Commit Graph

4584 Commits

Author SHA1 Message Date
Kevin O'Connor 06a31222d3 COPYING: Update GPLv3 license to latest text (uses https instead of http)
The latest text of the GNU GPLv3 license updates the web references to
https (instead of the older http).  Update to that latest text.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-06-03 11:28:44 -04:00
Pedro Lamas c16eab212e virtual_sdcard: Adds on_error_gcode
Signed-off-by: Pedro Lamas <pedrolamas@gmail.com>
2022-06-03 11:26:34 -04:00
BIGTREETECH dbc24ce339
config: Add BTT SKR 3 & EBB CAN V1.0 & V1.1 board cfg (#5529)
Signed-off-by: Alan.Ma from BigTreeTech <tech@biqu3d.com>
2022-06-01 11:28:10 -04:00
Kevin O'Connor 63affd7006 stm32: Rework kconfig to use CONFIG_CANSERIAL for both can.c and fdcan.c
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-06-01 10:59:10 -04:00
Kevin O'Connor 907b47b238 flash_usb: Rework flash_rp2040 code to be similar to other boards
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-06-01 10:47:31 -04:00
BIGTREETECH 1ff7261203
stm32: stm32g0b1 fdcan support (#5488)
Signed-off-by: Alan.Ma from BigTreeTech <tech@biqu3d.com>
2022-06-01 10:43:45 -04:00
Mikkel Schmidt af38d708cb
adxl345: Support recording data from multiple ADXL345's in one run, and more. (#5224)
Add PROBE and CHIP to TEST_RESONANCES

Since it's possible to specify more than one chip
in TEST_RESONANCES the CHIP parameter has been
renamed to CHIPS

Signed-off-by: Mikkel Schmidt <mikkel.schmidt@gmail.com>
2022-05-23 19:56:58 -04:00
Kevin O'Connor c7e0372c5d docs: Line wrapping in G-Codes.md
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-05-23 15:50:43 -04:00
Kevin Nguyen 3081899883
docs: Documentation on screws_tilt_calculate MAX_DEVIATION parameter (#5522)
Signed-off-by: Kevin Nguyen <ngynkvn@gmail.com>
2022-05-23 15:49:59 -04:00
Kevin O'Connor 19a478de37 stm32: Don't allow USB on internal clock for stm32f103/stm32f070
Reported by @kaidegit.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-05-23 15:35:05 -04:00
Kevin O'Connor 5a94764c38 config: Minor changes to ender3-s1 and ender3-s1pro configs
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-05-23 15:27:17 -04:00
Fisheiyy 00934e1378
config: Ender 3 S1/S1 Pro Default Configurations (#5332)
Signed-off-by: Rob Casper <myallneedsemail@gmail.com>
2022-05-23 15:23:22 -04:00
camerony f1c6f76a51
docs: Update Config_Reference.md z_hop speed (#5514)
The default z-hop speed is actually 15 mm/s according to the code in safe_z_home.py

Signed-off-by: Cameron River <camerony@gmail.com>
2022-05-23 15:05:53 -04:00
kluoyun 4490a58411
config: Create configuration file for Fly-Gemini-v2 and Fly-CDY-V3 motherboard (#5508)
Signed-off-by: Xiaokui Zhao <xiaok@zxkxz.cn>
2022-05-18 12:28:23 -04:00
th33xitus bbb06a014b docs: fix links to Config_Reference.md
Signed-off-by: Dominik Willner <th33xitus@gmail.com>
2022-05-18 12:05:28 -04:00
Kevin O'Connor 996b73e25d config: Remove hold_current from generic-th3d-ezboard-lite-v2.0.cfg
We no longer recommend setting a hold_current.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-05-17 21:22:51 -04:00
Kevin O'Connor 1c18265a62 docs: Minor wording update to Code_Overview.md
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-05-17 11:55:17 -04:00
Kevin O'Connor e8dc44a0ca docs: Update Code_Overview.md with more realistic task timing guidelines
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-05-17 11:46:38 -04:00
Kevin O'Connor 95676343db docs: Updates to Installation.md document
Recommend users obtain an example config file prior to starting the
installation.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-05-17 11:36:36 -04:00
kluoyun defce11235
config:Create configuration file for Fly-Gemini-v1 motherboard (#5474)
Create configuration file for Fly-Gemini-v1 motherboard

Add stm32f405 and generic-mellow-fly-gemini-v1.cfg to test cases

Signed-off-by: Xiaokui Zhao <xiaok@zxkxz.cn>
2022-05-14 10:36:10 -04:00
Kevin O'Connor 9c45f53b24 Makefile: Default to python3 for micro-controller build scripts
It's more likely that python3 will be installed than python2 on a
typical modern Linux distribution, so use python3 by default.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-05-13 14:07:20 -04:00
Kevin O'Connor 8268478006 homing: Fix bug in multi_complete()
Reported by @skrogh.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-05-13 13:53:17 -04:00
Kevin O'Connor c14118e9c6 misc: Import misc.h in all files defining console_sendf()
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-05-13 11:22:47 -04:00
Kevin O'Connor a6b3d2f18f stm32: Remove unused header from can.c
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-05-10 15:03:55 -04:00
Kevin O'Connor 2c441b4502 canbus: Rename CANBUS_CMD_SET_NODEID to CANBUS_CMD_SET_KLIPPER_NODEID
Rename the command name for consistency with the canbus_query.py
script.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-05-10 11:55:06 -04:00
Kevin O'Connor be4b8b17f2 docs: Minor CanBoot documentation fixes
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-05-10 11:55:06 -04:00
Eric Callahan 88731c2836 scripts: identify application in canbus_query
Signed-off-by:  Eric Callahan <arksine.code@gmail.com>
2022-05-10 11:48:06 -04:00
Eric Callahan 95d06c95e3 docs: add CanBoot documentation to bootloaders.md
Signed-off-by:  Eric Callahan <arksine.code@gmail.com>
2022-05-10 11:48:06 -04:00
Eric Callahan 5ec3939f34 lib: add flash_can.py
This script may be used to update Klipper firmware for CAN
nodes running the CanBoot bootloader.

Signed-off-by:  Eric Callahan <arksine.code@gmail.com>
2022-05-10 11:48:06 -04:00
Eric Callahan 60625f4422 stm32: add 8 KiB bootloader option for F0x2 devices
Signed-off-by:  Eric Callahan <arksine.code@gmail.com>
2022-05-10 11:48:06 -04:00
Eric Callahan 81ff8e125c canbus: send 8 bytes in the id response
The last byte contains the "node id" command, which is used to
identify the application.

Signed-off-by:  Eric Callahan <arksine.code@gmail.com>
2022-05-10 11:48:06 -04:00
Eric Callahan 3505f4cae5 canbus: add bootloader support
This adds a command which allows an external script to broadcast a
bootloader request, using a supplied UUID to match the request.
Included is a method to process requests to enter the canboot
bootloader.

Signed-off-by:  Eric Callahan <arksine.code@gmail.com>
2022-05-10 11:48:06 -04:00
3-5-20 b44eee609a
docs: Update G-Codes.md (#5487)
Typo correction: my -> by

Signed-off-by: Oscar Cetnarowski <0.007954545@proton.me>
2022-05-09 22:20:06 -04:00
Kevin O'Connor a94146b554 pins: Improve pin description checks
Make sure whitespace isn't in the pin description.  Also make sure an
alias doesn't map to an invalid pin.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-05-09 16:33:46 -04:00
Kevin O'Connor c263f76f9f stm32: Fix typo in i2c.c
Reported by @kaidegit.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-05-07 10:13:34 -04:00
Kevin O'Connor 7e76bd561a klippy: Minor changes to message protocol error
Minor indentation and variable name changes.

Don't remove linebreaks from message_protocol_error lines.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-05-06 21:06:13 -04:00
Felicia Hummel b18786bc91
klippy: Reworked the MCU protocol error message (#5470)
The MCU protocol error message often confuses users, especially after getting bombarded with the config format error line. This PR tries to improve it and has the following goals:

- Put the technical error at the end to prevent confusion and avoid the immediate jump to help channels instead of continuing to read
- Inform the user first what the type of error is (In this case: MCU Protocol error) and not at the end of the long error message
- Give the users a clear instruction what to do (pretty much unchanged), but possibly more approachable because the user is not confused by the technical error anymore
- Shows the version numbers of Klipper separate from all MCU version numbers so that it is more obvious that this is the version of Klipper
- Separates the version numbers between outdated MCUs and up-to-date MCUs, so that it becomes obvious if a MCU flash failed because the MCU doesn't disappear from the outdated list
- Previously, when viewing the errors in a web frontend, additional line breaks made it extremely hard to read the message, sometimes with as little as one word on one line. The error messages are now formatted to not have rogue line breaks, improving readability.

Signed-off-by: Felicia Alexa Hummel <felicia@drachenkatze.org>
2022-05-06 20:51:34 -04:00
Kevin O'Connor 261944cc7b graphstats: Improve labels on twinx() graphs
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-05-06 15:05:04 -04:00
Kevin O'Connor 6f0b7c7a2a graphstats: Fix system graph title
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-05-06 15:01:27 -04:00
Kevin O'Connor 661f5b08c8 docs: Fix typo in Benchmarks.md
Reported by @kaidegit.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-05-06 14:54:50 -04:00
Kevin O'Connor c4232bea2e docs: Note pins used for stm32flash in Bootloaders.md
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-05-04 13:54:42 -04:00
Kevin O'Connor 722ad4a1d2 docs: Update Example_Configs.md to note that baud should be 250000
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-04-30 14:51:14 -04:00
Kevin O'Connor e43fd4fab0 docs: Note to run DELTA_CALIBRATE before DELTA_ANALYZE in Delta_Calibrate.md
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-04-29 13:58:05 -04:00
Kevin O'Connor 1eb6afdbe5 docs: List only micro-controller names in benchmarks table in Features.md
There is concern that some users are interpreting the benchmark table
in Features.md as a list of "supported boards" or possibly
"recommended boards".  This was not the intent.

Remove the board names from the list to make it more clear the intent
is only to describe the benchmarks.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-04-29 12:20:41 -04:00
Adrian Keet d9daeb0803 config: Pull up endstop_pins on Fysetc S6/Spider
Signed-off-by: Adrian Keet <arkeet@gmail.com>
2022-04-26 20:53:14 -04:00
JamesH1978 542486fba7
stm32: Add 64kib bootloader offset option to STM32F401 (#5457)
This is needed for the Creality Ender 3 S1 with the STM32F401 chips to enable a 64kib bootloader offset

Signed-off-by: James Hartley <james@hartleyns.com>
2022-04-25 12:07:48 -04:00
Eric Callahan dc28257a75 spi_flash: reduce speed to 400K
Signed-off-by:  Eric Callahan <arksine.code@gmail.com>
2022-04-25 12:02:45 -04:00
Eric Callahan ccae1e3ec8 spi_flash: validate mcu configuration
Prior to attempting a flash, verify that the MCU is successfully
configured.

Signed-off-by:  Eric Callahan <arksine.code@gmail.com>
2022-04-25 12:02:45 -04:00
Kevin O'Connor 5517a856cc motan: Fix typo in error report
Reported by @Ludy87.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-04-23 21:50:27 -04:00
Kevin O'Connor de14d106a1 shaper_calibrate: Add missing import
Reported by @Ludy87.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-04-23 21:49:50 -04:00