Commit Graph

859 Commits

Author SHA1 Message Date
Kevin O'Connor e4bb90a1ca bed_mesh: Do not automatically run G28 on BED_MESH_CALIBRATE / BED_MESH_MAP
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-22 11:26:01 -04:00
Kevin O'Connor f382762962 bed_tilt: Do not automatically run G28 on BED_TILT_CALIBRATE
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-22 11:26:01 -04:00
Kevin O'Connor 925562cfb1 delta_calibrate: Do not automatically run G28 on DELTA_CALIBRATE
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-22 11:26:01 -04:00
Kevin O'Connor 7efbc021a5 pid_calibrate: Add some comments on the calibration methodology
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-19 22:40:11 -04:00
Kevin O'Connor 29e0996858 display: Check for M117 inside of draw_status()
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-18 20:43:43 -04:00
Kevin O'Connor 2549ccd722 klippy: No need to return anything from _connect() method
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-18 15:58:52 -04:00
Kevin O'Connor 1e71909d02 endstop_phase: Add support for an ENDSTOP_PHASE_CALIBRATE command
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-16 13:09:49 -04:00
Kevin O'Connor def524bdf4 endstop_phase: Add support for detecting phase via TMC stepper drivers
The Trinamic stepper motor drivers are capable of reporting the
stepper phase - add support for using that capability to the
enddstop_phases module.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-16 13:09:23 -04:00
Kevin O'Connor a2df01b88e endstop_phase: Move endstop phase homing code to new "extras" module
Move the endstop phase tracking code from stepper.py to a new
extras/endstop_phase.py module.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-16 13:09:23 -04:00
Kevin O'Connor 216905ceca klippy: Add a basic event dispatch mechanism
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-16 13:09:23 -04:00
Kevin O'Connor fedf90680e homing: Pass printer instead of toolhead object to Homing class
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-16 13:09:23 -04:00
lf e7498fa241 chelper: Add a quick __main__ to compile c helper (#782)
Signed-off-by: Lucas Fink <software@lfcode.ca>
2018-10-16 12:21:18 -04:00
Kevin O'Connor 08d03ae0eb configfile: Strip trailing comments
The Python 2.x ConfigParser doesn't support stripping of trailing '#'
style comments.  Do that manually before parsing the config.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-16 11:45:20 -04:00
Kevin O'Connor 368703fd78 delta_calibrate: Perform coordinate descent in a background process
Run the coordinate descent in a background process so that the main
thread does not block.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-15 19:01:19 -04:00
Kevin O'Connor 46355f903e toolhead: Don't clear sync_print_time on a get_next_move_time() call
Only clear the internal sync_print_time flag if the code performs a
regular "lazy" flush of the look-ahead queue.  This helps build the
look-ahead queue even when running internal scripts.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-15 18:24:15 -04:00
Kevin O'Connor 21597f9b07 gcode: Report state message after any error in a STATUS response
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-13 17:24:37 -04:00
Kevin O'Connor 55eed2e9be gcode: Remove "Preparing to restart" message
Now that "Klipper state" messages are proactively sent, it is
redundant to send the "preparing to restart" message.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-13 17:21:15 -04:00
Kevin O'Connor d32506bd2e homing: Move homing offset adjustment logic to generic homing code
Move the "stepper phase" adjustment logic from the kinematic classes
to the generic homing.py code.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-10 14:30:09 -04:00
Kevin O'Connor 770b92863f mcu: Add a set_commanded_position() method to MCU_stepper
Add the ability to directly set the "commanded" stepper position.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-10 14:30:09 -04:00
Kevin O'Connor 459e521991 delta: Add a special case to the limit checks for the homing position
When a delta printer has different arm lengths or different endstop
positions then the homing position falls outside of the normal
printable area.  Add a special check to the range checking code to
permit this move instead of homing to a position near the actual
homing position.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-10 12:18:22 -04:00
Kevin O'Connor bd1ba86839 delta: Reorganize init()
Just code movement.  Move boundary check init to after tower init.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-10 12:18:22 -04:00
Kevin O'Connor d4bf51231a homing: Implement second home from homing.py
Move the logic for performing the second home from the kinematics
classes to the generic homing code.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-10 12:14:27 -04:00
Kevin O'Connor 3db483e270 delta: Wrap lines to 80 columns
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-10 12:14:27 -04:00
Kevin O'Connor 1146d228fa servo: Wrap lines to 80 columns
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-10 12:14:27 -04:00
Kevin O'Connor e85f9473fc stepper: Wrap lines to 80 columns
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-09 11:17:39 -04:00
Kevin O'Connor f7a7223b30 cartesian: Use homing_speed for homing retract speed
Commit b0d859f2 introduced a second_homing_speed parameter, and it
also changed the retract speed.  Revert the retract speed change (use
homing_speed when the head retracts).

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-09 11:17:39 -04:00
Kevin O'Connor 36ae433b57 cartesian: Make sure to constrain second_homing_speed to max_z_velocity
Commit b0d859f2 introduced a second_homing_speed parameter; that
parameter needs to also be constrained to the max_z_velocity.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-08 10:52:46 -04:00
alfsoft 909eef3978 display: Corrected Fan icon graphics (#753)
Added new Copyright string, corrected Fan icon graphics

Signed-off-by: Alexander Fadeev <alfsoft@gmail.com>
2018-10-07 13:38:11 -04:00
Chris Whiteford c5d94a74a5 servo: Adding support for startup value for servos (#676)
Signed-off-by: Chris Whiteford <github@chrisandtennille.com>
2018-10-05 14:35:38 -04:00
Chris Whiteford b0d859f220 stepper: Adding support for a second_homing_speed parameter (#677)
Signed-off-by: Chris Whiteford <chris@chrisandtennille.com>
2018-10-04 18:55:58 -04:00
Kevin O'Connor 97927172f1 st7920: Use display xor capability when animating glyphs
Use the xor capability of the display to animate the glyphs, which
reduces the number of glyphs needed from 4 to 2.  This should make it
easier to add future animations if desired.

Suggested by @marcio-ao.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-04 13:49:00 -04:00
alfsoft 630989c0fe display: Change Extruder, Bed and Fan icons design (#740)
Based on replies from Issue 652 (https://github.com/KevinOConnor/klipper/issues/652) only Extruder, Bed and Fan icons are changed. Feedrate icon stays untouched.

Signed-off-by: Alexander Fadeev <alfsoft@gmail.com>
2018-10-04 13:25:29 -04:00
Arksine d29eb731a9 bed_mesh: save mesh state to 'default' profile after calibration
Signed-off-by: Eric Callahan <arksine.code@gmail.com>
2018-10-04 12:53:03 -04:00
Arksine b261d31ec5 bed_mesh: Add ability to save mesh state to persistent memory
Signed-off-by: Eric Callahan <arksine.code@gmail.com>
2018-10-02 16:26:35 -04:00
Arksine 144868c600 bed_mesh: Extend BED_MESH_MAP to provide more information
Signed-off-by: Eric Callahan <arksine.code@gmail.com>
2018-10-02 16:26:35 -04:00
Kevin O'Connor 5c267e4f69 docs: Update Features.md document with tmc2660 support
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-02 14:07:33 -04:00
Janar Sööt 50d1ad9019 menu.cfg: add fan glyph to __screen2004_static & __screen2004_input
Signed-off-by: Janar Sööt <janar.soot@gmail.com>
2018-10-02 12:49:12 -04:00
Janar Sööt b2691d4730 hd44780: new text glyph - fan
Signed-off-by: Janar Sööt <janar.soot@gmail.com>
2018-10-02 12:49:12 -04:00
Kevin O'Connor 0820394e13 toolhead: M204 must update max_accel_to_decel
The max_accel_to_decel variable must not be greater than the max_accel
variable.  Make sure to check this when M204 changes max_accel.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-01 22:02:33 -04:00
Kevin O'Connor 820dd0b5e3 display: Don't error if M73 is missing a P parameter
Try to avoid raising an error on an M73 command.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-01 12:31:31 -04:00
Kevin O'Connor f49f298003 probe: Merge ProbeVirtualEndstop and ProbeEndstopWrapper wrapper classes
No need to have two wrappers around the mcu_endstop class.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-01 11:14:23 -04:00
Kevin O'Connor c5d4e14298 probe: Infer position_endstop when using probe:z_virtual_offset
Don't require (or permit) the user to specify a stepper_z
position_endstop when using the probe:z_virtual_offset mechanism.  In
that case the position_endstop should always equal the probe's
z_offset - so no need to have the user specify it.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-01 11:12:30 -04:00
Kevin O'Connor a9a0bb87fa probe: Verify the toolhead moves at least some distance on a probe
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-01 11:12:30 -04:00
Kevin O'Connor 43f2eac239 z_tilt: Wrap lines to 80 columns
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-01 11:12:30 -04:00
Kevin O'Connor c3550158bb z_tilt: Take into account probe xy offset when calculating z_adjust
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-01 11:12:30 -04:00
Kevin O'Connor 19d18c2bc1 bed_tilt: Take into account probe xy offset when calculating z_adjust
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-01 11:12:30 -04:00
Kevin O'Connor 348a41c325 bed_tilt: Remove special probe:z_virtual_endstop handling
Remove the code to calculate and track the z_offset via
position_endstop updates.  It's simpler to always save and restore the
calculated z_adjust.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-01 11:12:30 -04:00
Kevin O'Connor 33887b8c39 probe: Support manual probing at runtime
Don't require the config file to specify manual probing.  Instead,
allow the user to select manual probing on each ProbePointsHelper
invocation.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-01 11:12:30 -04:00
Kevin O'Connor 0e9b8abde2 probe: Perform multi-sample averaging in ProbePointsHelper class
Now that all the callers of ProbePointsHelper take a cartesian
coordinate for the probe locations, it's possible to perform averaging
of multi-sample probes within the class.  This simplifies the callers.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-01 11:12:30 -04:00
Kevin O'Connor e5ef15ad0f probe: Separate out manual probing from automatic probing code
Only call cmd_NEXT() for manual probing.  This simplifies the code as
the automatic probing and manual probing have slightly different
probing mechanisms.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-01 11:12:30 -04:00