a5778be3a display: Move icon drawing from display.py to lcd_chip code
Move the st7920 icon rendering optimizations from display.py to
st7920.py.  This simplifies the code for other displays.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-09-21 16:39:38 -04:00
Kevin O'Connor 2857255ef1 icons: Add the bed to the bed heating animations
It isn't necessary to use the st7920's xor capabilities when drawing
the bed heating animations.  This makes it easier to use the icons for
other displays.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-09-21 16:39:38 -04:00
Janar Sööt 7b6a44e8f9 menu: New Tune submenu (#653)
Signed-off-by: Janar Sööt <janar.soot@gmail.com>
2018-09-17 08:26:59 -04:00
Kevin O'Connor 30013a1fb8 mcu: Rename add_config_object() to register_config_callback()
Change the name of the config registration method and pass an explicit
reference to the callback to the new method.  This makes the
relationship between mcu registration and build_config() more clear in
the calling code.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-09-03 11:48:22 -04:00
Kevin O'Connor ce79b6ca00 menu: Queue g-code commands to avoid command reordering
The gcode.run_script() code can pause which can result in the menu
code being called reentrant - avoid that by queuing the gcode commands
within the menu code.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-09-02 12:14:27 -04:00
Janar Sööt 65f0fd6238 display menu module for klipper
Signed-off-by: Janar Sööt <janar.soot@gmail.com>
2018-08-20 22:33:05 -04:00
Kevin O'Connor 273a98d39a pins: Explicitly pass can_invert and can_pullup to lookup_pin()
Don't pass pin_type to lookup_pin() - instead, if a pin can be
inverted or can have a pullup, then the caller must explicitly specify
that when calling lookup_pin().  This simplifies the code for the
cases where it is not valid to invert or pullup.

Explicitly pass the pin_type to setup_pin() and have ppins.setup_pin()
apply default pullup and invert flags.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-07-26 09:44:45 -04:00
Kevin O'Connor b4f03e8363 docs: Add display g-code commands to docs/G-Codes.md
Add M117 and M73 to the list of supported G-Codes.

Also, remove M117 from the list of commands reported by the HELP
command as that command is typically only used to list "extended
g-code" commands.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-07-08 10:12:23 -04:00
Arksine 640169310f display: fix for 128 x 64 pixel displays
Right justify fan speed and feed rate, keep progress centered.

Signed-off-by: Eric Callahan <arksine.code@gmail.com>
2018-06-28 13:11:44 -04:00
Kevin O'Connor efb27f095c build: Cleanup whitespace errors
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-06-28 13:00:20 -04:00
Arksine e11851276d display: uc1701 spi fix
Signed-off-by: Eric Callahan <arksine.code@gmail.com>
2018-06-28 10:01:57 -04:00
Arksine 593b4d2656 display: add UC1701 graphics controller support
Signed-off-by: Eric Callahan <arksine.code@gmail.com>
2018-06-27 19:46:38 -04:00
Arksine 19d6205492 display: add VGA font
Font from fntcol16.zip package:
ftp://ftp.simtel.net/pub/simtelnet/msdos/screen/fntcol16.zip
(c) Joseph Gil
Font is public domain

Signed-off-by: Eric Callahan <arksine.code@gmail.com>
2018-06-27 19:46:38 -04:00
Kevin O'Connor 483c51e864 display: Move icons to their own module
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-06-27 13:18:03 -04:00
Kevin O'Connor e907253dba display: Move st7920 code to its own module
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-06-27 13:18:03 -04:00
Kevin O'Connor f85b43a789 display: Move hd44780 code to its own module
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-06-27 13:18:03 -04:00
Kevin O'Connor 373c7ff301 display: Move klippy/extras/display.py to klippy/extras/display/display.py
Move the display code into its own directory.  This is in preparation
for splitting it up into its own modules.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-06-27 13:18:03 -04:00