Commit Graph

21 Commits

Author SHA1 Message Date
Kevin O'Connor 1b08553a42 angle: Report tle5012b temperature
Export the tle5012b temperature readings when performing measurements.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-03-29 20:34:46 -04:00
Misterke 8b0c6fcb08 bed_mesh: Report actual mesh profiles as status
Report the actual profiles available via BED_MESH_PROFILE
via the status for use by clients.

Signed-off-by: Kurt Haenen <kurt.haenen@gmail.com>
2022-02-16 13:42:19 -05:00
Yifei Ding 98af5dffe6
docs: Improve filament width sensor documentation (#5058)
Add Filament Width Sensor to G-Codes.md

Remove Redundant Filament Width Sensor Entries

Remove Duplicate Status Reference In Hall Filament Width Sensor

Fix Indentation For Filament Width Sensors

Signed-off-by: Yifei Ding<yifeiding@protonmail.com>
2021-12-27 12:41:31 -05:00
Yifei Ding c0ea48a582 docs: Match Single Blank Line Above and Below A Title
Signed-off-by: Yifei Ding <yifeiding@protonmail.com>
2021-11-19 10:25:06 -05:00
Philipp Temminghoff 64e4649877
tmc: add current values to get_status() (#4696)
Signed-off-by: Philipp Temminghoff <philipptemminghoff@gmail.com>
2021-10-11 12:03:08 -04:00
Kevin O'Connor 46167cae67 configfile: Add support for reporting deprecated options
Add a new printer.configfile.warnings with a list of config features
that are deprecated.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-09-16 13:44:54 -04:00
Kevin O'Connor 5fd1c9853d tmc: Add support for a get_status() method
Export mcu_phase_offset and drv_status information.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-08-30 12:00:46 -04:00
Matt Heath df98470659 docs: Fix reference to neopixel color_data
Fix reference to neopixel color_data in status reference documentation
so the given example works as expected.

Signed-off-by: Matt Heath <hello@mattheath.com>
2021-08-17 14:43:51 -04:00
Kevin O'Connor 60aa05829f motion_report: Add get_status() method with current requested toolhead position
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-07-29 16:53:32 -04:00
Damien cff61605fb docs : make modifications to all md files to make them compatible with mkdocs
all markdown files must have a single H1 heading at the top.

Signed-off-by: Damien Martin <damlobster@gmail.com>

Update CNAME
2021-07-27 13:15:25 -04:00
Tircown 4d559633e3
kinematics: Add dual_carriage to hybrid-corexyz (#4296)
- Add dual_carriage abilities for hybrid-corexy and hybrid-corexz
- Introduce the module idex_mode
- Fix add_stepper to the correct rail in hybrid-corexy

Signed-off-by: Fabrice GALLET <tircown@gmail.com>
2021-06-27 18:37:05 -04:00
Kamil Trzcinski f1091a484b virtual_sdcard: add `file_path` and `file_size` to `status`
This provides a comprehensive information if currently
we have a file loaded.

Signed-off-by: Kamil Trzcinski <ayufan@ayufan.eu>
2021-06-22 15:15:03 -04:00
Eric Callahan 8bcfaa53aa docs: add status documentaton for neopixel and dotstar
Signed-off-by:  Eric Callahan <arksine.code@gmail.com>
2021-06-18 10:53:12 -04:00
Kamil Trzcinski d2c2aaf55d extruder: expose `can_extrude` flag based on temperature
Sometimes an automated filament load is implemented,
but extruder might not always extrude filament.

This adds a flag to check if this operation is possible.

Signed-off-by: Kamil Trzcinski <ayufan@ayufan.eu>
2021-06-14 12:56:50 -04:00
Kevin O'Connor 93b9a85d19 endstop_phase: Add support for reporting phase information via get_status()
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-06-03 22:27:30 -04:00
Michael Rose 27f8cf025e
z_tilt: expose an 'applied' status to allow macros to skip QGL/Z_TILT_ADJUST (#4313)
This is useful for macros that'd like to skip QGL if already leveled,
e.g.:

```
    {% if not printer.quad_gantry_level.applied %}
        QUAD_GANTRY_LEVEL
    {% endif %}
```

Signed-off-by: Michael Rose <elementation@gmail.com>
2021-06-02 11:11:19 -04:00
Kevin O'Connor 8e74e6aa09 docs: Fix typo in Status_Reference.md
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-05-28 21:02:14 -04:00
Kevin O'Connor 977c334e2e docs: Avoid link descriptions that span multiple lines
The Jekyll markdown renderer gets confused by links that span multiple
lines.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-05-28 20:58:32 -04:00
Alex Zellner 60352f4b67
filament_motion_sensor: add get_status (#4281)
Signed-off-by: Alex Zellner <alexander.zellner@googlemail.com>
2021-05-11 13:17:22 -04:00
Kevin O'Connor ebbb21be00 docs: Update Status_Reference.md for better Jekyll rendering
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-04-28 20:38:07 -04:00
Kevin O'Connor af7f27542f docs: Move status field reference to new Status_Reference.md file
Move the reference of "printer" status fields from
Command_Templates.md to a new Status_Reference.md file.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-04-28 20:32:00 -04:00