Corrected the build instructions for the TH3D EZBoard V2 to include the command to convert Klipper.elf to a SREC bin format named firmware.bin. The SREC format is required for the bootloader installed on the board.
Signed-off-by: Anthony Dellett <anthony.dellett@gmail.com>
As discussed with Arksine, he has created new working settings for the Creality 4.2.x boards as the original 4.2.7 entry did not work, plus addition of SKR2 and SKR3. Tested on 4.2.2 and SKR2 and SKR3EZ.
These are using the new skip_verify functionality that was recently merged due to them using SDIO
Also removed a double definition for `monster8` it was in main definitions and aliased.
Signed-off-by: James Hartley <james@hartleyns.com>
This adds a gcode command that can be used insight the slicer to pass the total layer count and current layer information.
Signed-off-by: Stefan Dej <meteyou@gmail.com>
M105 expects get_temp method. Module crashes when gcode_id parameter
is set and M105 called. Add methods as hotfix.
Signed-off-by: Robert Pazdzior <robertp@norbital.com>
Introduce a new handle_fault() method to handle processing of sensor
faults. This simplifies the calc_temp() methods.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Send the fault information explicitly in the query_thermocouple fault
field for max6675, max31855, and max31865.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
* Update printer-anycubic-vyper-2021.cfg
better pause and end print, beeper support, mroe accurate value.
* Update printer-anycubic-vyper-2021.cfg
* Update printer-anycubic-vyper-2021.cfg
* Update printer-anycubic-vyper-2021.cfg
* Update printer-anycubic-vyper-2021.cfg
delete unnecessary gcode
* Update printer-anycubic-vyper-2021.cfg
remove unneccessary part.
* Update printer-anycubic-vyper-2021.cfg
* Update printer-anycubic-vyper-2021.cfg
according to https://www.klipper3d.org/Example_Configs.html point 7f
delete field values that are set to their default value
* Update printer-anycubic-vyper-2021.cfg
small change
* Update printer-anycubic-vyper-2021.cfg
If a tmc driver can't find the stepper config section it reports a
"missing microsteps" error which can be confusing. Provide a more
explicit error message.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
As found on discord bt user David Carey.
uart_address for y and z are swapped. Discovered while setting up sensorless homing.
Signed off by: James Hartley <james@hartleyns.com>
Added a SET_DIGIPOT command to the mcp4018 implementation.
Previously the mcp4018 was read only, and set at the time of
configuration. This allows you to change the value during a
print, which is needed for some older printers that need to
lower the stepper current during preheating.
Signed-off-by: Jake Bordens <jake@allaboutjake.com>
Also added status report for extruder_stepper objects with the
current pressure advance parameters values.
Signed-off-by: Dmitry Butyugin <dmbutyugin@google.com>
Uses existing common code for STM32. Adds a table for device-
specific PWM mappings. Adds support for enabling all TIM timer
devices. Makes it a runtime error to enable devices the code
doesn't know how to enable.
I have verified performance of the fan pins (PC6, PC7, PB15)
on the SKR Mini E3 V3.
Signed-off-by: Ben Jackson <ben@ben.com>
Removes a call to gcmd.respond_info which writes 'VARIABLE SAVED' to the
console every time the SAVE_VARIABLE command is called.
Signed-off-by: Andre LeBlanc <mapleleafmakers@gmail.com>
Raised from issue #5645, UTF-8 encoded symbols or other unexpected symbols on the UART raise an exception which causes klipper to stop. This change support UTF-8 encoded characters (from file names) as well as ignoring unexpected bytes.
Signed-off-by: Clifford Roche <clifford.roche@gmail.com>
This is a working config with full LCD and stepper settings (only thing missing is the kill switch, which did not appear to work)
Signed-off-by: Rui Carmo <rui.carmo@gmail.com>
Introduce a CONFIG_USB build symbol that is set whenever
CONFIG_USBSERIAL or CONFIG_USBCANBUS is set. Use that symbol during
setup so that the USB controller is properly initialized for both usb
serial and usb canbus bridge configurations.
This fixes the clock configuration for usb canbus bridge mode on
stm32f446.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
This is a working config with full LCD and stepper settings (only thing missing is the kill switch, which did not appear to work)
Signed-off-by: Rui Carmo <rui.carmo@gmail.com>
Apulo