8211415231
docs: Update sam4s8c step benchmarks
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-09-08 01:12:11 -04:00
d90116ef39
docs: Use tables for tick rates in Benchmarks.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-09-08 00:48:01 -04:00
a344f6d2ad
docs: Update AVR benchmarks to use gcc v5.4.0
...
Current versions of OctoPi ship with avr-gcc v5.4.0, so update the
benchmarks to use that version.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-09-06 13:24:20 -04:00
f8b25a0104
docs: Update USB transfer benchmarks
...
It appears that the faster micro-controllers may have their transfer
speeds limited by the host USB controller. Rerun the usb transfer
benchmarks using a high-speed hub.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-09-06 13:07:08 -04:00
01d2183f59
docs: Add STM32F407 benchmarks to Features.md document
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-09-05 22:42:48 -04:00
f00c50a893
docs: Add stm32f407 benchmarks to Benchmarks.md document
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-08-31 20:51:26 -04:00
7598660542
docs: Sort transfer rate benchmark by rate
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-08-17 13:55:21 -04:00
d3bd4f9622
docs: Update benchmarks with stm32f446 usb test
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-08-15 22:27:58 -04:00
43ab8e7113
docs: Fix typo in Code_Overview.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-08-09 00:13:34 -04:00
4c09d8bf02
dotstar: Initial support for "dotstar" LEDs
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-08-06 19:44:32 -04:00
30bd7c0e47
docs: Update stm32f1.md document
...
Several restrictions documented in the stm32f1.md no longer apply.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-08-05 11:40:05 -04:00
485164b8b3
docs: Update MCU_Commands with schedule_soft_pwm_out changes
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-08-01 00:23:09 -04:00
7d4c475e52
docs: Update Features.md to note Duet2 Maestro support
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-07-28 11:21:38 -04:00
a878831d5e
mcp4728: Update to better match printrbot revf requirements
...
Reported by @Grumps49.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-07-26 11:02:56 -04:00
658088b753
docs: Add initial STM32F446 benchmark results
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-07-25 18:18:42 -04:00
46041f5411
neopixel: Add support for daisy-chained chips
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-07-23 21:59:38 -04:00
197030c684
docs: Update FAQ to reference Bootloaders.md on "make flash" failure
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-07-22 10:07:34 -04:00
b7bc96c3b2
neopixel: Add initial support for "neopixel" leds
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-07-12 21:44:01 -04:00
28aa2f507a
endstop: Rename mcu end_stop commands to endstop
...
Rename the commands.
The main reason for this change is to force a micro-controller code
updated (due to important bugfix in 7fefe52d
2019-07-12 08:10:53 -04:00
0343d0c73a
firmware_retract: Remove z_hop support
...
The current z_hop support did not work correctly with common slicers
that change Z height between retract and unretract, and it did not
work correctly with slicers that issue a retract at the end of a print
and then at the beginning of the next print.
The z_hop support is therefore being removed until these issues can be
fixed.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-07-10 19:25:56 -04:00
364c22fe84
probe: Rework the PROBE_ACCURACY command parameters
...
Don't default to a Z location of 10, as that could cause damage if the
probe's z_offset is greater than 10. Instead, use the "retract
distance" method that is used for normal multi-sample probing.
Update the PROBE_ACCURACY command parameter names to use the same
parameter names as the PROBE command.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-07-10 15:21:09 -04:00
d4d8bf795b
filament_switch_sensor: add SET_FILAMENT_SENSOR gcode
...
Signed-off-by: Eric Callahan <arksine.code@gmail.com>
2019-07-10 09:57:46 -04:00
ea6f30bd99
docs: Update Protocol.md to use enumerations for pins
...
Now that pins use enumerations, update the set_digital_out command
examples.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-07-09 14:17:28 -04:00
e7dd313a96
docs: Add information on using OpenOCD to Bootloaders.md
...
Add information on using OpenOCD. Add information on flashing the
SAMD21 and SAMD51 with OpenOCD.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-07-09 13:37:17 -04:00
e19a41d0dd
docs: Add documentation for [delayed_gcode]
...
Signed-off-by: Eric Callahan <arksine.code@gmail.com>
2019-07-01 11:09:30 -04:00
57eb0e8975
docs: Update for latest changs to skew_correction
...
Signed-off-by: Eric Callahan <arksine.code@gmail.com>
2019-06-29 10:58:46 -04:00
3a3dfd51b9
docs: Add CLEAR_PAUSE to G-Codes.md
...
Signed-off-by: Eric Callahan <arksine.code@gmail.com>
2019-06-28 12:44:49 -04:00
d9d94c858a
docs: Add skew_correction.md to Overview.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-06-27 09:50:17 -04:00
a3b4543c97
skew_correction: add documentation
...
Signed-Off-By: Eric Callahan <arksine.code@gmail.com>
2019-06-26 20:16:35 -04:00
d9bddc35a1
docs: Add information on running the regression suite locally
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-06-23 17:59:23 -04:00
a2c7fd369c
docs: Note tmc2209 and tmc5160 support in Features.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-06-23 12:28:39 -04:00
ba27e0aa02
docs: Warn against using "PreloadVE" on KISSlicer
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-06-23 12:18:24 -04:00
83e6c01ada
probe: Allow probe parameters to be specified as g-code parameters
...
Add PROBE_SPEED, SAMPLES, SAMPLE_RETRACT_DIST, SAMPLES_TOLERANCE,
SAMPLES_TOLERANCE_RETRIES, and SAMPLES_RESULT parameters to the PROBE
command (and to commands that indirectly invoke a probe).
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-06-21 14:44:28 -04:00
8cce3cc8e7
graphstats: Add support for interactive graphs
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-06-19 21:12:26 -04:00
8b00580884
gcode_macro: Parse variable_X parameters using ast.literal_eval()
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-06-07 19:33:31 -04:00
a541c2f60e
docs: Update Config_Changes.md with "samples" move to probe config section
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-06-06 10:15:47 -04:00
97adca18c4
docs: Update Delta_Calibrate.md with probe location bias info
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-06-06 10:08:58 -04:00
e061029b3a
docs: Update Probe_Calibrate.md with information on common probe errors
...
Add a section describing PROBE_ACCURACY, describing probe location
bias, and describing probe temperature bias.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-06-06 10:08:58 -04:00
5989f7a8a6
firmware_retraction: Implementation of tuneable G10/G11 firmware retraction ( #1617 )
...
This supports getting and setting of retraction parameters without
having to restart klippy.
Signed-off-by: Len Trigg <lenbok@gmail.com>
2019-06-06 09:10:09 -04:00
3f96c0abd8
docs: Minor wording change to Command_Templates.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-06-04 10:39:43 -04:00
962c48ecf7
docs: Fix github pages "liquid" rendering of Command_Templates.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-06-04 10:31:03 -04:00
94c1ad7241
docs: Add an initial Command_Templates.md document
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-06-04 09:50:30 -04:00
a68f577adf
gcode_macro: Add support for SET_GCODE_VARIABLE command
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-06-04 09:50:30 -04:00
ac8f6dfe20
gcode_macro: Rename "status" helper to "printer"
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-06-04 09:50:30 -04:00
a238ec6f98
idle_timeout: Add SET_IDLE_TIMEOUT gcode
...
Signed-off-by: Eric Callahan <arksine.code@gmail.com>
2019-06-04 09:46:26 -04:00
c54b8da530
gcode: Add support for SAVE_GCODE_STATE and RESTORE_GCODE_STATE commands
...
Add commands to save and restore the current g-code state.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-05-31 10:23:56 -04:00
d6b69938ab
gcode: Don't apply the SET_GCODE_OFFSET to the next g-code command
...
The SET_GCODE_OFFSET command could cause unwanted behavior when an
offset is applied to the following g-code command. (In particular,
when the following command is an extrude only move - as in
issue #1289.)
Don't apply the offset immediately. Instead, add support for a MOVE=1
parameter which will schedule a move to apply the given offset.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-05-26 11:19:15 -04:00
500f37821d
docs: Improve bltouch v3 documentation
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-05-26 11:09:32 -04:00
c77285287b
docs: Try to be more clear that the "paper test" steps need to be run
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-05-24 22:44:00 -04:00
6c4c26c319
docs: Minor wording change to Bed_Level.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-05-23 19:31:44 -04:00
1856f95503
docs: Recommend OctoPrint 1.3.11 or later
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-05-20 23:01:04 -04:00
ad12ffa981
docs: Use markdown syntax for http links in Bootloaders.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-05-20 17:19:33 -04:00
fd1dff3f02
docs: Fix numbering in FAQ
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-05-08 16:48:14 -04:00
73fd292637
docs: Update "avr restart=command" FAQ to point to bootloaders.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-05-07 23:02:20 -04:00
8524602b6e
docs: Fix inclusion of CONTRIBUTING.md in the automatic html generation
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-04-18 23:10:32 -04:00
17dd6e5097
docs: Fix markdown table layout in html rendering
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-04-18 22:56:56 -04:00
b5f79d5e77
docs: Simplify main html page now that there is a logo
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-04-18 22:37:56 -04:00
57cf0759c0
docs: Add logos to web page
...
Also, move docs/index.md to docs/_layouts/home.html. Add a
docs/_layouts/README file.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-04-18 22:35:35 -04:00
85c01d4b6a
docs: Minor node changes to klipper logo
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-04-18 11:42:40 -04:00
49b18a6be7
docs: Update logo so that edges overlap
...
Overlapping edges reduce the effects of anti-aliasing.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-04-18 11:31:29 -04:00
9b960e63fb
docs: Add a Klipper logo
...
Signed-off-by: Jonne Kuusela <johnedwa@gmail.com>
Signed-off-by: Michael J Shephard <michael.j.shephard@gmail.com>
Signed-off-by: Thomas Herrmann <therrmann23@gmail.com>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-04-18 11:31:29 -04:00
6f34ba59cb
docs: Add an index page for the www.klipper3d.org website
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-04-16 22:00:35 -04:00
4739e28137
docs: Add a github pages html template
...
Add an html template so that each page has a navbar at the top and a
sidebar on the left with an auto-generated table of contents.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-04-16 20:55:41 -04:00
64e7235e48
docs: Rewrite the Overview.md - just list documents by category
...
Replace the Overview.md document description with a list of documents
and a brief description of their contents. The goal is to make it
easier for users to find information.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-04-16 20:45:00 -04:00
cb04e4c45d
docs: Fix alignment of tmc2208.svg
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-04-16 11:34:45 -04:00
c440c6b7aa
docs: Start of google pages _config.yml file
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-04-15 11:04:23 -04:00
e3df39245f
docs: Fixup github pages
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-04-14 22:41:23 -04:00
8a6d415745
Update CNAME
2019-04-14 21:25:54 -04:00
b90a04a5cf
Create CNAME
2019-04-14 21:21:14 -04:00
63f8d8cc79
Set theme jekyll-theme-leap-day
2019-04-14 21:17:52 -04:00
8bc9f39c58
docs: Avoid using .. in markdown links
...
Using .. in the markdown link can confuse some document processors.
Use an absolute link to github instead.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-04-14 21:12:21 -04:00
04adde9a02
docs: Update Installation.md to point to list of supported ARM mcus
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-04-06 18:47:02 -04:00
de124677b0
docs: Update BLTouch.md to refer to Probe_Calibrate.md for offset config
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-04-05 18:22:57 -04:00
9f9262cba8
docs: Minor wording changes to BLTouch.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-04-05 18:20:21 -04:00
54a2c5d58e
BLTouch: Use G90 in the BLTouch.md homing_override example
...
Reported by @sgtnoodle.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-04-05 17:49:58 -04:00
a5a6ae83ff
docs: Wrap BLTouch.md to 80 columns.
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-04-05 17:48:51 -04:00
6318bdc99b
docs: Note the python software dependency update in Config_Changes.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-04-05 11:20:36 -04:00
0615ab5f89
docs: Note the use of bus enumerations in Config_Changes.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-04-04 18:30:04 -04:00
be6b29fabf
sx1509: Convert code to use generic i2c bus support
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-04-04 18:29:30 -04:00
9bd3e80421
docs: Note that graphstats.py can produce different types of graphs
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-04-01 22:24:45 -04:00
2980c2e12c
docs: Minor wording change in MCU_Commands.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-04-01 22:04:56 -04:00
c30a6f2e6b
docs: Update Protocol documentation with enumerations
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-04-01 21:41:33 -04:00
b35e07ca2b
docs: STM32F0 benchmarks ( #1462 )
...
Signed-off-by: Eugene Krashtan <eug.krashtan@gmail.com>
2019-03-29 09:38:54 -04:00
c105adc80b
temperature_fan: Fix. Temperature fan min speed should be used ( #1405 )
...
Signed-off-by: Douglas Hammond <wizhippo@gmail.com>
2019-03-28 14:07:40 -04:00
c7330e07a4
stm32f0: Various fixes according to comment: ( #1453 )
...
* Copyright in log.c
* GPIO check completely removed
* generic/timer_irq added
* Change in doc section
Signed-off-by: Eugene Krashtan <eug.krashtan@gmail.com>
2019-03-28 10:21:51 -04:00
312cabc3f7
docs: Move benchmark information from Debugging.md to new Benchmarks.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-03-28 09:52:06 -04:00
de7444ca69
docs: Remove spurious executable flag from documents
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-03-24 12:17:12 -04:00
b79db3e3d6
docs: Documentation draft for STM32F0
...
Signed-off-by: Eugene Krashtan <Eugene.Krashtan@opensynergy.com>
2019-03-24 12:10:11 -04:00
9aadc3c7fa
docs: Also note that driver_VSENSE was removed from tmc2660 driver
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-03-22 22:40:42 -04:00
efab177645
docs: Note tmc2660 driver_HEND default change from 6 to 3
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-03-22 20:41:32 -04:00
0980b7e4ec
tmc2130: add SET_TMC_CURRENT and SET_TMC_FIELD commands ( #1419 )
...
Signed-off-by: Frank Kang <amblidex@outlook.com>
2019-03-22 20:37:03 -04:00
06c0463d44
Update sensorless homing documentation to disable second home
...
Signed-off-by: Frank Kang <amblidex@outlook.com>
2019-03-19 10:55:59 -04:00
b28e95ca1a
command: Always pass a string to the DECL_CONSTANT() macro
...
Make it clear that the name of the constant being defined is a string.
When the value being defined is also a string, use a new
DECL_CONSTANT_STR() macro.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-03-17 19:38:18 -04:00
12f6513ba2
docs: Recommend OctoPi v0.16.0
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-03-11 22:13:04 -04:00
96c4e1c5a0
docs: Update atsam usb transfer benchmarks
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-03-10 21:59:18 -04:00
d3f6dad853
controller_fan: Allow multiple controller_fan sections to be defined
...
It may be necessary to define multiple fans, so allow each config
section to be named.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-03-10 13:57:01 -04:00
5c0a2479be
screws_tilt_adjust: Add new screws_tilt_adjust tool ( #1367 )
...
Signed-off-by: Rui Caridade <rui.mcbc@gmail.com>
2019-03-08 11:47:17 -05:00
563bc37073
tmc2130: Rename driver_BLANK_TIME_SELECT to driver_TBL
...
Use the field names from the trinamic specification. This makes the
field similar to all the other driver_XXX config options.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-03-08 11:25:19 -05:00
89935c6831
docs: Update Config_Changes.md with tmc2660 changes
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-03-08 11:08:24 -05:00
789379e95b
tmc2660: Add INIT_TMC and SET_TMC_FIELD gcodes
...
Signed-off-by: Florian Heilmann <Florian.Heilmann@gmx.net>
2019-03-08 11:04:14 -05:00
d62a41b930
manual_stepper: Add support for moves with acceleration
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-03-03 13:38:10 -05:00
69491e2dab
filament_switch_sensor: update documentation
...
Signed-off-by: Eric Callahan <arksine.code@gmail.com>
2019-03-01 00:45:51 -05:00
c8d7e28a35
atsamd: Add support for programming SERCOM pins
...
Signed-off-by: Florian Heilmann <Florian.Heilmann@gmx.net>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-03-01 00:40:44 -05:00
c039b33f2a
tmc2130: Add support for INIT_TMC command
...
Signed-off-by: Frank Kang <amblidex@outlook.com>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-03-01 00:24:39 -05:00
b40a04fb8d
docs: Update Installation document to emphasize the "stay connected" step
...
Move the OctoPrint "stay connected" during error configuration step to
its own paragraph. Hopefully this will make it less likely that users
skip this step.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-02-27 20:03:44 -05:00
88ebedcc63
docs: Update Installation document to suggest using /dev/serial/by-id/
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-02-27 19:58:09 -05:00
f7d8854587
bed_mesh: simplify configuration
...
The 'bed_shape' option has been removed. The user will enter a 'bed_radius' if they have a round be, otherwise they should enter 'min_point' and 'max_point'. When the bed is round the user should supply a 'round_probe_count' option, otherwise just 'probe_count'.
Signed-off-by: Eric Callahan <arksine.code@gmail.com>
2019-02-25 13:34:14 -05:00
31987c7bcd
docs: Add a Manual_Probe.md document
...
Add information on calibrating the bed on traditional printers with a
Z endstop and bed screws.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-02-24 00:49:47 -05:00
80c8bd8b4d
bed_screws: Add a helper tool for leveling bed screws
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-02-24 00:49:47 -05:00
328bd89fc1
docs: Warn against using the TMC2208 in standalone mode
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-02-20 16:22:06 -05:00
276d5a1436
probe: Add PROBE_ACCURACY command
...
Implementation of "PROBE_ACCURACY" to measure the maximum, minimum,
average and standard deviation of a probe.
Signed-off-by: Rui Caridade <rui.mcbc@gmail.com>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-02-18 00:36:28 -05:00
82efed5e2a
docs: added an answer to the FAQ about detecting lost steps ( #1265 )
...
Signed-off-by: christian mock <cm@tahina.priv.at>
2019-02-17 22:35:58 -05:00
cc4ecef88b
mcp4018: Add initial support for the mcp4018 digipot
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-02-16 08:16:37 -05:00
0f674ef407
tsl1401cl_filament_width_sensor: Filament Width Sensor Support ( #1132 )
...
Support added for filament diameter sensor. Sample configuration parameters added to example-extras.cfg.
Signed-off-by: Mustafa YILDIZ <mydiz@hotmail.com>
2019-02-14 10:13:48 -05:00
c6d1d1bd8c
Merge pull request #1242 from john--/pr_generic_heater
...
Generic Heater Support
2019-02-14 10:08:26 -05:00
dd303ec4a9
docs: Try to make manual vs automatic probing more clear in DELTA_CALIBRATE
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-02-13 23:20:34 -05:00
6316b2c1b6
Generic Heater Support
...
Adds the ability to register a custom/generic heater through a new extra called heater_generic.
This takes a gcode_id that is reported by M105. Adds a new command to set the temperature for any heater using the syntax:
SET_HEATER_TEMPERATURE HEATER=<heater_name> TARGET=<target_temp>
Signed-off-by: John Jardine <john@gprime.net>
2019-02-14 01:15:11 +00:00
5aa4fd2b4a
docs: Note MCP4728 in Features.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-02-12 18:39:12 -05:00
2d7c3a84ee
manual_stepper: Add an "extras" module for manually controlling a stepper
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-02-12 13:38:13 -05:00
57e6acbc5c
docs: Add Bed_Level.md and Probe_Calibrate.md documents
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-02-12 13:20:32 -05:00
b0b9fc6f4a
probe: Use manual_probe helper when performing manual probes
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-02-12 13:20:32 -05:00
35ea4a137d
probe: Add PROBE_CALIBRATE command
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-02-12 13:20:32 -05:00
d14a53e160
manual_probe: Add a helper script for performing manual Z probing
...
Add MANUAL_PROBE and Z_ENDSTOP_CALIBRATE commands.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-02-12 13:20:32 -05:00
805e56008f
docs: Note command dispatch benchmark needs desktop class machine
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-02-11 16:35:03 -05:00
5ab6bcd1d7
docs: Report the actual SAMD51 3 stepper rate in the Features benchmark
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-02-11 12:57:44 -05:00
607461f7b6
docs: Update duet2 benchmarks
...
Signed-off-by: Florian Heilmann <Florian.Heilmann@gmx.net>
2019-02-10 17:59:40 -05:00
faedc77621
docs: Fix typo in Protocol.md document
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-02-10 11:53:56 -05:00
32e0d4d3ac
docs: Update atsam benchmarks
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-02-07 13:24:03 -05:00
1f9208dc66
docs: Update benchmarks
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-02-06 22:08:39 -05:00
5b9ce328e5
docs: Clarify FAQ item on running multiple instances of klippy
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-02-03 17:41:57 -05:00
c3e889a67c
docs: Add performance results for SAMD51
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-01-28 20:05:50 -05:00
893cbbab83
pause_resume: update documentation
...
Add updates to example-extras.cfg and G-Codes.md documenting pause_resume. Also add M600 (filament change) to sample-macros.cfg.
Signed-off-by: Eric Callahan <arksine.code@gmail.com>
2019-01-28 11:23:52 -05:00
90827a88de
docs: Minor wording change to step_distance FAQ
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-01-27 16:52:16 -05:00
71ef715a88
docs: Expand FAQ on why step_distance is used
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-01-27 11:29:42 -05:00
b6ccd2682c
Kconfig: Move SERIAL_BAUD to src/Kconfig and show with LOW_LEVEL_OPTIONS
...
Move the definition of SERIAL_BAUD to the main src/Kconfig file. Only
show this as an option if the user selects the ability to configure
low-level options.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-01-25 18:02:03 -05:00
15afcf69fe
docs: Improve the BLTouch documentation ( #1107 )
...
Signed-off-by Fred Sundvik <fsundvik@gmail.com>
2019-01-25 12:53:00 -05:00
76138fde5c
docs: Add a FAQ item for "Do I have to use OctoPrint?"
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-01-21 12:01:24 -05:00
8c5a94f49f
docs: Sort command dispatch table by transfer rate
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-01-20 14:17:08 -05:00
f0ac5c378f
docs: Update Debugging document with SAM3X8E usb transfer benchmark
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-01-20 00:57:48 -05:00
33f5b5f285
docs: Update Code_Overview.md with removal of printer_state() callback
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-01-08 11:34:09 -05:00
e26d1a3567
i2ccmds: Pass the i2c address as a 7-bit number (0-127)
...
The sam3 i2c code and the linux code use a 7-bit i2c address, while
the avr, lpc176x, and samd21 i2c code uses an 8-bit address with the
least significant bit always zero. A similar issue occurred in the
host code (sx1509.py and replicape.py use 7-bit addresses while
uc1701.py and mcp4451.py use 8-bit addresses).
Consistently use 7-bit addresses in all the code. This breaks
compatibility between host and mcu software, so make a change to the
config_i2c command to force users to synchronize software updates.
This also breaks common Smoothieboard configs, so update the mcp4451
code to validate the i2c_address.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-01-07 20:00:44 -05:00
f2f54290e8
docs: Add a new Config_Changes.md document
...
Add a document to track non-backwards compatible changes to the
printer config file.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-01-07 20:00:44 -05:00
549e682069
docs: Add sam4s8c benchmarks
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-01-07 19:43:56 -05:00
70bbdf9334
sam3: Rename src/sam3x8e to src/sam3
...
This is in preparation for merging sam3 and sam4 code into one
directory.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-01-07 19:33:26 -05:00
c8e04274ad
docs: Add a FAQ item for "multiple instances of klipper on the same machine"
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-01-07 13:59:52 -05:00
d015209388
docs: Add guide for sensorless homing ( #1004 )
...
Signed-off-by: Yannic Schroeder <schroeder@ibr.cs.tu-bs.de>
2019-01-07 10:39:16 -05:00
28e68075c8
docs: Suggest checking for bad wires in "lost communications" faq entry
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-01-07 10:28:25 -05:00
186d815469
docs: Documentation/FAQ, Raspii voltage
...
Add note that `under power` may be related to communication issues.
Signed-off-by: Wilfried Goesgens <dothebart@citadel.org>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-01-05 20:59:12 -05:00
df42887193
docs: Bltouch documentation ( #1073 )
...
Add documentation on howto configure the BL-Touch device with
Klipper. A second paragraph addresses possible issues with BL-Touches
Signed-off-by: Wilfried Goesgens <dothebart@citadel.org>
2019-01-05 20:24:35 -05:00
59e9b6562f
respond: An extra for sending messages to the printer host. ( #1053 )
...
I have made one change to `gcode.py` to support quoted parameter
values.
I have added support for the basic `M118` command (see
https://reprap.org/wiki/G-code#M118:_Echo_message_on_host ). I have
also added a `RESPOND` command that takes extended parameters.
`ECHO` might be a better name than `RESPOND` but is already defined
in `gcode.py`.
Signed-off-by: Alec B. Plumb <alec@etherwalker.com>
2019-01-02 17:45:35 -05:00
d7b0a7e961
docs: Add a FAQ item on how to cancel a "wait for temperature" request
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-12-20 16:25:58 -05:00
566488dc01
docs: Add a FAQ item on Raspberry Pi reboots
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-12-20 16:25:58 -05:00
e4dac1039d
docs: Update release notes for v0.7.0 release
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-12-20 09:15:24 -05:00
e0b2d7c51d
bltouch: Add a BLTOUCH_DEBUG command
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-12-03 22:52:32 -05:00
e505ab0df1
samd21: Add support for flashing an application via the bossac tool
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-11-30 22:22:42 -05:00
bb41765714
docs: Minor update to Code_Overview.md with further kinematics info
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-11-17 14:56:46 -05:00
cd1e669306
docs: Fix typo in command dispatch benchmarks
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-11-16 20:38:30 -05:00
64a1837fec
docs: Round pru command parsing benchmark
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-11-16 20:31:41 -05:00
c349863988
docs: Add information on command parsing benchmarks
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-11-16 20:21:05 -05:00
52fa91fb9a
docs: Update benchmarks
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-11-16 18:59:55 -05:00
f973886dac
docs: Minor rewording in Endstop_Phase.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-11-14 09:46:21 -05:00
e541466591
servo: This patch create ability to enable/disable attached servo. ( #880 )
...
Cheap mechanical servos have small flickering. When this servo stay on one position, this flickering slowly destroy internal potentiometer and make servo unusable. Many mechanisms need servo only to change position. Therefore I create this minor path to enable/disable servo. It stop pulses for this servo, that's all.
Corresponding G-code is:
SET_SERVO SERVO=config_name [WIDTH=] [ENABLE=<0|1>]
SET_SERVO SERVO=config_name [ANGLE=] [ENABLE=<0|1>]
For example:
SET_SERVO SERVO=touch ANGLE=80 ENABLE=1 ; enable servo and set position
G4 P200 ; wait 200ms
SET_SERVO SERVO=touch ENABLE=0 ; disable servo
This patch add one option to servo configuration:
enable: <False/True> # default True
It not have impact to user code existing already because it is optional parameter and default value is same as original behavior.
Signed-off-by: Jiri Dobry <jdobry@centrum.cz>
2018-11-14 09:38:09 -05:00
31730fa031
docs: Minor wording change to Endstop_Phase.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-11-13 18:44:33 -05:00
c55842b428
docs: Note when endstop phases are useful in Endstop_Phase.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-11-13 18:36:00 -05:00
8d4f7db66e
docs: Fix typo in Bootloaders.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-11-13 14:41:51 -05:00
097e6c524b
docs: Fix link in FAQ document
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-11-13 14:40:35 -05:00
5f9ce32fae
docs: Be more clear that a baud of 250000 is recommended
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-11-13 14:06:27 -05:00
c4058f71fb
docs: Clarify M109/M190 in G-Code documentation
...
Signed-off-by: Lucas Fink <software@lfcode.ca>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-28 14:22:30 -04:00
057acb07b7
docs: Add a Slicers.md document
...
Add some information on configuring a slicer for use with Klipper.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-28 10:47:32 -04:00
47e45ab391
docs: Note the use of gcode_macro in G-Codes.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-28 10:38:03 -04:00
a33792f07e
util: Fix versioning when gitdir is absent ( #809 )
...
The gitdir previously could be absent and produce a version of "" in
spite of checks for it. Fixed.
Parent directories with shlex-interpreted characters in their names
could be misinterpreted. Removed shlex parsing.
Packagers may want to remove the git history to slim down the package
size, so add an option for using a file 'version' in the klippy
directory to set version without using git.
Signed-Off-By: Lucas Fink <software@lfcode.ca>
2018-10-27 10:44:38 -04:00
a7c8476e98
docs: Update pressure advance doc to note it only impacts the extruder
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-25 19:09:47 -04:00
3d7e8fa5ec
docs: Note impact of warping during pressure advance tuning
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-25 12:10:47 -04:00
ca7dd8bfd4
docs: Update Pressure_Advance.md - don't set square_corner_velocity=0
...
Setting the square corner velocity to zero would cause stuttering
during the test if a bed mesh is in effect. It's possible to get the
desired effect by reducing the square corner velocity and setting the
pressure advance lookahead time instead.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-25 11:43:03 -04:00
b6bf455155
tmc2660: Add endstop phase detection functionality to TMC2660 extra ( #816 )
...
Signed-off-by: Florian Heilmann <Florian.Heilmann@gmx.net>
2018-10-24 16:01:12 -04:00
04a12ec9bd
docs: Update stm32f1.md - usb is now supported.
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-22 13:22:58 -04:00
e4bb90a1ca
bed_mesh: Do not automatically run G28 on BED_MESH_CALIBRATE / BED_MESH_MAP
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-22 11:26:01 -04:00
925562cfb1
delta_calibrate: Do not automatically run G28 on DELTA_CALIBRATE
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-22 11:26:01 -04:00
ca04caa42c
docs: Fix SAM4E8E benchmark test revision
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-22 11:21:43 -04:00
2b81b2935c
docs: Update SAM4E8E benchmarks
...
New benchmark numbers reported by @FHeilmann.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-22 11:18:55 -04:00
b903f84c80
docs: Replace get_status example with get_clock in Protocol.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-20 11:53:32 -04:00
530a37196c
docs: Update LPC176x benchmarks
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-18 09:55:02 -04:00
0079311b0b
docs: Add an Endstop_Phase.md document
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-16 13:09:49 -04:00
1e71909d02
endstop_phase: Add support for an ENDSTOP_PHASE_CALIBRATE command
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-16 13:09:49 -04:00
f5c99c1dec
docs: Update benchmarks for Arduino Due
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-13 11:57:13 -04:00
aa693fbdc1
docs: Updates to stm32f103 benchmarks
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-11 10:57:24 -04:00
75fa74313c
stm32f1: Add support for building with bootloader support
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-11 10:50:51 -04:00
bc5e961d73
stm32f1: Initial support for serial over USB
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-11 10:50:51 -04:00
1e07be4db4
docs: Add a "Lost communication with MCU" section to the FAQ
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-09 11:22:28 -04:00
852d1666bb
docs: Fix typo in BED_MESH_PROFILE description in G-Codes.md
...
Reported by @fiveNinePlusR
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-04 19:01:18 -04:00
b261d31ec5
bed_mesh: Add ability to save mesh state to persistent memory
...
Signed-off-by: Eric Callahan <arksine.code@gmail.com>
2018-10-02 16:26:35 -04:00
5c267e4f69
docs: Update Features.md document with tmc2660 support
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-02 14:07:33 -04:00
33887b8c39
probe: Support manual probing at runtime
...
Don't require the config file to specify manual probing. Instead,
allow the user to select manual probing on each ProbePointsHelper
invocation.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-01 11:12:30 -04:00
4b5db04f78
docs: Add Delta_Calibrate.md guide with "enhanced delta calibration"
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-09-25 13:48:46 -04:00
1165c0c9c5
docs: Additional images for enhanced calibration procedure reference ( #639 )
...
Signed-off-by: Charles Galant <cgalant@cogwheel.net>
2018-09-25 13:48:46 -04:00
0b2c89ecaf
delta_calibrate: Initial support for enhanced delta calibration
...
Add support for an enhanced delta calibration routine that performs XY
dimension calibration.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-09-25 13:48:46 -04:00
5a1b2d61ae
pid_calibrate: Support saving calibration data via SAVE_CONFIG
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-09-25 13:48:46 -04:00
531134f092
configfile: Add support for rewriting the printer config file
...
Add support for writing back the main printer config file with
additional calibration data stored in it.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-09-25 13:48:46 -04:00
3d4ee9e962
docs: Add stm32f1.md link to Overview.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-09-20 20:11:04 -04:00
174754299a
heater: Add new TURN_OFF_HEATERS command
...
Add a command that will turn off all heaters in the printer. Run this
command in the default idle_timeout action.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-09-18 16:01:07 -04:00
Kevin O'Connor