7d8c70363a
gcode_arcs: Add support for G2/G3 commands
...
R Still missing, also might be somewhat dirty since code is converted
into G1 commands.
Signed-off-by: Aleksej Vasiljkovic <achmed21@gmail.com>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-09-13 11:57:54 -04:00
361de30ad1
config: Note adc_voltage and pullup_resistance in adc_temperature module
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-09-11 00:31:48 -04:00
49779f13a2
filament_switch_sensor: Add a delay between dispatch of pause and execution of pause gcode
...
Signed-off-by: Eric Callahan <arksine.code@gmail.com>
2019-09-08 20:42:43 -04:00
0f1fcb017f
config: Add example generic-bigtreetech-skr-pro.cfg config
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-09-05 22:42:48 -04:00
1e3f6125fb
config: Add a description of the EXP1/EXP2 pin locations to sample-lcd.cfg
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-09-01 12:49:28 -04:00
e47fa04a6f
config: Add the "Fysetc Mini 12864Panel" to the example lcd configs
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-08-31 22:22:19 -04:00
04db5f95d2
config: Minor formatting change to sample-lcd.cfg
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-08-31 19:00:52 -04:00
f7f6680bf6
config: Use position_endstop=0 for Creality printers
...
The default position_endstop=0.5 is causing confusion for some new
users - change the default to 0.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-08-31 11:43:02 -04:00
5e2c60bd67
config: Add example config files for the Fysetc Cheetah boards
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-08-31 11:02:44 -04:00
f21f66a31f
config: Add example SKR mini-E3 config
...
Signed-off-by: Ashley Izat <ashleyi100@googlemail.com>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-08-29 10:19:05 -04:00
67ddac776d
config: Update bigtreetech skr boards to define EXP1/EXP2 plugs
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-08-19 21:40:20 -04:00
e817b85b78
config: Update several config files to use board aliases for lcd
...
Add a sample-lcd.cfg with the defintions for several common "reprap"
style LCD displays that use the EXP1/EXP2 plugs. Update several
config files to add EXP1/EXP2 board aliases.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-08-19 12:57:59 -04:00
bfbcb90751
board_pins: Add a new "extras" module to support per-board pin aliases
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-08-19 12:57:59 -04:00
a482ddf582
tmc2209: Add support for sensorless homing
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-08-19 12:05:09 -04:00
96fdb6ef36
uc1701: Add support for a reset line on SSD1306 displays
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-08-17 22:14:02 -04:00
9c40394248
config: Note that samples_tolerance can be used in the bltouch config
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-08-17 15:15:49 -04:00
a3980cebcc
neopixel: Add support for WS2811 RGB pixel color order
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-08-09 20:58:49 -04:00
3d38211b8a
extra: Add Safe Z home extra
...
Signed-off-by: Florian Heilmann <Florian.Heilmann@gmx.net>
2019-08-09 20:49:17 -04:00
09f323a038
config: Update example stepper amps in generic-printrboard.cfg
...
Reported by @Grumps49.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-08-09 20:43:23 -04:00
383fb1dbfd
config: Fix pins for E6 in generic-duet2-duex.cfg
...
Signed-off-by: Florian Heilmann <Florian.Heilmann@gmx.net>
2019-08-07 11:01:23 -04:00
4c09d8bf02
dotstar: Initial support for "dotstar" LEDs
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-08-06 19:44:32 -04:00
a730aec8bc
tmc_uart: Add support for configuring the uart address on tmc2209 chips
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-07-31 13:02:27 -04:00
745a8dc0ac
config: Add an example config file for the bigtreetech skr mini
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-07-30 21:42:20 -04:00
a878831d5e
mcp4728: Update to better match printrbot revf requirements
...
Reported by @Grumps49.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-07-26 11:02:56 -04:00
46041f5411
neopixel: Add support for daisy-chained chips
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-07-23 21:59:38 -04:00
abf3fa4b71
neopixel: Add support for setting a default color at startup
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-07-23 21:59:38 -04:00
4d90b60fdb
config: Fix example beeper pin in generic-bigtreetech-skr-v1.3.cfg
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-07-18 11:15:02 -04:00
b7bc96c3b2
neopixel: Add initial support for "neopixel" leds
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-07-12 21:44:01 -04:00
25438a7901
config: Simplify generic-bigtreetech-skr-v1.3.cfg
...
Move the TMC2208 and TMC2130 blocks to later in the file.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-07-12 08:28:10 -04:00
b2a8b0dd65
config: Update default serial setting of generic-duet2-duex.cfg
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-07-11 10:35:22 -04:00
a34613cf86
config: Add a simplified Duet2 Eth/Wifi example config file
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-07-11 10:35:22 -04:00
e2d8a6f02d
config: Rename generic-duet2.cfg to generic-duet2-duex.cfg
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-07-11 10:35:22 -04:00
0343d0c73a
firmware_retract: Remove z_hop support
...
The current z_hop support did not work correctly with common slicers
that change Z height between retract and unretract, and it did not
work correctly with slicers that issue a retract at the end of a print
and then at the beginning of the next print.
The z_hop support is therefore being removed until these issues can be
fixed.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-07-10 19:25:56 -04:00
a477c50592
config: Heater pins are inverted on the Duet2 Maestro
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-07-10 13:23:59 -04:00
e19a41d0dd
docs: Add documentation for [delayed_gcode]
...
Signed-off-by: Eric Callahan <arksine.code@gmail.com>
2019-07-01 11:09:30 -04:00
02e579f578
config: Fix stepper_bed step_distance description in example-polar.cfg
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-07-01 11:00:37 -04:00
57eb0e8975
docs: Update for latest changs to skew_correction
...
Signed-off-by: Eric Callahan <arksine.code@gmail.com>
2019-06-29 10:58:46 -04:00
7947dc3389
config: Use tmc2660 virtual_enable in generic-duet2.cfg
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-06-28 16:59:26 -04:00
b0c459d8bf
config: Use tmc2208 virtual_enable in generic-duet2-maestro.cfg
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-06-28 16:59:26 -04:00
a2e550d1cd
stepper: Add support for providing a list of pins to enable
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-06-28 16:59:26 -04:00
7702f0a027
tmc: Add support for virtual enable pins
...
Add support for enabling the stepper via the communication channel.
This improves support for boards with a shared enable line.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-06-28 16:59:26 -04:00
e5f74a64ed
polar: Add initial support for multiple bed rotations
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-06-28 10:00:40 -04:00
a3b4543c97
skew_correction: add documentation
...
Signed-Off-By: Eric Callahan <arksine.code@gmail.com>
2019-06-26 20:16:35 -04:00
79c24f95b3
config: Add example tmc2130 sections to SKR v1.3 board
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-06-25 13:49:35 -04:00
e18dddd1ab
config: No need to list all tmc drivers in endstop_phase description
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-06-23 12:27:09 -04:00
7173a2c427
config: Update example-extras.cfg for tmc2209
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-06-23 11:47:24 -04:00
c3467f5b35
config: Add generic-printrboard-g2.cfg config file
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-06-21 23:12:31 -04:00
daadb36cb4
gcode_button: Execute gcode when a button is pressed or released ( #1745 )
...
An extra to execute gcode when a hardware button is pressed or released. Uses the jinja2 templating system.
Inspired by pull request #545 from Miguel Moitinho miguel@moitinho.net and pull request #1098 from Paulo Drugos paulodrugos@gmail.com
Signed-off-by: Alec Plumb <alec@etherwalker.com>
2019-06-21 18:06:31 -04:00
c92aca74b5
probe: Add support for samples_tolerance
...
Add a check on the maximum Z distance between probe samples.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-06-21 14:06:20 -04:00
3e741a1f88
config: Clarify which boards use lpc1768 vs lpc1769 when known
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-06-20 11:23:30 -04:00
Aleksej Vasiljkovic