Commit Graph

44 Commits

Author SHA1 Message Date
Kevin O'Connor fedf90680e homing: Pass printer instead of toolhead object to Homing class
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-16 13:09:23 -04:00
Kevin O'Connor d32506bd2e homing: Move homing offset adjustment logic to generic homing code
Move the "stepper phase" adjustment logic from the kinematic classes
to the generic homing.py code.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-10 14:30:09 -04:00
Kevin O'Connor d4bf51231a homing: Implement second home from homing.py
Move the logic for performing the second home from the kinematics
classes to the generic homing code.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-10 12:14:27 -04:00
Kevin O'Connor a9a0bb87fa probe: Verify the toolhead moves at least some distance on a probe
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-01 11:12:30 -04:00
Kevin O'Connor 89835940f7 query_endstops: Move QUERY_ENDSTOP command to it own extras/ module
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-07-16 10:06:30 -04:00
Kevin O'Connor 0216201cb6 delta: Rename get_position() to calc_position()
Calculating the cartesian position from the stepper positions can be
complex and cpu intensive, so rename it to calc_position() to be more
descriptive.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-06-22 14:09:01 -04:00
Kevin O'Connor 0791c69499 stepper: Replace PrinterHomingStepper with PrinterRail
Update the code to use the term "rail" when dealing with a motor
controlled "axis".  A rail has a series of steppers and endstops that
control that motor controlled "axis".

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-06-22 14:09:01 -04:00
Kevin O'Connor 6c3db80d89 homing: Apply speed rounding after calling home_prepare()
The step speed rounding and the cpu delay must be run after running
the endstop specific preparation code.  Otherwise, a delay in the
home_prepare() code could undo those calculations.  Specifically, this
could lead to errors on a multi-mcu setup when the Z is homed using a
virtual_z_offset and there is a delay in the activate_gcode section.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-05-14 11:40:35 -04:00
Kevin O'Connor 451f7d5672 gcode: Position returned by M114 should be relative to last G92
It looks like OctoPrint is expecting the result from M114 to be
relative to the last G92 command.  Also, introduce GET_POSITION to
report the actual location that the printer is at.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-03-15 20:00:51 -04:00
cruwaller 923954772f homing: allow to disable homing retract
Homing retract can be disabled by setting homing_retract_dist to 0.

Signed-off-by: Petri Honkala <cruwaller@gmail.com>
2018-03-06 13:45:48 -05:00
Kevin O'Connor 1a67902858 homing_override: Allow moves prior to homing an axis
Add support for disabling homing checks via the homing_override
mechanism.  This may be useful to move an axis prior to homing it.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-01-28 12:19:26 -05:00
Kevin O'Connor e38c7df064 probe: Support activate/deactivate scripts on each probe
Allow a set of g-code scripts to be run on each probe invocation.
This may be useful for probes that need to be setup before they are
useful (eg, with servo actuated probes).

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-01-28 12:19:26 -05:00
Kevin O'Connor ce9db609ad probe: Initial support for Z-Probe hardware
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-01-28 12:19:26 -05:00
Kevin O'Connor 1d21bf66c6 homing: Handle speed rounding when homing speed greater than max_velocity
Commit 002dc0df added rounding to the homing speed, but it did not
work if the configured homing speed was less than the printer's
maximum velocity.  Move the speed rounding from stepper.py to
homing.py and make sure the rounded speed is less than the maximum
speed.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-12-20 14:41:20 -05:00
Kevin O'Connor f6d4284d5c homing: Directly interact with the kinematic class on query_endstops()
Move the query_endstop logic out of toolhead.py and into homing.py.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-12-06 19:13:54 -05:00
Kevin O'Connor 8d9ca6f2dd homing: Directly interact with the kinematic class when homing
Move the homing logic out of toolhead.py and into homing.py.  This
simplifies the toolhead logic and centralizes the homing code.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-12-06 19:13:54 -05:00
Kevin O'Connor b340fdcc4a homing: Make sure to clean up homing state even if homing fails
Make sure to always call MCU_endstop.home_wait() if
MCU_endstop.home_start() is invoked.  Rename
MCU_stepper.note_homing_triggered() to note_homing_end() and make sure
it is always called if MCU_stepper.note_homing_start() is invoked.

With these changes, MCU_endstop.home_finalize() is no longer needed.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-12-06 19:13:53 -05:00
Kevin O'Connor 7785d3a87d homing: Pass list of endstops (not steppers) to the homing code
The homing code wants the list of endstops to enable during a homing
operation - it's confusing to pass the steppers.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-12-06 18:49:14 -05:00
Kevin O'Connor 6930a7de8d homing: Base homing cpu delay on estimated number of steps needed
Instead of adding 250ms to each homing operation add a time relative
to the number of estimated steps that are to be generated.  This
scales the delay to really large axes without adding a delay for
normal users.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-11-29 19:55:25 -05:00
Kevin O'Connor 38643f52c9 stepper: Add get_endstops() / set_position wrappers
Add wrappers around mcu_endstop and mcu_stepper so that the kinematic
classes do not need to directly access these low-level classes.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-11-18 17:36:45 -05:00
Kevin O'Connor 3b9b4e4d6f endstop: Eliminate end_stop_set_oversample command
Pass the sample_ticks and sample_count parameters directly in the
end_stop_home command instead.  This simplifies the code.

Also, simplify calculation of next wakeup time in
end_stop_oversample_event().

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-10-12 11:59:27 -04:00
Kevin O'Connor ce9523fb90 gcode: Report the raw MCU position from the M114 command
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-10-03 22:03:52 -04:00
Kevin O'Connor 6469cce2bc toolhead: Make sure reset_print_time() doesn't go backwards in time
Update the homing code to pass in the start of the homing operation to
toolhead.reset_print_time().  This prevents an error when batch
processing gcode files that contain multiple homing operations.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-09-27 19:21:26 -04:00
Kevin O'Connor 857eb01bfa homing: Move query_endstop() code from kinematic classes to homing.py
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-09-19 17:25:42 -04:00
Kevin O'Connor a100f174f9 mcu: Pass print_time directly to MCU calls
Now that the print_time is always synchronized with the mcu_time,
there is no longer a need to track mcu_time as a separate quantity.
Eliminate references to mcu_time from the code and pass print_time
directly in its place.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-09-19 17:25:42 -04:00
Kevin O'Connor 78f4c25a14 homing: Add a small delay before each homing operation
The homing operation can be cpu intensive for the host software.  Add
a small (250ms) delay before homing so that the host has additional
time to process the command before it is due on the mcu.  This is
intended to work around some reports of "timer too close" errors
during Z homing on RPi2 hosts and printers with high precision Z
positioning.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-08-29 18:02:36 -04:00
Kevin O'Connor 68d6788413 mcu: Add get_mcu() call to the mcu oid objects
Allow external code to obtain the mcu object that controls a pin setup
with setup_pin().  Also, don't bother defining print_to_mcu_time() and
system_to_mcu_time() on each pin object as they can be obtained via
the new get_mcu() method.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-08-29 17:59:27 -04:00
Kevin O'Connor 1bc3e0a678 klippy: Use newer "except XYZError as e" python syntax
Use the newer syntax for python exceptions.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-06-10 00:08:06 -04:00
Kevin O'Connor 89f5452ddb gcode: Rework homing to use greenlets
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2016-12-09 17:09:51 -05:00
Kevin O'Connor a6de1db94d gcode: Rework endstop query to use greenlets
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2016-12-09 17:09:51 -05:00
Kevin O'Connor f547cab710 klippy: No need to define __str__ and __init__ methods on exception classes
The base Exception class already defines these methods.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2016-11-29 18:49:12 -05:00
Kevin O'Connor 9755182adf homing: Check homing distance to verify endstop trigger after retract
Instead of checking the endstop trigger directly after a retract move,
verify some distance is traveled during the following homing
operation.  This reduces the amount of synchronization between mcu and
host during homing.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2016-11-28 11:23:26 -05:00
Kevin O'Connor ab1972d1cf homing: Verify the endstops are no longer triggered after retract move
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2016-11-18 14:17:53 -05:00
Kevin O'Connor e0aa067cc9 homing: Check for timeout during homing operation
Should a homing move complete without hitting the endstop, then
disable motors, disable the endstop checking, and report the error to
the user.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2016-11-18 14:17:53 -05:00
Kevin O'Connor 4f30dce64f homing: Add EndstopMoveError wrapper around EndstopError
Allow an EndstopError to be raised without a destination position.
Introduce EndstopMoveError wrapper so that current callers can
continue to pass in a move destination.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2016-11-18 14:17:53 -05:00
Kevin O'Connor 2b5b899d35 homing: Direct stepper phase detection from kinematic classes
Change the scheduling of the final homed position (which takes into
account the stepper phases) so that it is scheduled from the kinematic
classes instead of from the toolhead class.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2016-11-18 14:04:10 -05:00
Kevin O'Connor 781cf608d7 homing: Create Homing class from gcode
Create the Homing class in the gcode handler instead of in the
kinematic classes.  This will make it easier to pass error messages
back to the user.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2016-11-18 14:04:09 -05:00
Kevin O'Connor 9e1059afb4 homing: Create QueryEndstops class from gcode
Create the QueryEndstops in the gcode handler instead of in the
kinematic classes.  This simplifies the gcode handler as it can
directly register its response callback.

Also, store the stepper name in the stepper class.  Also, propagate
the print_time of the query request to the mcu_endstop class.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2016-11-18 14:04:09 -05:00
Kevin O'Connor b53da365a1 cartesian: Enforce endstop min and max boundaries
Verify that each move command is within range of the configured
minimum and maximum for each axis.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2016-09-30 21:36:51 -04:00
Kevin O'Connor 0685802cb8 homing: Support querying the current status of endstops
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2016-09-22 11:29:27 -04:00
Kevin O'Connor e52113a319 mcu: convert stepper, endstop, and digital_out to take mcu_time
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2016-08-24 16:42:25 -04:00
Kevin O'Connor 92f81d51f4 homing: Move low-level coordinate manipulation to kinematic class
Rework the code so that the kinematic class (currently just
cartesian.py) has more control over the homing process.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2016-07-25 23:47:30 -04:00
Kevin O'Connor 20ae4e5d98 cartesian: Rename CartKinematics class to ToolHead
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2016-07-10 22:47:13 -04:00
Kevin O'Connor f582a36e4d Initial commit of source code.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2016-05-25 11:37:40 -04:00