1f5848fc1a
adc_scaled: Add support for Duet2 Maestro "vref monitoring"
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-09-09 22:20:54 -04:00
9b2816477b
graph_temp_sensor: Add support for graphing sensor resistance
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-09-09 17:14:09 -04:00
fc85675145
gcode_button: Add support for analog buttons
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-09-09 14:21:30 -04:00
13ee6032ae
mcu: Use schedule_pwm_out instead of set_pwm_out on a restart
...
Some mcu implementations don't like it when the pwm pin is configured
twice, so use the normal schedule_pwm_out implementation to update on
a restart.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-09-09 13:16:02 -04:00
9197975625
docs: Note that FORCE_MOVE can lead to "No next step" errors in G-Codes.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-09-08 10:18:28 -04:00
c285f8b6cf
klippy: Improve handling of reactor.run() exceptions
...
Try to invoke a shutdown on an unhandled exception from reactor.run().
If that fails, try to do a clean exit.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-09-06 12:45:27 -04:00
1cdf0d474d
sensor_adxl345: Remove unused stop_time parameter
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-09-05 09:18:59 -04:00
09bc207189
graph_accelerometer: Add tool to graph accelerometer results
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-09-05 09:11:04 -04:00
3405095f0a
adxl345: Add support for adxl345 accelerometer
...
Add support for taking measurements from an adxl345 accelerometer via
SPI interface.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-09-05 09:11:04 -04:00
2b2b610cff
uc1701: Improve Python3 compatibility
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-09-04 22:29:55 -04:00
d69a496b83
hd44780: Improve Python3 compatibility
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-09-04 22:14:06 -04:00
c3e9999e0c
docs: Update OctoPrint and OctoPi versions in Installation.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-09-04 21:24:26 -04:00
166ce06aea
buttons: Improve python3 compatibility
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-09-04 19:33:04 -04:00
5cce7f4d55
pid_calibrate: Update for improved python3 compatibility
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-09-04 19:30:18 -04:00
9406baf40b
config: fixed update file extension for TronXY X5SA
...
Signed-off-by: Vladimir Serov <me@cab404.ru>
2020-09-04 19:28:48 -04:00
3bcb6970f5
probe: Make sure z is homed before probing
...
Warn if the Z axis is not homed before attempting to probe. This
improves the error message.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-09-04 15:47:52 -04:00
08adecd226
homing: Prefer printer.command_error() instead of homing.CommandError()
...
Update callers to use the printer.command_error reference instead of
directly using homing.CommandError() when raising or catching errors.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-09-04 12:10:36 -04:00
f6dd97b784
homing: Remove EndstopError
...
There's no reason to distinguish between an EndstopError and a
CommandError, so just use CommandError.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-09-04 11:41:57 -04:00
1f3a160f47
toolhead: Add a move.move_error() helper
...
Move the EndstopMoveError() code from homing.py to a new method in the
toolhead Move class.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-09-03 16:22:54 -04:00
d0ed6e5705
input_shaper: Fix typo in SET_INPUT_SHAPER report of shaper_type_y
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-09-03 14:19:55 -04:00
61fa7e82d9
travis-install: Minor change to virtualenv command-line arguments
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-09-03 13:27:27 -04:00
81865b5940
install-octopi: Use "virtualenv -p python2" to ensure python2 is selected
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-09-03 13:19:55 -04:00
6c872c71a7
quad_gantry_level: Add additional comments on how leveling works
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-09-03 12:09:02 -04:00
c69527e2b0
spi_temperature: Simplify and comment MAX31865 temperature calculations
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-09-02 10:04:35 -04:00
37d7742468
spi_temperature: fix MAX31865 temperature conversion ( #3274 )
...
Signed-off-by: Adrian Keet <arkeet@gmail.com>
2020-09-02 09:32:30 -04:00
7c5b108531
config: Replicape config updates with pin aliases ( #3269 )
...
Adding board_pins section.
Added linux host MCU board pin aliases for endstops.
Also added a sample filament switch sensor config.
Signed-off-by: Jon Charnas <goeland86@gmail.com>
2020-09-01 11:00:48 -04:00
d0c5802fe2
config: Add printer-creality-ender3pro-2020.cfg to printers.test
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-08-30 21:53:26 -04:00
99251015fa
config: Added example config for Ender 3 Pro with 32-bit Creality 4.2.2 board ( #3264 )
...
From July 2020, Ender 3 Pros came with a 32-bit Creality 4.2.2 board, similar to the Ender 3 V2. Unlike the Ender 3 V2, it comes with the ST7920 LCD screen and HR4988 steppers. Using the config file already in Marlin source, I came up with this klipper config file.
Signed-off-by: Matthias Liffers <m@tthi.as>
2020-08-30 21:49:55 -04:00
12529ef6cd
update_chitu: Rename script and minor changes
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-08-30 13:11:34 -04:00
1d201c3592
config: Minor updates to printer-tronxy-x5sa-v6-2019.cfg
...
Minor changes to default config and add to printers.test.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-08-30 13:04:40 -04:00
15853da28c
config: Added TronXY X5SA support ( #3265 )
...
Added printer-tronxy-x5sa-v6 config.
Added "chitu" bootloader option to stm32 Kconfig.
Added chitu_crypt.
Signed-off-by: Vladimir Serov <me@cab404.ru>
2020-08-30 12:59:28 -04:00
a7defdcad0
kin_shaper: Fix check for optimized X or Y only calculations
...
The optimized version is only available if it's the only axis used.
This fixes input_shaper on corexz.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-08-30 12:32:11 -04:00
08ddf25cf3
kin_shaper: Add an init_shaper() helper function
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-08-30 12:32:11 -04:00
d28e148ddc
kin_shaper: Group shaper setup code together
...
No code changes - just code movement.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-08-30 12:32:11 -04:00
0e21188cb2
kin_shaper: Allocate space for maximum number of shaper pulses in advance
...
Combine the shaper pulses and count of those pulses into a `struct
shaper_pulses`. Allocate space for the maximum number of pulses in
`struct input_shaper`.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-08-30 11:30:39 -04:00
b6a25393d3
webhooks: Add client_info parameter to "info" webhook
...
Allow clients to send their version info to klipper and arrange for
that info to be logged.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-08-26 10:12:58 -04:00
2bb6b0f58f
docs: Expand on host computer restrictions in the FAQ
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-08-26 10:11:21 -04:00
97da129793
menu: only render visible list items
...
Signed-off-by: Janar Sööt <janar.soot@gmail.com>
2020-08-26 10:08:12 -04:00
9459549db3
menu: fixing input gcode run issue on edit start
...
Signed-off-by: Janar Sööt <janar.soot@gmail.com>
2020-08-26 10:07:03 -04:00
37c379ddc5
stale-issue-bot: Enable github actions to handle stale issues
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-08-24 19:53:06 -04:00
ff6e879349
display: Allow redrawing the screen up to 10 times per second
...
Increase the maximum redraw rate from 4 times per second to 10 times
per second. Some users have reported slower rendering times as a
result of 8fa1c977
2020-08-24 19:02:30 -04:00
af43faa3f2
config: Tarantula Pro - Multiple tweaks and description change ( #3230 )
...
The following parameters have been tweaked:
- X endstop position has been set to -2, as per original marlin cofig
- Second Z axis disabled by default (this must be purchased as an
add-on)
The comment at the top of this file has also been modified to describe
the difference between this (old) model and the new (rebranded) Tevo
Tarantula pro.
Signed-off-by: Oliver Fawcett-Griffiths <olly@ollyfg.com>
2020-08-24 18:23:50 -04:00
6763210558
gcode: Fix out-of-order cmd_M112 reference
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-08-23 13:18:30 -04:00
37bbf161f8
adc_temperature: Minor simplification of default sensor registration
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-08-23 09:02:18 -04:00
bc30414362
config: Add example printer-tevo-tarantula-pro-2020.cfg config ( #3225 )
...
Signed-off-by: Oliver Fawcett-Griffiths <olly@ollyfg.com>
2020-08-23 08:35:01 -04:00
4a6360f2af
adc_temperature: Calculate "PT100 INA826" values from formula
...
Calculate the "PT100 INA826" values instead of using a voltage table.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-08-22 17:21:17 -04:00
d3e41b55b7
adc_temperature: Calculate PT1000 temperature/resistance pairs from formula
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-08-22 17:16:45 -04:00
2c76f7527d
lib: Add a .gitignore file for intermediate files in lib/ directory
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-08-21 11:34:06 -04:00
1286d3006c
gcode_move: Move GCodeMove class from gcode.py to new extras module
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-08-20 21:03:22 -04:00
b691e013f0
docs: Document printer.gcode_move variables in Command_Templates.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-08-20 21:03:22 -04:00
Kevin O'Connor